Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating
Source abstract
Abstract
Abstract A spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO coating was deposited on stainless steel substrate by unbalanced magnetron sputtering system. Each individual layer of the tandem absorber was optimized by varying the reactive gas flow rates (C 2 H 2 , N 2 and O 2 ) and target power densities (Ti, Al and Si). The optimized tandem absorber shows a solar absorptance of 0.960 and an emittance of 0.15 at 82 °C, measured using solar spectrum reflectometer and emissometer, respectively. In order to study the optical properties of the deposited tandem absorber at high operating temperatures the reflectance spectra of the tandem absorber were measured at temperatures ranging from 80 °C to 500 °C by UV–Vis–NIR spectrophotometer and FTIR spectrometers. The reflectance spectra of the as-deposited sample and after high temperature reflectance measurements did not show any significant changes. The thermal emittance of the tandem absorber at high temperatures (80–500 °C) was studied in detail. At the temperature of 200 °C, 300 °C, 400 °C and 500 °C the tandem absorber shows the emittance of 0.152–0.157, 0.181–0.19, 0.214–0.246 and 0.251–0.275, respectively with an absorptance of ~0.930. These results show the good selectivity of the tandem absorber even at high operating temperatures (e.g., 500 °C) with a photothermal conversion efficiency of 88%, thus demonstrating that the tandem absorber is suitable for solar thermal power generation applications. Reflectance and roughness data of the absorber coating post annealing in air up to 600 °C for 2 h, carried out independently, corroborated the present results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Solar-Powered Water Purification Methods
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Iron oxidation kinetics study by using infrared spectral emissivity measurements below 570°C10.1016/j.corsci.2007.05.029 ↗
2. Heat flux-based emissivity measurement10.1063/1.1867115 ↗
3. Modest · 2003
4. DeWitt · 1988
5. Incropera · 2002
6. Control of thermal emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications10.1016/j.solmat.2014.11.002 ↗
7. Emissivity reference paints for high temperature applications10.1016/j.measurement.2007.10.007 ↗
8. An experimental method for making spectral emittance and surface temperature measurements of opaque surfaces10.1016/j.jqsrt.2010.08.020 ↗
9. Tandem structure of aligned carbon nanotubes on Au and its solar thermal absorption10.1016/S0927-0248(01)00083-6 ↗
10. Review of physical vapor deposited (PVD) spectrally selective coatings for mid – and high – temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
11. Comparison of linear Fresnel and parabolic trough collector power plants10.1016/j.solener.2011.06.020 ↗
12. Thermal modeling of a calorimetric technique for measuring the emittance of surfaces and coatings10.1016/0040-6090(93)90660-H ↗
13. T. Effertz, J. Pernpeintner, B. Schiricke, Steady state calorimetric measurement of total hemispherical emittance of cylindrical absorber samples at operating temperature, in: Proceedings of the 22nd Solar PACES Conference, 11-14 Oct, Abu Dhabi, UAE, 2016.10.1063/1.4984327 ↗
14. Spectral emissivity measurements of candidate materials for very high temperature reactors10.1016/j.nucengdes.2011.10.067 ↗
15. Characterization of high temperature solar thermal selective absorber coatings at operation temperature10.1016/j.egypro.2014.03.219 ↗
16. Development of optical tools for the characterization of selective solar absorber at elevated temperature
17. Efficiency and behavior of textured high emissivity metallic coatings at high temperature10.1016/j.matdes.2015.05.073 ↗
18. Apparatus for measuring spectral emissivity of solid materials at elevated temperatures10.1007/s10765-016-2058-9 ↗
19. L. Mercatelli, M. Meucci, E. Sani, Design and test of a new facility for assessing spectral normal emittance of solid materials at high temperature, in: Proceedings SPIE 9744, Optical Components and Materials XIII, 97440H (February 24, 2016).10.1117/12.2208334 ↗
20. Optical characterization of TiAlNx/TiAlNy/Al2O3 tandem solar selective absorber coatings10.1016/j.solmat.2017.06.007 ↗
21. Use of a high temperature integrating sphere reflectometer for surface temperature measurements10.1007/s10765-007-0180-4 ↗
22. An FTIR based instrument for measuring spectral emittance of material at high temperature10.1063/1.1141538 ↗
23. Thermal return reflection method for resolving emissivity and temperature in radiometric measurements10.1063/1.1516864 ↗
24. Very low emittance solar selective surfaces using new film structures10.1063/1.351510 ↗
25. Accurate determination of the total hemispherical emittance and solar absorptance of opaque surfaces at elevated temperatures10.1016/j.solmat.2014.10.026 ↗
26. High emissivity coatings for high temperature application: progress and prospect10.1016/j.tsf.2009.03.175 ↗
27. Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for high-temperature solar thermal power application10.1016/j.solmat.2015.04.018 ↗
28. Optimization of process parameters to achieve spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO high temperature solar absorber coating10.1016/j.solener.2016.09.010 ↗
29. Deposition of TiAlN coatings using reactive bipolar pulsed direct current unbalanced magnetron sputtering10.1016/j.vacuum.2008.04.075 ↗
30. Archimede Solar Receiver Tube for Thermodynamic Power Plant Technical Data. Archimede Solar Energy. 〈http://www.archimedesolarenergy.com〉.
31. Importance of the spectral emissivity measurements at working temperature to determine the efficiency of a solar selective coating10.1016/j.solmat.2015.04.009 ↗
32. First spectral emissivity study of a solar selective coating in the 150–600°C temperature range10.1016/j.solmat.2013.07.002 ↗
33. Anti-reflective coatings: a critical, in-depth review10.1039/c1ee01297e ↗