Materials efficient deposition and heat management of CuInSe2 micro-concentrator solar cells
Source abstract
Abstract
Thin-film solar cells based on Cu(In, Ga)Se2 chalcopyrite materials have achieved record power conversion efficiencies (PCE) above 22%, higher than any other thin film technology. Here, a proof-of-principle for Cu(In, Ga)Se2 solar cells with a reduced materials consumption by a factor of ~100 is demonstrated for which simulations indicate an even higher PCE potential. The concept is based on using micrometer-sized solar cells onto which sunlight is concentrated using a lens array. Thereby, all incoming sunlight is absorbed in solar cells that only cover a fraction (on the order of 1/100) of the surface, creating thus significant material savings. A fabrication process based on selective growth of CuInSe2 micro solar cells is presented, using electrodeposition into holes of an insulating SiO2 layer on a Mo back electrical contact. Proof-of-principle micro solar cells using this materials-savings approach are realized and characterized. Additionally, the heat management of micro-concentrator solar cells is studied using finite element simulations. For square micro solar cells up to 100 µm side length the temperature increase due to the concentrated sunlight can be kept below 4 °C above that of a flat panel solar cell. An increase of the PCE by 4.9% is estimated, considering the combined effect of the open circuit voltage increase due to concentrated sunlight, and the PCE decrease due to the temperature increase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Effects of heavy alkali elements in Cu(In,Ga)Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. 20.8% PERC Solar Cell on 156mm×156mm P-Type Multicrystalline Silicon Substrate10.1109/JPHOTOV.2015.2489881 ↗
3. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
4. Materials Availability Expands the Opportunity for Large-Scale Photovoltaics Deployment10.1021/es8019534 ↗
5. Solar cell efficiency tables (version 46)10.1002/pip.2637 ↗
6. Cu(In, Ga)Se2 microcells: high efficiency and low material consumption10.1063/1.4791778 ↗
7. Ultrathin silicon solar microcells for semitransparent, mechanically flexible and microconcentrator module designs10.1038/nmat2287 ↗
8. Printing-based assembly of quadruple-junction four-terminal microscale solar cells and their use in high-eciency modules10.1038/nmat3946 ↗
9. Wide-angle planar microtracking for quasi-static microcell concentrating photovoltaics10.1038/ncomms7223 ↗
10. A GaAs Solar Cell with an Efficiency of 26.2% at 1000 Suns and 25.0% at 2000 Suns10.1109/16.918225 ↗
11. Thin-film microcells: a new generation of photovoltaic devices10.1117/2.1201305.004808 ↗
12. S.JutteauM.PaireF.ProiseL.LombezJ.GuillemolesMicro solar concentrators: Design and fabrication for microcells arrays. 42nd IEEE Photovoltaic Specialist Conference (PVSC), pp. 1–4, 2015.10.1109/PVSC.2015.7355767 ↗
13. Toward microscale Cu(In,Ga)Se2 solar cells for efficient conversion and optimized material usage: theoretical evaluation10.1063/1.3460629 ↗
14. A.DelahoyA.Payne, Determination of the internal series resistance of CIS and CIGS photovoltaic cell structures. 25th IEEE Photovoltaic Specialists Conference (PVSC), pp. 841–844, 1996.10.1109/PVSC.1996.564259 ↗
15. Resistive and thermal scale effects for Cu(In, Ga)Se2 polycrystalline thin film microcells under concentration10.1039/c1ee01661j ↗
16. Microscale solar cells for high concentration on polycrystalline Cu(In,Ga)Se2 thin films10.1063/1.3604789 ↗
17. Cu(In,Ga)Se2 mesa diodes for the study of edge recombination10.1016/j.tsf.2014.11.033 ↗
18. Microanalysis of post-deposition annealing of Cu(In,Ga)Se2 solar cells10.1016/j.solmat.2012.07.026 ↗
19. Fabrication and characterization of ordered CuIn(1−x)GaxSe2 nanopore films via template-based electrodeposition10.1186/1556-276X-7-675 ↗
20. Electrodeposition of CuInSe2 absorber layers from pH buffered and non-buffered sulfate-based solutions10.1016/j.tsf.2007.07.142 ↗
21. Inline Cu(In,Ga)Se2 Co-evaporation for high-efficiency solar cells and modules10.1109/JPHOTOV.2013.2256232 ↗
22. Introduction of Si PERC rear contacting design to boost efficiency of Cu(In,Ga)Se2 solar cells10.1109/JPHOTOV.2014.2350696 ↗
23. Lattice vibrations of CuInSe2 and CuGaSe2 by Raman microspectrometry10.1063/1.352195 ↗
24. Secondary crystalline phases identification in Cu2ZnSnSe4 thin films: contributions from Raman scattering and photoluminescence10.1007/s10853-014-8446-2 ↗
25. R.KlenkR.MennerD.CahenH.SchockProceedings of the IEEE PV Specialists Conference1: 481, 1990.
26. Characterization of Cu(In,Ga)Se2 thin films prepared by thermal crystallization on Mo/glass substrate10.1016/S0927-0248(00)00265-8 ↗
27. Formation and characterisation of MoSe2 for Cu(In,Ga)Se2 based solar cells10.1016/j.tsf.2004.11.098 ↗
28. Developing an understanding of the processes controlling the chemical bath deposition of ZnS and CdS10.1039/a804692a ↗
29. Properties of cadmium sulfide thin films deposited by chemical bath deposition with ultrasonication10.1016/S0038-092X(98)00047-4 ↗
30. NEXCIS press release, NEXCIS achieves a new record performance @17.3% certified pixel measurement with its CIGS PV technology, 23.10.2014.
31. Cooling of photovoltaic cells under concentrated illumination: a critical review10.1016/j.solmat.2004.09.003 ↗
32. A.VirtuaniD.PavanelloG.Friesen, Overview of Temperature Coefficients of Different Thin Film Photovoltaic Technologies. Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, SeptemberValencia, Spain, pp. 4248–4252, 2010.
33. Deceglie MG, Silverman TJ, Marion B, Kurtz SR. Metastable changes to the temperature coefficients of thin-film photovoltaic modules. Proceedings of the IEEE Photovoltaic Specialist Conference 2014; p. 0337–340.10.1109/PVSC.2014.6924926 ↗