Sodium nitrate thermal behavior in latent heat thermal energy storage: A study of the impact of sodium nitrite on melting temperature and enthalpy
Source abstract
Abstract
Using direct steam generation in concentrated solar power plant leads to the development of new storage systems, which may include a latent heat thermal energy storage module. With this module, the behavior of the storage system matches the thermal behavior of the water used as heat transfer fluid. Sodium nitrate, which is already used in such lab-scale systems, is able to fulfill the conditions to assume the role of phase change material to store thermal energy. However, this material may evolve during its lifetime, either due to thermal decomposition or by corrosion phenomena, both leading to the reduction of nitrates to nitrites. Such evolution has been reported for the so-called "solar–salt" (NaNO3–KNO3 60:40 wt%), driving to the reduction of the melting temperature and latent heat. It is thus important to study the evolution of these properties in the case of sodium nitrate. The work proposed here aims to characterize sodium nitrate–nitrite mixture by differential scanning calorimetry for comparison with pure sodium nitrate (laboratory grade and industrial grade). Since the considered compounds are not at the eutectic composition, their melting does not occur at a fixed and single temperature. Thus, a calorimetric method using isothermal steps has been used in order to determine the evolution of involved energy during the melting of samples versus temperature for each sample. The results show the spreading of the melting over a range of temperature and the shifting of the liquidus to lower temperature when the sodium nitrite part increases. Moreover, a decrease in latent heat up to nearly 15% was observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Thermal energy storage for direct steam generation10.1016/j.solener.2010.08.015 ↗
2. D. Laing, T. Bauer, W.D. Steinmann, D. Lehmann, Advanced high temperature latent heat storage system—design and test results, in: Proceedings of the 11th International Conference Thermal Energy Storage, Effstock, Stockholm, Sweden, 14–17 June. 〈https://intraweb.stockton.edu/eyos/energy_studies/content/docs/effstock09/Session_4_1_High_Temperature_Applications/27.pdf〉 (accessed 25.09.15), 2009.
3. Characterization of sodium nitrate as phase change material10.1007/s10765-011-1113-9 ↗
4. Thermodynamic study of corrosion of iron in NaNO3–NaNO2 mixtures10.1149/1.2100435 ↗
5. Differential scanning calorimetry of sodium and potassium nitrates and nitrites10.1016/0040-6031(82)87002-0 ↗
6. A.M. Kruizenga, D.D. Gill, M. LaFord, G. McConohy, Corrosion of High Temperature Alloys in Solar Salt at 400, 500, and 680°C, Sandia National Laboratories. 〈http://prod.sandia.gov/techlib/access-control.cgi/2013/138256.pdf〉 (accessed September 30, 2015), 2013.10.2172/1104752 ↗
7. Eaton · 2005
8. Höhne · 2003
9. Enthalpy of phase change materials as a function of temperature: required accuracy and suitable measurement methods10.1007/s10765-009-0641-z ↗
10. Quantitative aspects of differential scanning calorimetry10.1016/S0040-6031(97)00188-3 ↗
11. Thermodynamic study of the condensed phases of NaNO3, KNO3 and CsNO3 and their transitions10.1016/0040-6031(95)02337-2 ↗
12. Study on differential scanning calorimetry analysis with two operation modes and organic and inorganic phase change material (PCM)10.1016/j.tca.2012.11.027 ↗
13. Determination of the enthalpy of PCM as a function of temperature using a heat-flux DSC-A study of different measurement procedures and their accuracy10.1002/er.1443 ↗
14. Phase diagram of system sodium nitrate and nitrite
15. Bildung und Zersetzung von Mischkrystallen zwischen Alkalinitraten und -Nitriten10.1002/zaac.19090640112 ↗
16. Determination of solidus line in NaNO2–NaNO3 system10.1007/BF00852059 ↗
17. Diagramme de phases du système binaire NaNO2–NaNO3
18. NaNO2+NaNO3 phase diagram: new data from DSC and Raman spectroscopy10.1021/je050105n ↗