Effect of aluminum sulfate addition on the thermal storage performance of mesoporous SBA-15 and MCM-41 materials
Source abstract
Abstract
Abstract Aluminum sulfate salt hydrate was dispersed on two different porous supports (MCM-41 and SBA-15) presenting a hydrophobic behavior at low relative humidity (P/P0≤0.3) with the objective to increase the energy density of the formed composites compared to pure host materials. Two different series of composite materials (MCM-41(Al2)x and SBA-15(Al2)x) with 3, 5 and 7 wt% of aluminum sulfate were prepared by wetness impregnation method and tested for thermochemical heat storage at low-temperature. The dehydration heats, the water sorption capacities and the physicochemical characteristics have been determined for both series of composites. MCM-41(Al2)x and SBA-15(Al2)x composites exhibit much higher sorption capacities (up to 0.17 and 0.09 kgH2O kg−1 respectively) than those observed for pure host materials, 0.04 and 0.02 kgH2O kg−1 respectively for MCM-41 and SBA-15 at P/P0=0.3. These improved results were clearly linked to the interaction of water vapor with the confined salt. Water was found to be sorbed by the impregnated salt rather than by the host matrix. The textural properties such as specific surface area, pore size distributions and pore volumes are the most relevant properties of these materials in relation with their potential use. The best performance was observed for MCM-41(Al2)7 composite with ≈612 kJ kg−1sample. This encouraging result indicates that it is possible to use MCM-41(Al2)x and SBA-15(Al2)x composites at low water vapor pressure for thermochemical heat storage purposes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and Cooling Systems · Phase Change Materials Research · Layered Double Hydroxides Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Exploiting solar energy potential through thermal energy storage in Slovenia and Turkey10.1016/j.rser.2013.04.020 ↗
2. Studies of the water adsorption on zeolites and modified mesoporous materials for seasonal storage of solar heat10.1016/j.solener.2003.07.036 ↗
3. Calorimetric investigation on zeolites, AlPO4׳s and CaCl2 impregnated attapulgite for thermochemical storage of heat10.1016/j.tca.2005.01.009 ↗
4. Heats of water sorption studies on zeolites-MgSO4 composites as potential thermochemical heat storage materials10.1016/j.solmat.2013.01.020 ↗
5. Synthesis and water sorption properties of a new composite CaCl2 confined into SBA-15 pores10.1016/j.micromeso.2009.09.023 ↗
6. Composites salt inside porous matrix for adsorption heat transformation: a current state-of-the-art and new trends10.1093/ijlct/cts050 ↗
7. Novel sorbents of ethanol salt confined to porous matrix for adsorptive cooling10.1016/j.energy.2009.04.001 ↗
8. Zeolite-MgCl2 composites as potential long-term heat storage materials: influence of zeolite properties on heats of water sorption10.1016/j.solmat.2014.05.016 ↗
9. Enhancing the heat storage density of silica–alumina by addition of hygroscopic salts (CaCl2, Ba(OH)2, and LiNO310.1016/j.solmat.2015.04.032 ↗
10. Chemical heat accumulators: a new approach to accumulating low potential heat10.1016/0927-0248(96)00010-4 ↗
11. New composite sorbent CaCl2 in mesopores for sorption cooling/heating10.1016/S1290-0729(02)01339-X ↗
12. Selective water sorbents for multiple applications. 10. Energy storage ability10.1023/A:1005616420331 ↗
13. New family of solid sorbents for adsorptive cooling: material scientist approach10.1134/S1810232807020026 ↗
14. Novel materials for adsorptive heat pumping and storage: screening and nanotailoring of sorption properties10.1252/jcej.07WE228 ↗
15. Optimal adsorbent for adsorptive heat transformers: dynamic considerations10.1016/j.ijrefrig.2009.01.022 ↗
16. A family of new working materials for solid sorption air conditioning systems10.1016/S1359-4311(01)00072-2 ↗
17. The size of sorbents in low pressure sorption or thermochemical energy storage processes10.1016/j.energy.2014.10.013 ↗
18. Selective water sorbents for multiple applications. 1. CaCl2 confined in mesopores of silica gel: sorption properties10.1007/BF02068130 ↗
19. Selective water sorbents for multiple applications. 5. LiBr confined in mesopores of silica gel: Sorption properties10.1007/BF02475434 ↗
20. Environmentally benign working pairs for adsorption refrigeration10.1016/j.energy.2004.05.005 ↗
21. Ammonia sorption on composites CaCl2 in inorganic host matrix: isosteric chart and its performance10.1093/ijlct/1.3.191 ↗
22. Vapor phase propylene epoxidation over Au/Ti-MCM-41 catalysts prepared by different Ti incorporation modes10.1016/S0926-860X(02)00451-9 ↗
23. Synthesis, characterization and selective oxidation properties of Ti-containing mesoporous catalysts10.1016/j.apcata.2005.10.006 ↗
24. A grand canonical monte-carlo simulation study of xenon adsorption in a vycor-like porous matrix10.1023/A:1008993328699 ↗
25. Adsorption study of surface and structural properties of MCM-41 materials of different pore sizes10.1021/jp962000k ↗
26. Application of large pore MCM-41 molecular sieves to improve pore size analysis using nitrogen adsorption measurements10.1021/la970776m ↗
27. Preparation of spherical MCM-41 molecular sieve at room temperature: influence of the synthesis conditions in the structural properties10.1016/j.ceramint.2012.05.007 ↗
28. A new family of mesoporous molecular sieves prepared with liquid crystal templates10.1021/ja00053a020 ↗
29. Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism10.1038/359710a0 ↗
30. X-ray diffraction studies of freezing and melting of water confined in a mesoporous adsorbent (MCM-41)10.1063/1.474936 ↗
31. Freezing and melting of water in a single cylindrical pore: the pore-size dependence of freezing and melting behavior10.1063/1.478372 ↗
32. Melting and freezing of water in ordered mesoporous silica materials10.1039/b010086m ↗
33. Chiral Mn(III) salen complexes covalently bonded on modified MCM-41 and SBA-15 as efficient catalysts for enantioselective epoxidation of nonfunctionalized alkenes10.1016/j.jcat.2005.11.042 ↗
34. Preparation and humidity sensing properties of Fe-doped mesoporous silica SBA-1510.1016/j.snb.2008.08.036 ↗
35. A study of the water vapor sorption isotherms of hardened cement pastes: possible pore structure changes at low relative humidity and the impact of temperature on isotherms10.1016/j.cemconres.2013.11.008 ↗
36. Characterization of the hydrophobicity of mesoporous silicas and clays with silica pillars by water adsorption and DRIFT10.1016/j.jcis.2007.09.035 ↗
37. Water adsorption in porous metal–organic frameworks and related materials10.1021/ja500330a ↗
38. Hydration of MCM-41 studied by sorption calorimetry10.1021/jp072474r ↗
39. Mechanism of adsorption of water, benzene, and nitrogen on Al-MCM-41 and effect of coking on the adsorption10.1021/la0006723 ↗
40. Adsorption studies on ordered mesoporous materials (MCM-41)10.1016/S0167-2991(97)80637-4 ↗
41. Study on humidity sensing properties based on composite materials of Li-doped mesoporous silica A-SBA-1510.1016/j.snb.2007.07.012 ↗
42. Composites CaCl2/SBA-15 for adsorptive transformation of low temperature heat: pore size effect10.1016/j.ijrefrig.2011.02.007 ↗
43. The role of alum in historical papermaking
44. Thermal decomposition of precipitated low bulk density basic aluminium sulfate10.1016/j.matchemphys.2004.04.024 ↗
45. A systematic multi-step screening of numerous salt hydrates for low temperature thermochemical energy storage10.1016/j.apenergy.2014.02.053 ↗
46. Thermal decomposition of hydrated aluminum sulfate precipitated from acetic acid solution10.1111/j.1151-2916.1979.tb09492.x ↗
47. H.A. Zondag, B.W.J. Kikkert, S. Smeding, M. Bakker. Thermochemical seasonal solar heat storage with MgCl2·6H2O: first up scaling of the reactor, in: Proceedings of the International Conference for Sustainable Energy Storage, 2011.
48. Dehydration behavior of aluminum sulfate hydrates10.1111/j.1151-2916.1981.tb09588.x ↗
49. Preparation and characterisation of the nonahydrate and pentahydrate of aluminum sulfate10.1016/0040-6031(82)85069-7 ↗
50. Physical and chemical properties of a highly viscous aluminum sulfate melt10.1021/ie9800445 ↗
51. The effect of sulfate on aluminum concentrations in natural waters: some stability relations in the system Al2O3–SO3–H2O at 298K10.1016/0016-7037(82)90168-5 ↗
52. Dissociation pressures and related measurements in the system aluminum sulfate–water10.1021/ja01637a007 ↗
53. Evaluation of pressure–temperature diagrams from microthermogravimetry and from differential thermal analysis at constant vapor pressure for hydrate systems with imperfect reversibility
54. The degrees of hydration of aluminum sulfate by microthermogravimetry and differential thermal microanalysis at constant water vapor pressure
55. Thermal decomposition kinetics of aluminum sulfate hydrate10.1007/s10973-009-0389-5 ↗
56. The basic aluminium sulphates10.1039/jr9490002239 ↗
57. Thermodynamic properties and phase transitions of salt hydrates between 270 and 400 K I. NH4Al(SO4)2·12H2O, KAl(SO4)2·12H2O, Al2(SO4)3·17H2O, ZnSO4·7H2O, Na2SO4·10H2O, and Na2S2O3·5H2O10.1016/0021-9614(82)90152-5 ↗
58. Identification by X-Ray diffractometry of the crystallized phases observed during dehydration of Al2(SO4)3·16H2O and Cr2(SO4)3·16H2O
59. Heats of Formation of Al2(SO4)3·6H2O, Al2 (SO4)3, KAl(SO4)2·12H2O, and KAl(SO4)210.1021/ja01218a034 ↗
60. Kinetics of the decomposition of freeze-dried aluminum sulfate and ammonium aluminum sulfate10.1111/j.1151-2916.1971.tb12386.x ↗
61. Kinetics of the thermal decomposition of aluminum sulfate10.1016/0040-6031(84)87154-3 ↗
62. Kinetics of the multistage dehydration of aluminum sulfate hydrate10.1016/0040-6031(84)85135-7 ↗
63. The thermal decomposition of aluminum sulfate in different gas phase environments10.1016/0040-6031(92)85263-U ↗
64. Comprehensive kinetic studies on isothermal and non-isothermal reactions of some aluminium compounds10.1007/BF02546901 ↗
65. Aluminum sulphate hydrates: kinetics of the thermal decomposition of aluminum sulphate using different calculation methods10.1007/BF02547008 ↗
66. Thermoanalytical studies on the preparation of industrial crystalline aluminium sulphate10.1007/BF02188861 ↗
67. Characterization of the structural and surface properties of chemically modified MCM-41 material10.1016/S1387-1811(00)00262-6 ↗
68. Hydrothermal stability of SBA-15 and related ordered mesoporous silicas with plugged pores10.1039/b603723b ↗
69. A comparison study on methane dry reforming with carbon dioxide over LaNiO3 perovskite catalysts supported on mesoporous SBA-15, MCM-41 and silica carrier10.1016/j.cattod.2012.07.022 ↗
70. Assessment of hydrophobic-hydrophilic properties of microporous materials from water adsorption isotherms10.1023/A:1026219813234 ↗
71. True microporosity and surface area of mesoporous SBA-15 silicas as a function of synthesis temperature10.1021/la0105477 ↗
72. Fine tuning of the interaction between Pluronic surfactants and silica walls in SBA-15 nanostructured materials10.1016/S1387-1811(01)00178-0 ↗
73. Adsorption of water vapor and hydrophobicity of ordered mesoporous silica, FSM-1610.1016/S1387-1811(98)00075-4 ↗
74. Water sorption on mesoporous aluminosilicate MCM-4110.1021/la00002a036 ↗
75. Effect of pore size on adsorbate condensation and hysteresis within a potential model adsorbent: M41S10.1016/0927-6513(94)00042-5 ↗
76. Water sorption on composite silica modified by calcium nitrate10.1016/j.micromeso.2009.02.034 ↗