Life cycle analysis of organic tandem solar cells: When are they warranted?
Source abstract
Abstract
Abstract One approach to use solar radiation more effectively in solar cells is to stack, in series, multiple photoactive layers with complementary absorption spectra. Such devices are often termed tandem or multi-junction solar cells. The larger number of different materials and processing steps involved in their making when compared with the single junction solar cell has to be justified and compensated by a higher efficiency. A central question to ask is how much energy you need to invest in a system in order for it to produce energy and return the investment at least once and preferably a number of times. As an initial investigation into the potential viability of the tandem or multi-junction approach we have engaged in a detailed analysis based on the manufacturing energy for each step within the tandem module supply chain for full ambient processing of thin flexible polymer tandem solar cells prepared entirely by roll processing methods. We present a comprehensive overview of relevant research results on how the energy consumption affects the energy balance when using single and multi-junction solar cells. Based on the above question we calculate the minimum efficiency that the tandem or multi-junction should present to determine the minimum energy payback time; that is whether (or when) the increase in materials use and complexity of the tandem architecture is compensated by better performance. After analysing the performance and the consideration of a series of technical improvement opportunities, we project that the tandem solar cell has to be ~20% higher performing than the corresponding single junction solar cell to be warranted. We also highlight that there is a range in the reciprocal EBPT–efficiency relationship where the tandem solar cell is an advantage. Specific to polymer and organic solar cells are however that they embody very little energy and this implies that the single junction may be an advantage, especially in cases where land mass is not critical.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · solar cell performance optimization · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The looming revolution: How photovoltaics will change electricity markets in Europe fundamentally10.1016/j.energy.2013.04.034 ↗
2. Analytical model for solar PV and CSP electricity costs: present LCOE values and their future evolution10.1016/j.rser.2012.11.082 ↗
3. Moss · 2011
4. E.A. Alsema, M.J. de Wild-Scholten, Environmental Impacts of Crystalline Silicon Photovoltaic Module production, Materials Research Society Fall 2005 Meeting, Boston, 2005.10.1557/PROC-0895-G03-04 ↗
5. Energy intensities, EROIs (energy returned on invested), and energy payback times of electricity generating power plants10.1016/j.energy.2013.01.029 ↗
6. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
7. Environmental and economic assessment of ITO-free electrodes for organic solar cells10.1016/j.solmat.2011.09.024 ↗
8. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
9. A model to determine financial indicators for organic solar cells10.1016/j.solener.2009.07.009 ↗
10. Estimating the manufacturing cost of purely organic solar cells10.1016/j.solener.2009.02.003 ↗
11. Economic assessment of solar electricity production from organic-based photovoltaic modules in a domestic environment10.1039/c1ee01766g ↗
12. A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions10.1016/j.solmat.2010.08.020 ↗
13. Fast inline roll-to-roll printing for indium–tin-oxide-free polymer solar cells using automatic registration10.1002/ente.201200029 ↗
14. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
15. OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools10.1039/c3ta01611k ↗
16. T.R. Andersen, H.F. Dam, B. Andreasen, M. Hösel, M.V. Madsen, S.A. Gevorgyan, et al., A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers, Solar Energy Materials and Solar Cells, this issue (2013), http://dx.doi.org/10.1016/j.solmat.2013.07.006.10.1016/j.solmat.2013.07.006 ↗
17. Cumulative energy demand for small molecule and polymer photovoltaics
18. Polymer fullerene bulk heterojunction solar cells10.1002/adma.200903697 ↗
19. Solution-processed organic tandem solar cells10.1002/adfm.200600138 ↗
20. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
21. Optimizing Polymer tandem solar cells10.1002/adma.200902398 ↗
22. Efficient Tandem and triple-junction polymer solar cells10.1021/ja401434x ↗
23. Highly efficient tandem polymer photovoltaic cells10.1002/adma.200901624 ↗
24. Interconnection layer for polymer tandem solar cells with an inverted architecture10.1002/adma.201001033 ↗
25. European Commission, International Reference Life Cycle Data System (ILCD) Handbook, General Guide for Life Cycle Assessment, detailed guidance, Joint Research Centre, Institute for Environment and Sustainability, Publications Office of the European Union, Luxembourg, 2010.
26. Swiss Centre for Life Cycle Inventories, 〈http://www.ecoinvent.org〉.
27. PlasticsEurope eco-profiles, LCA Process Inventories for Refining and Plastic Production Databases, 〈http://www.plasticseurope.org/plasticssustainability/eco-profiles.aspx〉.
28. Life cycle analysis of organic photovoltaic technologies10.1002/pip.967 ↗
29. Energy Use and Greenhouse Gas Emissions in the Life Cycle of CdTe Photovoltaics10.1557/PROC-0895-G03-06 ↗
30. M. Hösel, R.R. Søndergaard, M. Jørgensen, F.C. Krebs, Comparison of UV-curing, hotmelt and pressure sensitive adhesive as roll-to-roll encapsulation methods for polymer solar cells, Advanced Engineering Materials (2013), http://dx.doi.org/10.1002/adem.201300172.10.1002/adem.201300172 ↗
31. Life cycle greenhouse gas emissions of thin-film photovoltaic electricity generation10.1111/j.1530-9290.2011.00423.x ↗
32. Biodegradable polymer solar cells10.1016/j.solmat.2008.02.002 ↗
33. All printed transparent electrodes through an electrical switching mechanism: a convincing alternative to indium-tin-oxide, silver and vacuum10.1039/c2ee23244h ↗