Packaging III–V tandem solar cells for practical terrestrial applications achievable to 27% of module efficiency by conventional machine assemble technology
Source abstract
Abstract
Abstract A new concentrator receiver containing a 7 mm×7 mm 3J concentrator solar cell with a 37.4% peak efficiency was developed. The receiver design includes a homogenizer, heat-handling (epoxy lamination) technologies and a low-resistance soldered connection and can be applied to various concentrator optics, including dish systems. The outdoor efficiency with a combination of a plastic Fresnel lens, made by low-cost injection molding, reached 27% on a hot summer day under 35.0 °C ambient temperature without additional cooling. With this newly developed receiver, mechanical engineers will be able to design their own concentrator module suitable for their environment, using their mechanical knowledge and local industrial resources. A 400X and 7056 cm 2 concentrator module was fabricated with 36 concentrator receivers connected in series and the same number of newly developed dome-shaped, non-imaging Fresnel lenses. The power rating was 200 Wp. The peak outdoor efficiency on a clear sky day was 26.8±1.5%. The integrated efficiency over the course of the day was 25.3±1.4%. This is the highest module efficiency that has been achieved using a practical module size and electrical rating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Chalcogenide Semiconductor Thin Films · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Yamaguchi · IEEE Trans. Electron. Dev. · 1999 · 46 · 213910.1109/16.792009 ↗
2. O’Neill, et al., Development of terrestrial concentrator modules using high-efficiency multi-junction solar cells, in: 29th IEEE PVSC, New Orleans, (2002).
3. A.W. Bett, et al., FLATCONTM-MODULES: technology and characterization, in: Third WCPEC, 2003.
4. T. Takamoto, et al., Multi-junction solar cell technologies—high efficiency radiation tolerance, and concentrator applications, in: Third WCPEC, 2003.
5. K. Araki, et al., Development of a robust and high efficiency concentrator receiver, in: Third WCPEC, 2003.
6. K. Araki, et al., Achievement of 28% efficient and 200Wp concentrator module and the technological roadmap toward realization of more than 31% efficient modules, OR28VI/12-1.
7. K. Araki, et al., A simple passive cooling structure and its heat analysis for 500X concentrator PV module, in: 29th IEEE PVSC, 2002.
8. K. Araki, et al., Material study for the solar module under high concentration UV exposure, in: Third WCPEC, 2003.
9. R. Leutz, et al., Flux uniformity and spectral reproduction in solar concentrators using secondary optics, in: Proceedings ISES Solar World Congress, Adelaide, Australia, 2001.
10. K. Araki, et al., Development of a metal homogenizer for concentrator monolithic multi-junction solar cells, in: 29th IEEE PVSC, 2001.
11. M. Hiramatsu, et al., Development of non-imaging Fresnel lens and sun-tracking devices, in: Third WCPEC, 2003.