journal article·2020-11

Form-stable and light-to-thermal conversion properties of comb-like polymer composite phase change materials for thermal management application

Jing Li, Haixia Wang, Huiqin Mao, Lang Li, Jiangyue Shi, Haifeng Shi

Publisher page

Abstract

Abstract In this paper, composite phase change materials (cPCMs) were prepared by the impregnation method with poly(methyl vinyl ether-alt-maleic anhydride)-g-octadecanol (PM18) comb-like polymer as PCMs and reduced graphene oxide-carbon nanotubes hybrid aerogel (CG-x) that x (the mass ratio between CNT and GO) varies from 0.5 to 2 as supporting matrix. Thermal properties such as phase change enthalpy, thermal repeatability and shape stabilization of cPCMs were investigated by FTIR, DSC, and thermocouple. PM18@CG-x cPCMs exhibit an enhanced shape-stabilization behavior at 80 °C for 30 min and a 300% increased thermal conductivity is realized. PM18@CG-1 cPCMs demonstrate an excellent light-to-thermal conversion capacity and a good thermal energy storage and release ability, and its largest temperature appears at 75.4 °C under 100 mW/cm2 irradiation intensity. Furthermore, the light-to-thermal conversion capability of fabric controlled by the back-bonded PM18@CG-1 slice is investigated, and the influence of irradiation intensity on thermal energy buffering time is also discussed. Through controlling the number of PM18@CG-1 slices, the tailored thermal properties are further analyzed. This method provides a method to approach the shape-stabilized PCMs with good thermal management and photothermal conversion capability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (84)

Show source-provided references
1. City-integrated renewable energy for urban sustainability10.1126/science.aad9302 ↗
2. Catching the rainbow: light harvesting in dye-sensitized solar cells10.1002/anie.200704538 ↗
3. A review on the applications of nanofluids in solar energy systems10.1016/j.rser.2014.11.020 ↗
4. Seawater desalination using renewable energy sources10.1016/j.pecs.2005.03.001 ↗
5. Role of renewable energy sources in environmental protection: a review10.1016/j.rser.2010.11.037 ↗
6. Toward efficient photoelectrochemical water-splitting by using screw-like SnO2 nanostructures as photoanode after being decorated with CdS quantum dots10.1016/j.nanoen.2015.11.011 ↗
7. Efficient light-to-electrical energy conversion: nanocrystalline TiO2 films modified with inorganic sensitizers10.1021/ed074p652 ↗
8. Nanoconfinement of phase change materials within carbon aerogels: phase transition behaviours and photo-to-thermal energy storage10.1039/C4TA04605F ↗
9. Curbing global warming with phase change materials for energy storage10.1016/j.rser.2012.10.014 ↗
10. Thermal stability of phase change materials used in latent heat energy storage systems: a review10.1016/j.rser.2012.10.022 ↗
11. Review of passive PCM latent heat thermal energy storage systems towards buildings' energy efficiency10.1016/j.enbuild.2012.12.042 ↗
12. Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material10.1016/j.rser.2006.11.002 ↗
13. Advanced materials for energy storage10.1002/adma.200903328 ↗
14. Largely lowered transition temperature of a VO2/carbon hybrid phase change material with high thermal emissivity switching ability and near infrared regulations10.1002/admi.201801063 ↗
15. Tuneable thermal emission using chalcogenide metasurface10.1002/adom.201800169 ↗
16. Wideband absorbers in the visible with ultrathin plasmonic-phase change material nanogratings10.1021/acs.jpcc.6b01080 ↗
17. Carbon based material included-shaped stabilized phase change materials for sunlight-driven energy conversion and storage: an extensive review10.1016/j.solener.2018.05.007 ↗
18. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)10.1016/j.rser.2009.10.015 ↗
19. High temperature latent heat thermal energy storage: phase change materials, design considerations and performance enhancement techniques10.1016/j.rser.2013.07.028 ↗
20. Comb-like polymers
21. Frustrated crystallisation and hierarchical self-assembly behaviour of comb-like polymers10.1039/C2CS35350D ↗
22. Poly(polyethylene glycol methyl ether methacrylate) as novel solid‐solid phase change material for thermal energy storage10.1002/app.35287 ↗
23. Crystalline structure and phase behavior of N-alkylated polypyrrole comb-like polymers10.1039/C4CE00722K ↗
24. Shape-stabilized phase change materials based on poly(ethylene-graft-maleic anhydride)-g-alkyl alcohol comb-like polymers10.1016/j.solmat.2015.06.038 ↗
25. Poly(styrene-co-maleic anhydride)-graft-fatty acids as novel solid–solid PCMs for thermal energy storage10.1002/pen.25064 ↗
26. Synthesis and characterization of novel comb-type amphiphilic graft copolymers containing polypropylene and polyethylene glycol10.1007/s00289-009-0211-3 ↗
27. Thermal energy storage properties of polyethylene glycol grafted styrenic copolymer as novel solid-solid phase change materials
28. Thermal energy storage characteristics of poly(styrene-co-maleic anhydride)-graft-PEG as polymeric solid–solid phase change materials10.1016/j.solmat.2016.12.001 ↗
29. Thermal performance and shape-stabilization of comb-like polymeric phase change materials enhanced by octadecylamine-functionalized graphene oxide10.1016/j.enconman.2018.05.014 ↗
30. Phase transition and side-chain crystallization of poly(methyl vinyl ether-alt-maleic anhydride)-g-Alkyl alcohol comb-like polymers10.1021/acs.macromol.8b01856 ↗
31. Photo- and electro-responsive phase change materials based on highly anisotropic microcrystalline cellulose/graphene nanoplatelet structure10.1016/j.apenergy.2018.11.091 ↗
32. Electro- and photodriven phase change composites based on wax-infiltrated carbon nanotube sponges10.1021/nn304310n ↗
33. Hybrid graphene aerogels/phase change material composites: thermal conductivity, shape-stabilization and light-to-thermal energy storage10.1016/j.carbon.2016.01.063 ↗
34. Graphene/phase change material nanocomposites: light-driven, reversible electrical resistivity regulation via form-stable phase transitions10.1021/am507700r ↗
35. Thermal properties of beeswax/graphene phase change material as energy storage for building applications10.1016/j.applthermaleng.2016.10.085 ↗
36. Preparation of nitrogen-doped graphene/palmitic acid shape stabilized composite phase change material with remarkable thermal properties for thermal energy storage10.1016/j.apenergy.2014.08.100 ↗
37. Molecular dynamics simulation on thermophysics of paraffin/EVA/graphene nanocomposites as phase change materials10.1016/j.applthermaleng.2019.114639 ↗
38. Synthesis and light-heat conversion performance of hybrid particles decorated MWCNTs/paraffin phase change materials10.1016/j.tca.2017.03.003 ↗
39. Single-walled carbon nanotube for shape stabilization and enhanced phase change heat transfer of polyethylene glycol phase change material10.1016/j.enconman.2017.03.065 ↗
40. Experimental study of thermo-physical properties and application of paraffin-carbon nanotubes composite phase change materials10.1016/j.ijheatmasstransfer.2019.06.008 ↗
41. Carbon nanotube bundles assembled flexible hierarchical framework based phase change material composites for thermal energy harvesting and thermotherapy10.1016/j.ensm.2019.12.029 ↗
42. Characterization and effects of thermal cycling on the properties of paraffin/expanded graphite composites10.1016/j.renene.2019.09.091 ↗
43. A phase change microactuator based on paraffin wax/expanded graphite/nickel particle composite with induction heating10.1016/j.sna.2018.04.006 ↗
44. Preparation and characterization of polyethylene glycol/active carbon composites as shape-stabilized phase change materials10.1016/j.solmat.2010.09.033 ↗
45. Preparation and thermal properties of n–octadecane/stearic acid eutectic mixtures with hexagonal boron nitride as phase change materials for thermal energy storage10.1016/j.enbuild.2016.09.022 ↗
46. Boron nitride foam as a polymer alternative in packaging phase change materials: synthesis, thermal properties and shape stability10.1016/j.apenergy.2019.01.153 ↗
47. High thermal conductive shape-stabilized phase change materials of polyethylene glycol/boron nitride@chitosan composites for thermal energy storage10.1016/j.compositesa.2019.105710 ↗
48. Preparation of capric acid/halloysite nanotube composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.05.024 ↗
49. Synthesis and properties of crosslinking halloysite nanotubes/polyurethane-based solid-solid phase change materials10.1016/j.solmat.2017.08.031 ↗
50. Effect of halloysite nanotubes on shape stabilities of polyethylene glycol-based composite phase change materials10.1016/j.ijheatmasstransfer.2018.11.160 ↗
51. Shape-stabilized phase change material/nylon composite based on recycled diatomite10.1016/j.matchemphys.2019.122498 ↗
52. Polyethylene glycol (PEG)/diatomite composite as a novel form-stable phase change material for thermal energy storage10.1016/j.solmat.2011.01.022 ↗
53. Diatomite: a promising natural candidate as carrier material for low, middle and high temperature phase change material10.1016/j.enconman.2015.03.071 ↗
54. Effect of graphene oxide nanoplatelets on the thermal characteristics and shape-stabilized performance of poly(styrene-co-maleic anhydride)-g-octadecanol comb-like polymeric phase change materials10.1016/j.solmat.2016.01.001 ↗
55. Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability10.1016/j.solmat.2017.08.025 ↗
56. Light-heat conversion and thermal conductivity enhancement of PEG/SiO2 composite PCM by in situ Ti4O7 doping10.1016/j.solmat.2016.12.003 ↗
57. Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide10.1016/j.enconman.2017.05.037 ↗
58. Graphene oxide aerogel beads filled with phase change material for latent heat storage and release10.1021/acsaem.9b00374 ↗
59. Synthesis of novel form-stable composite phase change materials with modified graphene aerogel for solar energy conversion and storage10.1016/j.solmat.2018.11.025 ↗
60. Graphene aerogels enhanced phase change materials prepared by one-pot method with high thermal conductivity and large latent energy storage10.1016/j.solmat.2018.06.005 ↗
61. A phase change material encapsulated in a mechanically strong graphene aerogel with high thermal conductivity and excellent shape stability10.1016/j.compscitech.2020.108010 ↗
62. Development of graphitic domains in carbon foams for high efficient electro/photo-to-thermal energy conversion phase change composites10.1016/j.cej.2019.01.032 ↗
63. Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials10.1016/j.ensm.2017.12.028 ↗
64. Multiresponsive graphene-aerogel-directed phase-change smart fibers10.1002/adma.201801754 ↗
65. Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices10.1021/acsami.9b06198 ↗
66. Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability10.1016/j.cej.2019.122373 ↗
67. Polyurethane-based solid-solid phase change materials with halloysite nanotubes-hybrid graphene aerogels for efficient light- and electro-thermal conversion and storage10.1016/j.carbon.2018.10.083 ↗
68. Air-dried, high-density graphene hybrid aerogels for phase change composites with exceptional thermal conductivity and shape stability10.1039/C6TA07869A ↗
69. Highly anisotropic graphene/boron nitride hybrid aerogels with long-range ordered architecture and moderate density for highly thermally conductive composites10.1016/j.carbon.2017.10.011 ↗
70. Metal organic framework-derived three-dimensional graphene-supported nitrogen-doped carbon nanotube spheres for electromagnetic wave absorption with ultralow filler mass loading10.1016/j.carbon.2019.08.074 ↗
71. Amelioration of the pool boiling heat transfer performance via self-assembling of 3D porous graphene/carbon nanotube hybrid film over the heating surface10.1016/j.ijheatmasstransfer.2019.118732 ↗
72. Thermal properties and shape stabilization of epoxidized methoxy polyethylene glycol composite PCMs tailored by polydopamine-functionalized graphene oxide10.1016/j.solmat.2019.110388 ↗
73. Multiresponsive graphene-aerogel-directed phase-change smart fibers10.1002/adma.201801754 ↗
74. Enhanced thermal conductivity of polyurethane/wood powder composite phase change materials via incorporating low loading of graphene oxide nanosheets for solar thermal energy storage10.1016/j.solmat.2019.110391 ↗
75. Thermal transfer, interfacial, and mechanical properties of carbon fiber/polycarbonate-CNT composites using infrared thermography10.1016/j.polymertesting.2019.106247 ↗
76. Improving the heat transfer capability and thermal stability of vehicle engine oils using Al2O3/TiO2 nanomaterials10.1016/j.powtec.2019.12.051 ↗
77. Single-Walled carbon nanotube/phase change material composites: sunlight-driven, reversible, form-stable phase transitions for solar thermal energy storage10.1002/adfm.201203728 ↗
78. Light-to-thermal conversion and thermoregulated capability of coaxial fibers with a combined influence from comb-like polymeric phase change material and carbon nanotube10.1021/acsami.9b02387 ↗
79. Stearic-acid/carbon-nanotube composites with tailored shape-stabilized phase transitions and light–heat conversion for thermal energy storage10.1016/j.enconman.2015.04.002 ↗
80. Reduced graphene oxide dispersed nanofluids with improved photo-thermal conversion performance for direct absorption solar collectors10.1016/j.solmat.2017.01.024 ↗
81. Enhanced thermal conductivity in a nanostructured phase change composite due to low concentration graphene additives10.1021/jp200838s ↗
82. New approaches to improving thermal regulating property of cellulosic fabric10.1016/j.carbpol.2013.10.006 ↗
83. Development of thermo-regulating polypropylene fibre containing microencapsulated phase change materials10.1016/j.renene.2014.05.063 ↗
84. Facile synthesis of highly photoactive ATO-based microcapsule for solar energy harvesting10.1166/sam.2013.1611 ↗