journal article·2020-03

NiCr–MgF2 spectrally selective solar absorber with ultra-high solar absorptance and low thermal emittance

Yuping Ning, Jian Wang, Chunhui Ou, Changzheng Sun, Zhibiao Hao, Bing Xiong, Lai Wang, Yanjun Han, Hongtao Li, Yi Luo

Publisher page

Abstract

Abstract NiCr–MgF2 spectrally selective solar absorber, which consists of the tandem films of Au, high-metal-volume-fraction (HMVF) NiCr–MgF2, low-metal-volume-fraction (LMVF) NiCr–MgF2 and MgF2, is designed and fabricated for ultra-high solar absorptance and low thermal emittance. The performance of Au/NiCr–MgF2 (HMVF)/NiCr–MgF2 (LMVF)/MgF2 is simulated using the effective medium theory and film matrix method, and the optimized NiCr–MgF2 spectrally selective solar absorber has a normal solar absorptance (αsn) of 0.981 and a normal thermal emittance (en) of 0.042 at 25 °C. The tandem films of Au/NiCr–MgF2 (HMVF)/NiCr–MgF2(LMVF)/MgF2 are fabricated by magnetron sputtering and measured by UV-VIS-IR spectrometer, and it has an ultra-high near normal solar absorptance of αsn = 0.976 and a low near normal thermal emittance of en = 0.045 at 25 °C, which approaches very closely to the simulated limit. Furthermore, NiCr–MgF2 spectrally selective solar absorber allows a wide incident angle (θ) with its angular solar absorptance αs(θ)≥0.957 and angular thermal emittance e(θ)≤0.054 if θ ≤ 50°. Such spectrally selective solar absorber is an outstanding candidate for solar thermal applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Thermal Radiation and Cooling Technologies · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A review of cermet-based spectrally selective solar absorbers10.1039/c3ee43825b ↗
2. Optical parameters of a novel competitive selective absorber for low temperature solar thermal applications10.1016/j.solmat.2018.01.031 ↗
3. Structure, thermal stability and optical simulation of ZrB2 based spectrally selective solar absorber coatings10.1016/j.solmat.2018.12.040 ↗
4. SiC-TiC nanocomposite for bulk solar absorbers applications: effect of density and surface roughness on the optical properties10.1016/j.solmat.2018.11.018 ↗
5. Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3-Based nanostructured multilayer absorber coating through graded optical constants10.1016/j.solmat.2017.11.013 ↗
6. Design of high-temperature solar-selective coatings based on aluminium titanium oxynitrides AlyTi1-y(OxN1-x). Part 1: advanced microstructural characterization and optical simulation10.1016/j.solmat.2017.10.015 ↗
7. A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability10.1039/C5EE02066B ↗
8. Highly corrosion resistant and sandwich-like Si3N4/Cr-CrNx/Si3N4 coatings used for solar selective absorbing applications10.1021/acsami.6b11607 ↗
9. Review of physical vapor deposited (PVD) spectrally selective coatings for mid-and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
10. High-performance flat-panel solar thermoelectric generators with high thermal concentration10.1038/nmat3013 ↗
11. A novel high-performance photovoltaic–thermoelectric hybrid device10.1039/c1ee01646f ↗
12. Enhanced thermal stability of W-Ni-Al2O3 cermet-based spectrally selective solar absorbers with tungsten infrared reflectors10.1002/aenm.201401042 ↗
13. Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications10.1016/j.solmat.2018.09.033 ↗
14. High performance aperiodic metal-dielectric multilayer stacks for solar energy thermal conversion10.1016/j.solmat.2018.12.006 ↗
15. Multi-layer solar selective absorber coatings based on W/WSiAlNx/WSiAlOyNx/SiAlOx for high temperature applications10.1016/j.solmat.2018.07.001 ↗
16. Design and characterization of solar absorbing multilayer stack based on Al/Cr-N-O/SiO2 layers10.1016/j.solmat.2018.06.013 ↗
17. Effects of substrates, film thickness and temperature on thermal emittance of Mo/substrate deposited by magnetron sputtering10.1016/j.vacuum.2016.03.008 ↗
18. Investigation on low thermal emittance of Al films deposited by magnetron sputtering10.1016/j.infrared.2016.01.007 ↗
19. Chemically vapor-deposited ZrB2 as a selective solar absorber10.1016/0040-6090(81)90646-5 ↗
20. Chemical vapor deposition of thin semiconductor films for solar energy conversion10.1016/0040-6090(76)90626-X ↗
21. Kennedy · 2002
22. Simulation of two-dimensional Mo photonic crystal surface for high-temperature solar-selective absorber10.1002/pssa.200925573 ↗
23. High efficiency Al-N cermet solar coatings with double cermet layer film structures10.1088/0022-3727/32/15/324 ↗
24. Optimization of solar absorbing three-layer coatings10.1016/j.solmat.2005.03.009 ↗
25. Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO2 solar selective absorbing coating10.1016/j.solmat.2017.04.017 ↗
26. Metallic nanostructures for light trapping in energy-harvesting devices, Light:
27. Zhao · 2007 · 1651
28. Graded selective coatings based on chromium and titanium oxynitride10.1016/S0040-6090(03)00967-2 ↗
29. Stability of W-Al2O3 cermet based solar coating for receiver tube operating at high temperature10.1016/j.solmat.2010.04.080 ↗
30. High performance W–AlN cermet solar coatings designed by modelling calculations and deposited by DC magnetron sputtering10.1016/j.solmat.2003.08.021 ↗
31. Tuning of reflectance transition position of Al-AlN cermet solar selective absorbing coating by simulating10.1016/j.infrared.2016.11.012 ↗
32. Angular solar absorptance and thermal stability of Mo-SiO2 double cermet solar selective absorber coating10.1016/j.solener.2015.02.013 ↗
33. Optical property and thermal stability of Mo/Mo–SiO2/SiO2 solar-selective coating prepared by magnetron sputtering10.1002/pssa.201026301 ↗
34. Zr–ZrO2 cermet solar coatings designed by modelling calculations and deposited by dc magnetron sputtering10.1088/0022-3727/36/6/315 ↗
35. New cermet film structures with much improved selectivity for solar thermal applications10.1063/1.106602 ↗
36. Refraction index measurements on AlN single crystals10.1002/pssb.19660140127 ↗
37. Selective black absorbers using rf-sputtered Cr2O3/Cr cermet films10.1063/1.89234 ↗
38. Refractive index of cubic zirconia stabilized with yttria10.1364/AO.21.002978 ↗
39. Pulsed laser deposited alumina thin films10.1016/j.ceramint.2015.09.048 ↗
40. Refractive index determination of SiO2 layer in the UV/Vis/NIRJ. Eur. Optical Soc. Rapid Publ. range: spectrophotometric reverse engineering on single and bi-layer designs10.2971/jeos.2013.13010 ↗
41. Refractive index of alkaline earth halides and its wavelength and temperature derivatives10.1063/1.555616 ↗
42. Optical simulation, corrosion behavior and long term thermal stability of TiC-based spectrally selective solar absorbers10.1016/j.solmat.2017.04.015 ↗
43. Computational design for a wide-angle cermet-based solar selective absorber for high temperature applications10.1016/j.jqsrt.2013.03.004 ↗
44. Enhanced optical properties of TiN-based spectrally selective solar absorbers deposited at a high substrate temperature10.1016/j.solmat.2017.01.023 ↗
45. Optical properties of Au, Ni, and Pb at submillimeter wavelengths10.1364/AO.26.000744 ↗
46. Optical properties of metallic films for vertical-cavity optoelectronic devices10.1364/AO.37.005271 ↗
47. Carbon nanotube‐based tandem absorber with tunable spectral selectivity: transition from near‐perfect blackbody absorber to solar selective absorber10.1002/adma.201305070 ↗
48. Optical studies of germanium implanted with high dose oxygen10.1063/1.346135 ↗
49. TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications10.1063/1.2387897 ↗
50. Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: a critical review10.1016/j.rser.2017.05.062 ↗
51. AlMoN based spectrally selective coating with improved thermal stability for high temperature solar thermal applications10.1016/j.solener.2015.06.047 ↗
52. Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating10.1016/j.applthermaleng.2016.04.069 ↗
53. Nanometer thick tunable AlHfN coating for solar thermal applications: transition from absorber to antireflection coating10.1016/j.solmat.2015.02.008 ↗
54. Role of component layers in designing carbon nanotubes-based tandem absorber on metal substrates for solar thermal applications10.1016/j.solmat.2016.06.051 ↗