journal article·2019-06

Performance of novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar power plants (Part II)

Yifeng Jiang, Yanping Sun, Sean Li

Publisher page

Abstract

Abstract The performance of the eutectic Na2SO4-NaCl-α-alumina and-mullite composites (melting point of 626.0 °C) with different salt to ceramic ratios (45:55, 50:50, 55:45, 60:40, wt%) was investigated to evaluate their potential application as novel high temperature (> 600 °C) phase change materials for solar thermal energy storage. The results show that the thermal stability of these composites decreases with increased salt content. The eutectic Na2SO4-NaCl-α-alumina and- mullite (45:55, wt%) composites show better thermal performance than the composites with other mass ratios after 20 thermal heating-freezing cycles at the temperature range of 550–680 °C in air. 300 thermal cycle tests were therefore carried out with each of these two composites to evaluate their longer-term thermal stability. The results show that the cycled Na2SO4-NaCl/α-alumina (45:55, wt%) composite has a weight loss of 4.6% and its heat of fusion decreases from 117.8 J/g to 105.3 J/g while the cycled Na2SO4-NaCl/mullite (45:55, wt%) composite has a weight loss of 6.9% and its heat of fusion decreases from 117.6 J/g to 98.6 J/g. XRD and SEM-EDS analysis confirm that the eutectic Na2SO4-NaCl salt has good chemical compatibility with α-alumina and mullite ceramic materials, where no chemical reaction and phase separation occurs in the two composites during the 300 thermal cycling test. Addition of α-alumina and mullite (55 wt%) to the eutectic Na2SO4-NaCl salt can improve its thermal conductivity by more than 3 times with α-alumina having a better enhancement than mullite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Supercritical CO2 Brayton cycles for solar-thermal energy10.1016/j.apenergy.2013.06.020 ↗
2. Advanced thermal energy storage technology for parabolic trough10.1115/1.1687404 ↗
3. Macro-encapsulation of emtallic phase chnage material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
4. Considerations for the use of metal alloys as phase change materials for high temperature applications10.1016/j.solmat.2017.06.054 ↗
5. W.M. Phillips, J.W. Stearns, Advanced latent heat of fusion thermal energy storage for solar power systems, in: 20th Intersociety Energy Conversion Engineering Conference, Volume 2, 1985, pp. 2.384-382.391.
6. High-temperature phase change materials for thermal energy storage10.1016/j.rser.2009.11.011 ↗
7. L. Marianowski, H. Maru, Latent heat thermal energy storage systems above 450 °C, in: 12th Intersociety Energy Conversion Engineering Conference, 1977, pp. 555–566.
8. Three-component system Na/F, Cl, Br. Izvestiya VUZov. Severo-Kavkazskii region
9. Thermal stability of Na2CO3-Li2CO3 as a high temperature phase change material for thermal energy storage10.1016/j.tca.2017.01.002 ↗
10. Thermal energy storage using chloride salts and their eutectics10.1016/j.applthermaleng.2016.07.046 ↗
11. Impregnation of porous mullite with Na2SO4 phase change material for thermal energy storage10.1016/j.solmat.2014.12.012 ↗
12. Multi-walled carbon nanotubes added to Na2CO3/MgO composites for thermal energy storage10.1016/j.partic.2013.05.001 ↗
13. Novel Na2SO4-NaCl-ceramic composites as high temperature phase change materials for solar thermal power plants (Part I)10.1016/j.solmat.2017.12.034 ↗
14. High-temperature alloy/honeycomb ceramic composite materials for solar thermal storage applications: preparation and stability evaluation10.1016/j.ceramint.2016.12.119 ↗
15. Preparation and characterization of sodium sulfate/silica composite as a shape-stabilized phase change material by sol-gel method10.1016/S1004-9541(14)60047-1 ↗
16. Recommended values for the thermal conductivity of molten salts between the melting and boiling points10.1016/j.solmat.2014.03.028 ↗
17. A rough hard-sphere model for the thermal conductivity of molten salts10.1007/BF00503912 ↗
18. D.R. Askeland, P.P. Fulay, The Science and Engineering of Materials. CHAPTER 22: Thermal properties of Materials, 2005, 798.
19. Elementary mechanisms of liquid-phase sintering. 1. Rearrangement
20. Carbonate-salt-based composite materials for medium- and high-temperature thermal energy storage10.1016/j.partic.2013.09.002 ↗
21. Composite materials for thermal energy storage: enhancing performance through microstructures10.1002/cssc.201300878 ↗