journal article·2017-04

The impact of reducing the thickness of electrodeposited stacked Cu/In/Ga layers on the performance of CIGS solar cells

A. Duchatelet, E. Letty, S. Jaime-Ferrer, P.-P. Grand, F. Mollica, N. Naghavi

Publisher page

Abstract

Abstract In this work, Cu(In,Ga)Se2 (CIGS) absorbers with thicknesses ranging from 2 µm to 370 nm were prepared by a two-step process using electrodeposition of Cu-In-Ga followed by annealing under a pure Se atmosphere. Based on compositional characterizations, it is shown that in order to decrease the thickness of the precursors, it is not enough to reduce only the deposition time of Cu-In-Ga layers without working on the composition and deposition parameters of the thin films. After the optimization of annealing conditions, the properties of the absorbers and solar cells with three different thicknesses (2 µm, 0.7 µm and 0.37 µm) were compared. It is shown that, in spite of the decreasing thickness, hence a decrease in JSC, the VOC of ultrathin CIGS electrodeposited solar cells can be improved due to an increase in the Ga content of the electrodeposited absorbers. Without deliberate light trapping and anti-reflecting coating from the very thin absorber layer of 0.37 µm, an efficiency of 8.7% with VOC of 685 mV, JSC of 19 mA/cm2 and FF of 67%, was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Effects of heavy alkali elements in Cu (In, Ga) Se2 solar cells with efficiencies up to 22.6%10.1002/pssr.201600199 ↗
2. Trina Solar Announces New Efficiency Record of 21.25% Efficiency for Multi-crystalline Silicon Solar Cell, (n.d.). 〈http://www.trinasolar.com/us/about-us/newinfo_978.html〉 (accessed 17.12.15)
3. Sustainability of photovoltaics: the case for thin-film solar cells10.1016/j.rser.2009.05.001 ↗
4. Enhanced performance of ultra-thin Cu (In, Ga) Se 2 solar cells deposited at low process temperature10.1016/j.solmat.2014.08.045 ↗
5. Employing Si solar cell technology to increase efficiency of ultra-thin Cu (In, Ga) Se2 solar cells10.1002/pip.2527 ↗
6. Effect of Reduced Cu(InGa)(SeS) Thickness Using Three-Step H Se/Ar/H S Reaction of Cu–In–Ga Metal Precursor
7. The Influence of absorber thickness on Cu (In, Ga) Se solar cells With different buffer layers10.1109/JPHOTOV.2013.2276030 ↗
8. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
9. Enhanced back reflectance and quantum efficiency in Cu(In,Ga)Se2 thin film solar cells with a ZrN back reflector10.1063/1.1794860 ↗
10. News - 23 October 2014, - NEXCIS achieves a new record performance @17.3% certified pixel measurement with its CIGS PV technology, (n.d.). 〈http://www.nexcis.fr/en/medias/theme-3-news〉 (accessed 10.02.15).
11. The influence of gallium on phase transitions during the crystallisation of thin film absorber materials Cu(In,Ga)(S,Se)2 investigated by in-situ X-ray diffraction10.1016/j.tsf.2010.12.138 ↗
12. In situ investigation of the formation of Cu(In,Ga)Se2 from selenised metallic precursors by X-ray diffraction–the impact of gallium, sodium and selenium excess10.1016/j.jpcs.2005.09.025 ↗
13. Bandgap optimization of submicron-thick Cu(In,Ga)Se2 solar cells10.1002/pip.2543 ↗
14. Time-resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors10.1002/pip.2531 ↗
15. Band-gap grading in Cu (In, Ga) Se 2 solar cells10.1016/j.jpcs.2005.09.087 ↗
16. Potential of submicrometer thickness Cu (In, Ga) Se2 solar cells10.1063/1.2128054 ↗