CIGS solar cells on ultra-thin glass substrates: Determination of mechanical properties by nanoindentation and application to bending-induced strain calculation
Source abstract
Abstract
Abstract Cu(In, Ga)Se2 (CIGS) based thin film solar cells have been extensively studied and today, power conversion efficiencies higher than 20% have been demonstrated on both rigid and flexible substrates. However, very little is known about the mechanical resistance of flexible CIGS solar cells under flexion. Here we report an original study on the mechanical properties of CIGS solar cells fabricated on 100 µm-thick ultra-thin glass substrates. The Young's modulus and hardness of Mo and CIGS thin films are measured by nanoindentation, a technique well adapted to the characterization of thin film materials. Young's modulus values of 289 GPa and 70 GPa are obtained for the Mo and the CIGS layers respectively, as well as a CIGS hardness of 3.4 GPa. These values, combined with an analytical model, allow calculating the strain induced in thin film during the flexion of solar cells fabricated on ultra-thin glass substrate as well as on polyimide substrate. Thereby, we show that using a substrate with a low thickness and a low Young's modulus enables to lower the thin films strain during the flexion of cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Solar cell efficiency tables (version 47)10.1002/pip.2728 ↗
2. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells
3. Cd-Free Flexible Cu(In,Ga)Se2 thin film solar cells with ZnS(O,OH) buffer layers on Ti foils10.1143/APEX.2.072201 ↗
4. Sodium-doped Mo back contacts for Cu(In,Ga)Se2 solar cells on Ti foils: growth, morphology, and sodium diffusion10.1063/1.4866787 ↗
5. Development of high-efficiency flexible Cu(In,Ga)Se2 solar cells: a study of alkali doping effects on CIS, CIGS, and CGS using alkali-silicate glass thin layers10.1016/j.cap.2009.11.024 ↗
6. CIGS solar cells on flexible ultra-thin glass substrates: characterization and bending test10.1016/j.tsf.2015.09.006 ↗
7. High Performance Thin Film Solar Cells on Plastic Substrates with Nanostructure-Enhanced Flexibility10.1016/j.nanoen.2016.02.042 ↗
8. Highly efficient flexible perovskite solar cells with antireflection and self-cleaning nanostructures10.1021/acsnano.5b04284 ↗
9. Fatigue resistance of a flexible, efficient, and metal oxide-free perovskite solar cell10.1039/C5TA00084J ↗
10. Tensile stress-dependent fracture behavior and its influences on photovoltaic characteristics in flexible PbS/CdS thin-film solar cells10.1021/am507301c ↗
11. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
12. Mechanics of rollable and foldable film-on-foil electronics10.1063/1.123478 ↗
13. Logothetidis · 2014
14. Davis · 1998
15. Microstructural mechanical properties and yield point effects in Mo alloys10.1016/S0921-5093(01)01086-3 ↗
16. Thin-film elastic-property measurements with laser-ultrasonic SAW spectrometry10.1016/S0040-6090(01)01338-4 ↗
17. Residual stress in CIGS thin film solar cells on polyimide: simulation and experiments10.1007/s10854-013-1610-7 ↗
18. Strength, stiffness, and microstructure of Cu(In,Ga)Se2 thin films deposited via sputtering and co-evaporation10.1063/1.4890086 ↗
19. Nanoindentation characterization of ZnO thin films10.1016/j.msea.2006.11.008 ↗
20. Preparation and mechanical properties of aluminum-doped zinc oxide transparent conducting films10.1016/j.surfcoat.2008.06.024 ↗
21. Performance of Cu(In,Ga)Se2 solar cells using nominally alkali free glass substrates with varying coefficient of thermal expansion
22. Incorporation of alkali metals in chalcogenide solar cells10.1016/j.solmat.2015.06.011 ↗
23. Nanoindentation and contact stiffness measurement using force modulation with a capacitive load-displacement transducer10.1063/1.1149769 ↗
24. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
25. Nanoindentation with a surface force apparatus
26. Determination of elastoplastic properties by instrumented sharp indentation10.1016/S1359-6462(99)00011-1 ↗
27. Fischer-Cripps · 2011
28. B.S. Bec, A. Tonck, Improvements in the indentation method with a surface force apparatus, 74, 1996, pp. 1061–107210.1080/01418619608239707 ↗
29. A simple method to minimize displacement measurement uncertainties using dynamic nanoindentation testing10.1016/j.triboint.2013.10.013 ↗
30. G.M. Pharr, Measurement of mechanical properties by ultra-low load indentation, 253, 1998, pp. 151–15910.1016/S0921-5093(98)00724-2 ↗