journal article·2017-01

Three-step vapor Se/N2/vapor Se reaction of electrodeposited Cu/In/Ga precursor for preparing CuInGaSe2 thin films

Jinlian Bi, Jianping Ao, Ming-Jer Jeng, Liyong Yao, Shoushuai Gao, Guozhong Sun, Qing He, Zhiqiang Zhou, Yun Sun, Yu-Ling Xiao, Liann-Be Chang

Publisher page

Abstract

The three-step H2Se/Ar/H2Se reaction of CuInGa precursors for preparing high-quality CuInGaSe2 thin films is extensively used to control their composition and adhesion. In this work, a non-toxic, low-cost, solid Se source is used instead of toxic H2Se gas to selenize electrodeposited Cu/In/Ga precursors by the three-step vapor Se/N2/vapor Se reaction. Experimental results reveal that the Se content of the film in the first selenization step importantly affects the Ga distribution. Incomplete selenization (0.74<Se/Metal<0.96) in the first selenization step favors subsequent Ga diffusion. The second annealing step in inert gas atmosphere generates significant grain growth with Ga re-diffusion and does not change the composition in comparison with the first step treatment. The third selenization step in Se vapor atmosphere does not cause a significant additional change in the Ga distribution or microstructure of the film, but it causes Ga depletion at the top surface. Finally, CIGS solar cells on stainless steel substrate were fabricated using the three-step reaction and devices with efficiency=8.23% and VOC=434 mV were produced by a preliminary process parameter optimization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Solar Frontier hits 22.3% on CIGS Cell, Solar Frontier Press Release, 2015. [online]. Available: 〈http://www.solar-frontier.com/eng/news/2015/C051171.html〉.
2. Gallium gradients in Cu(In, Ga)Se2 thin-film solar cells10.1002/pip.2485 ↗
3. Composition and bandgap control in Cu(In,Ga)Se2-based absorbers formed by reaction of metal precursors
4. Time-resolved investigation of Cu(In, Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors10.1002/pip.2531 ↗
5. C.L. Jensen, D.E. Tarrant, J.H. Ermer, G.A. Pollock, The role of gallium in CuInSe2 solar cells fabricated by a two-stage method, in: Proceedings of the 23th IEEE Photovoltaic Specialists Conference, 1993, pp. 577–580.10.1109/PVSC.1993.347030 ↗
6. Phases, morphology, and diffusion in CuInxGa1− xSe2 thin films10.1063/1.366122 ↗
7. K. Woo Kyoung, G.M. Hanket, W.N. Shafarman, Ga distribution and adhesion issues in selenization of metallic Cu-Ga-In precursors, in: Proceedings of the 34th IEEE Photovoltaic Specialists Conference (PVSC), 2009, pp. 000844–000847.10.1109/PVSC.2009.5411155 ↗
8. The electronic structure of chalcopyrites-bands, point defects and grain boundaries10.1002/pip.936 ↗
9. Grain boundaries in Cu(In,Ga)(Se,S)2 thin-film solar cells10.1007/s00339-008-4978-0 ↗
10. Three-step H2Se/Ar/H2S reaction of Cu-In-Ga precursors for controlled composition and adhesion of Cu (In, Ga)(Se, S)2 thin films10.1063/1.4704390 ↗
11. Incongruent reaction of Cu(InGa) intermetallic precursors in H2Se andH2S10.1063/1.2787151 ↗
12. Formation mechanisms of Cu(In,Ga)Se2 solar cells prepared from electrodeposited precursors10.1016/j.tsf.2012.11.106 ↗
13. C.H. Chang, Processing and characterization of copper indium selenide for photovoltaic applications (Dissertation), University of Florida, 1999.
14. Reaction kinetics of CuGaSe2 formation from a GaSe/CuSe bilayer precursor film10.1016/j.jcrysgro.2008.01.034 ↗
15. Kinetics of the reactive crystallization of CuInSe2 and CuGaSe2 chalcopyrite films for solar cell applications10.1016/j.jcrysgro.2005.11.054 ↗
16. Electrodeposition of copper: the nucleation mechanisms10.1016/S0013-4686(02)00161-5 ↗
17. Electrodeposition of indium onto Mo/Cu for the deposition of Cu(In, Ga)Se2 thin films10.1016/j.electacta.2007.11.069 ↗
18. Characterization of Cu(In, Ga)Se2 films by Raman scattering10.1016/S0254-0584(01)00345-5 ↗
19. Raman investigations of Cu(In, Ga)Se2 thin films with various copper contents10.1016/j.tsf.2008.07.011 ↗
20. Raman spectroscopy of CuIn1−xGaxSe2 for in-situ monitoring of the composition ratio10.1016/j.tsf.2011.02.058 ↗
21. Lattice vibrations of CuInSe2and CuGaSe2 by Raman microspectrometry10.1063/1.352195 ↗
22. Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition10.1016/j.jpowsour.2014.09.036 ↗
23. Influence of iron on the performance of CIGS thin-film solar cells10.1016/j.solmat.2014.06.038 ↗
24. Influence of iron on defect concentrations and device performance for Cu(In, Ga)Se2 solar cells on stainless steel substrates10.1002/pip.2260 ↗
25. Effect of sodium addition on Cu-deficient CuIn1−xGaxS2 thin film solar cells10.1016/j.solmat.2008.04.013 ↗
26. Na-induced efficiency boost for Se-deficient Cu(In,Ga)Se2 solar cells10.1002/pip.2600 ↗
27. In situ investigation of the formation of Cu (In, Ga)Se2 from selenised metallic precursors by X-ray diffraction – the impact of Gallium, Sodium and Selenium excess10.1016/j.jpcs.2005.09.025 ↗
28. Lange · 1999
29. Reaction kinetics of CuGaSe2 formation from a GaSe/CuSe bilayer precursor film10.1016/j.jcrysgro.2008.01.034 ↗
30. Thermodynamic Properties of In2Se10.1016/S0021-9614(73)80083-7 ↗