Tuning of PCDTBT:PC71BM blend nanoparticles for eco-friendly processing of polymer solar cells
Source abstract
Abstract
We report the controlled preparation of water processable nanoparticles (NPs) employing the push-pull polymer PCDTBT and the fullerene acceptor PC71BM in order to enable solar cell processing using eco-friendly solvent (i.e. water). The presented method provides the possibility to separate the formation of the active layer blend and the deposition of the active layer into two different processes. For the first time, the benefits of aqueous processability for the high-potential class of push-pull polymers, generally requiring high boiling solvents, are made accessible. With our method we demonstrate excellent control over the blend stoichiometry and efficient mixing. Furthermore, we provide visualization of the nanomorphology of the different NPs to obtain structural information down to ~2 nm resolution using advanced analytical electron microscopy. The imaging directly reveals very small compositional demixing in the PCDTBT:PC71BM blend NPs, in the size range of about <5 nm, indicating fine mixing at the molecular level. The suitability of the proposed methodology and materials towards the aspects of eco-friendly processing of organic solar cells is demonstrated through a processing of lab scale NPs solar cell prototypes reaching a power conversion efficiency of 1.9%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. The future of organic photovoltaics10.1039/C4CS00227J ↗
2. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
3. High efficiency polymer solar cells with long operating lifetimes10.1002/aenm.201100138 ↗
4. Minimal long-term intrinsic degradation observed in a polymer solar cell illuminated in an oxygen-free environment10.1021/cm504650a ↗
5. Low band gap polymers for organic photovoltaics10.1016/j.solmat.2007.01.015 ↗
6. Low bandgap semiconducting polymers for polymeric photovoltaics
7. Molecular weight dependent vertical composition profiles of PCDTBT:PC71BM blends for organic photovoltaics10.1038/srep05286 ↗
8. PCDTBT based solar cells: one year of operation under real-world conditions10.1038/srep21632 ↗
9. Bulk heterojunction organic solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
10. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
11. On the efficiency limit of conjugated polymer: fullerene-based bulk heterojunction organic solar cells10.1002/adma.201504914 ↗
12. Continuous flow polymer synthesis toward reproducible large-scale production for efficient bulk heterojunction organic solar cells10.1002/cssc.201500850 ↗
13. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
14. Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution10.1039/C5EE01917F ↗
15. Green-solvent-processable organic solar cells10.1016/j.mattod.2016.02.019 ↗
16. Green-solvent-processed all-polymer solar cells containing a perylene diimide-based acceptor with an efficiency over 6.5%10.1002/aenm.201501991 ↗
17. Yulia Galagan, Ronn Andriessen, Organic Photovoltaics: Technologies and Manufacturing, Third Generation Photovoltaics, Dr. Vasilis Fthenakis (Ed.), ISBN: 978-953-51-0304-2, InTech, (Available from): 〈http://www.intechopen.com/books/third-generation-photovoltaics/organic-photovoltaics-technologies-andmanufacturing〉, 2012.10.5772/25901 ↗
18. Surfactant-free nanoparticulate organic photovoltaics10.1016/j.solmat.2013.10.010 ↗
19. Nano-domain behaviour in P3HT: PCBM nanoparticles, relating material properties to morphological changes10.1016/j.solmat.2013.06.003 ↗
20. Scanning transmission x-ray microscopy of polymer nanoparticles: probing morphology on sub-10nm length scales10.1088/0957-4484/22/26/265710 ↗
21. A multilayer approach to polyfluorene water-based organic photovoltaics10.1016/j.solmat.2012.03.016 ↗
22. The role of miscibility in polymer: fullerene nanoparticulate organic photovoltaic devices10.1016/j.nanoen.2013.03.009 ↗
23. Determining the structural motif of P3HT:PCBM nanoparticulate organic photovoltaic devices10.1016/j.solmat.2012.11.015 ↗
24. Water-based nanoparticulate solar cells using a diketopyrrolopyrrole donor polymer10.1039/c3cp55037k ↗
25. Eco-friendly fabrication of 4% efficient organic solar cells from surfactant-free P3HT:ICBA nanoparticle dispersions10.1002/adma.201402360 ↗
26. PCBM concentration dependent morphology of P3HT in composite P3HT/PCBM nanoparticles10.1016/j.cplett.2009.05.066 ↗
27. Correlation between spectroscopic and morphological properties of composite P3HT/PCBM nanoparticles studied by single particle spectroscopy10.1016/j.jlumin.2009.11.031 ↗
28. Single particle spectroscopy on composite MEH-PPV/PCBM nanoparticles10.1016/j.jlumin.2008.11.009 ↗
29. Novel approaches to polymer blends based on polymer nanoparticles10.1038/nmat889 ↗
30. Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing10.1016/j.orgel.2015.10.011 ↗
31. Nano-pathways: bridging the divide between water-processable nanoparticulate and bulk heterojunction organic photovoltaics10.1016/j.nanoen.2015.11.021 ↗
32. Aqueous processing of low-band-gap polymer solar cells using roll-to-roll methods10.1021/nn200933r ↗
33. Charge transport model for photovoltaic devices based on printed polymer: fullerene nanoparticles10.1016/j.solmat.2015.05.034 ↗
34. Nanomorphology of PCDTBT:PC70BM bulk heterojunction solar cells10.1002/aenm.201100667 ↗
35. Morphology-dependent trap formation in high performance polymer bulk heterojunction solar cells10.1002/aenm.201100204 ↗
36. Exciton formation, relaxation and decay in PCDTBT10.1021/ja105290e ↗
37. Ultrafast exciton dissociation followed by nongeminate charge recombination in PCDTBT:PCBM photovoltaic blends10.1021/ja201837e ↗
38. Charge carrier photogeneration and decay dynamics in the poly(2,7-carbazole) copolymer PCDTBT and in bulk heterojunction composites with PC70BM10.1103/PhysRevB.81.125210 ↗
39. Improving the nanoscale morhology and processibility for PCDTBT-based polymer solar cells via solvent mixtures10.1016/j.orgel.2012.08.003 ↗
40. Fluorescence lifetime standards for time and frequency domain fluorescence spectroscopy10.1021/ac062160k ↗
41. Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends10.1002/adfm.201102510 ↗
42. Effect of mixed solvents on PCDTBT:PC70BM based solar cells10.1016/j.orgel.2011.07.011 ↗
43. Determining the role of polymer molecular weight for high-performance all-polymer solar cells: its effect on polymer aggregation and phase separation10.1021/ja5123182 ↗
44. Molar mass versus polymer solar cell performance: highlighting the role of homocouplings10.1021/acs.chemmater.5b00939 ↗
45. Phase separation of binary blends in polymer nanoparticles10.1002/smll.200600606 ↗
46. Particle formation in the emulsion-solvent evaporation process10.1002/smll.201300372 ↗
47. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
48. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
49. Visualizing physical, electronic, and optical properties of organic photovoltaic cells10.1039/c3ee41773e ↗
50. New picosecond laser system for easy tunability over the whole ultraviolet/visible/near infrared wavelength range based on flexible harmonic generation and optical parametric oscillation10.1063/1.1326930 ↗
51. Radiation damage to fullerite (C60) in the transmission electron microscope10.1063/1.124860 ↗
52. Egerton · 1996
53. Determination of the single-scattering probability distribution from plural-scattering data10.1088/0022-3727/7/6/304 ↗
54. Imidazolium-substituted polythiophenes as efficient electron transport materials improving photovoltaic performance10.1002/aenm.201300049 ↗
55. Miniemulsion polymerization and the structure of polymer and hybrid nanoparticles10.1002/anie.200900723 ↗
56. Femtosecond dynamics of excitons and hole-polarons in composite P3HT/PCBM nanoparticles10.1021/jp308876z ↗
57. Visualizing a homogeneous blend in bulk heterojunction polymer solar cells by analytical electron microscopy
58. Fluorinated copolymer PCDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells10.1021/ja305039j ↗
59. Quantitative tomography of organic photovoltaic blends at the nanoscale10.1021/acs.nanolett.5b02437 ↗
60. Nanoscale structure measurements for polymer-fullerene photovoltaics10.1039/c2ee02725a ↗
61. Visualizing photovoltaic nanostructures with high-resolution analytical electron microscopy reveals material phases in bulk heterojunctions10.1016/j.synthmet.2011.09.011 ↗
62. Revealing nanoscale phase separation in small-molecule photovoltaic blends by plasmonic contrast in the TEM10.1016/j.orgel.2012.03.008 ↗
63. Square-centimeter-sized high-efficiency polymer solar cells: how the processing atmosphere and film quality influence performance at large scale10.1002/aenm.201600290 ↗
64. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
65. Light-induced degradation of polymer: fullerene photovoltaic devices: an intrinsic or material-dependent failure mechanism?10.1002/aenm.201400848 ↗
66. Investigation on the effects of thermal annealing on PCDTBT:PCBM bulk-heterojunction polymer solar cells10.1063/1.4791268 ↗
67. Nanoscale mapping by electron energy-loss spectroscopy reveals evolution of organic solar cell contact selectivity10.1016/j.orgel.2014.11.007 ↗
68. Uncovering buried structure and interfaces in molecular photovoltaics10.1002/adfm.201400345 ↗