journal article·2009-10

Direct patterned etching of silicon dioxide and silicon nitride dielectric layers by inkjet printing

Alison J. Lennon, Anita W.Y. Ho-Baillie, Stuart R. Wenham

Publisher page

Abstract

Abstract An inkjet method for the direct patterned etching of silicon dioxide and silicon nitride dielectric is described. The method involves fewer steps, lower chemical usage and generates less hazardous chemical waste than existing resist-based patterning methods (e.g., photolithography), which employ immersion etching. Holes of diameter 40–50 μm and grooves 50–60 μm wide were etched in 300 nm silicon dioxide layers. Grooves were also etched in 75 nm silicon nitride layers formed on textured silicon surfaces. The resulting patterned dielectric layers were used to facilitate masked etching, local diffusions and metal contacting of underlying silicon for solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanowire Synthesis and Applications · Thin-Film Transistor Technologies · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Green · 1995
2. Bulk micromachining of silicon10.1109/5.704259 ↗
3. 24.5% Efficiency silicon PERT cells on MCZ substrates and 24.7% efficiency PERL cells on FZ substrates10.1002/(SICI)1099-159X(199911/12)7:6<471::AID-PIP298>3.0.CO;2-7 ↗
4. Analysis of the optical properties of screen-printed and aerosol-printed and plated fingers of silicon solar cells10.1155/2008/759340 ↗
5. M. Bähr, S. Kim, S. Sridharan, C. Khadilkar, A. Shaikh, I. Köhler, M. Reichardt, M. Kumar, A new approach for front side metallisation of industrial type silicon solar cells using a structurization by etching, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, Milan, Italy, 2007, pp. 1015–1019.
6. Buried contact silicon solar cells10.1002/pip.4670010102 ↗
7. B.S. Tjahjono, J.H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S.R. Wenham, High efficiency solar cell structure through the use of laser doping, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September 2007, Milan, Italy, pp. 966–969.
8. Laser chemical processing (LCP)-A versatile tool for microstructuring applications10.1007/s00339-008-4723-8 ↗
9. Crystalline silicon on glass (CSG) thin-film solar cell modules10.1016/j.solener.2004.06.023 ↗
10. Forming openings to semiconductor layers of silicon solar cells by inkjet printing10.1016/j.solmat.2008.05.018 ↗
11. J. Specht, D. Biro, N. Mingirulli, M. Aleman, U. Belledin, R. Efinger, D. Erath, L. Gautero, A. Lemke, D. Stüwe, J. Rentsch, R. Preu, Using hotmelt-inkjet as a structuring method for higher efficiency industrial silicon solar cells, in: Proceedings of the Digital Fabrication 2008 Conference, 6–11 September 2008, Pittsburgh, USA, pp. 912–917.10.2352/ISSN.2169-4451.2008.24.1.art00116_2 ↗
12. Fine line printed silicon solar cells exceeding 20% efficiency10.1002/pip.850 ↗
13. Metal aerosol jet printing for solar cell metallisation10.1002/pip.759 ↗
14. Beneficial and constraining effects of laser scribing in buried contact solar cells10.1002/(SICI)1099-159X(199703/04)5:2<131::AID-PIP162>3.0.CO;2-N ↗
15. International Finance Corporation, Environmental, Health, and Safety Guidelines for Semiconductors & Other Electronics Manufacturing, 30 April 2007, p. 10.
16. Wet chemical etching of silicate glasses in hydrofluoric acid based solutions10.1007/BF01352182 ↗
17. Principles of wet chemical processing in ULSI microfabrication10.1109/66.75861 ↗
18. Etch rates for micromachining processing – Part II10.1109/JMEMS.2003.820936 ↗
19. Dimatix Application Note, Dimatix materials printer: jettable fluid formulation guidelines, 〈http://www.dimatix.com/files/Dimatix-Materials-Printer-Jettable-Fluid-Formulation-Guidelines.pdf〉.
20. A study of the dissolution of SiO2 in acidic fluoride solutions10.1149/1.2407835 ↗
21. Madou · 2002
22. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
23. Anisotropic etching of crystalline silicon in alkaline solutions10.1149/1.2086277 ↗
24. N. Borojevic, A. Ho-Baillie, R. Utama, A. Lennon, M. Lenio, A. Karpour, S. Wenham, Inkjet texturing for high efficiency silicon solar cells, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, 1–5 September 2008, Valencia, Spain, pp. 1829–1832.
25. Buried contact silicon solar cells10.1002/pip.4670010102 ↗
26. B.S. Tjahjono, J.H. Guo, Z. Hameiri, L. Mai, A. Sugianto, S. Wang, S. Wenham, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September 2007, Milan, Italy, pp. 966–969.
27. K. Ozawa, T. Usui, H. Takahashi, S. Sakai, Development of a femtoliter piezo inkjet head for high resolution printing, in: Proceedings of the Digital Fabrication 2007 Conference, 16–21 September 2007, Anchorage, Alaska, USA, pp. 898–901.10.2352/ISSN.2169-4451.2007.23.1.art00095_2 ↗
28. FUJIFILM Dimatix, Materials Printer & Cartridge DMP-2831& DMC11601/11610 Datasheet (Rev 0.2), 〈http://www.dimatix.com/files/DMP2831-Datasheet.pdf〉, 2006, p. 2.
29. T. Xu, D. Albertalli, Achieving high accuracy and precision inkjet drop placement using imperfect components in and imperfect environment, in: Proceedings of the IMID/IDMC 2006 Conference, 22–25 August 2006, Daegu, Korea, pp. 1660–1665.
30. Inkjet printing of polymer micro-arrays and libraries: instrumentation, requirements and perspectives10.1002/marc.200350010 ↗
31. iti Corporation, MDS 300 Materials Deposition System, 〈http://www.iticorp.com/pdf/iTi-MDS300-0208.pdf〉, 2008.