journal article·2015-05

Bimodally dispersed silver paste for the metallization of a crystalline silicon solar cell using electrohydrodynamic jet printing

Dong-Youn Shin, Jun-Young Seo, Hyowon Tak, Doyoung Byun

Publisher page

Abstract

Abstract Conventional silver paste for crystalline silicon solar cells exhibits low cell efficiency when deposited by non-contact electrohydrodynamic jet printing because of either high volumetric shrinkage or low packing density when there is no printing pressure applied to the silver paste. Therefore, we develop bimodally dispersed silver paste for electrohydrodynamic jet printing to resolve both volumetric shrinkage and packing density of the conventional silver paste, and its electrical and rheological traits are investigated. The bimodally dispersed silver paste exhibits lower unit-line resistance, which is inversely proportional to the weight ratio of small-to-large silver particles due to the increased packing density, and higher contact resistivity above a certain weight ratio for small-to-large silver particles. This behaviour results from the obstructed melt flow of glass frit by the early coarsened and densified small silver particles at an elevated temperature. The increased weight ratio of the small particles also raises the viscosity of the bimodally dispersed silver paste above the point where electrohydrodynamic jet printing is possible. By employing a binary solvent mixture and metallorganic silver as a viscosity reducing agent, the bimodally dispersed silver paste is tuned for electrohydrodynamic jet printing, and the front-side metallization of a polycrystalline silicon solar cell with the emitter sheet resistance of 60 Ω/sq is constructed. With the abnormally high aspect ratio of silver electrodes at 0.86, a cell efficiency of 16.72% is achieved, which is higher than that of screen-printed cells with the similar emitter sheet resistance by +0.22–0.52%p.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Nanomaterials and Printing Technologies · Electrowetting and Microfluidic Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. China’s solar photovoltaic industry development: the status quo, problems and approaches10.1016/j.apenergy.2013.12.032 ↗
2. Advances in crystalline silicon solar cell technology for industrial mass production10.1038/asiamat.2010.82 ↗
3. Metal aerosol jet printing for solar cell metallization10.1002/pip.759 ↗
4. Silicon solar cells exceeding 20% efficiency10.1002/pip.850 ↗
5. Fabrication of an inkjet-printed seed pattern with silver nanoparticulate ink on a textured silicon solar cell wafer10.1088/0960-1317/20/12/125003 ↗
6. Towards ink-jet printed fine line front side metallization of crystalline silicon solar cells10.1016/j.solmat.2010.12.031 ↗
7. Impact of effective volume ratio of a dispersant to silver nano-particles on silicon solar cell efficiency in direct ink-jet metallization10.1088/0960-1317/22/11/115007 ↗
8. Investigations of thick-film-paste rheology for dispensing applications10.1016/j.egypro.2011.06.164 ↗
9. The fabrication of front electrodes of Si solar cell by dispensing printing10.1016/j.mseb.2011.12.027 ↗
10. Process development for a high-throughput fine line metallization approach based on dispensing technology10.1016/j.egypro.2014.02.001 ↗
11. Analysis of series resistance of crystalline silicon solar cell with two-layer front metallization based on light-induced plating10.1016/j.solmat.2010.05.037 ↗
12. High-resolution electrohydrodynamic jet printing10.1038/nmat1974 ↗
13. Organic transistors manufactured using inkjet technology with subfemtoliter accuracy10.1073/pnas.0708340105 ↗
14. Invisible Ag grid embedded with ITO nanoparticle layer as a transparent hybrid electrode10.1016/j.solmat.2014.03.003 ↗
15. Non-contact printing of high aspect ratio Ag electrodes for polycrystalline silicone solar cell with electrohydrodynamic jet printing10.1063/1.4798332 ↗
16. A novel method for the determination of the front contact resistance in large area screen printed silicon solar cells10.1088/0268-1242/15/3/311 ↗
17. Specific contact resistance measurements of the screen-printed Ag thick film contacts in the silicon solar cells by three-point probe methodology and TLM method10.1007/s10854-011-0295-z ↗
18. The electrical and microstructural properties of electroplated screen-printed Ag metal contacts in crystalline silicon solar cells10.1039/c3ra40823j ↗
19. Characterization of microstructured fibre emitters: in pursuit of improved nano electrospray ionization performance10.1039/c2an35249d ↗
20. Magdassi · 2009
21. Boch · 2007
22. Effect of Ag particle size in thick-film Ag paste on the electrical and physical properties of screen printed contacts and silicon solar cells10.1149/1.2126579 ↗
23. Capillary flow of amorphous metal for high performance electrode10.1038/srep02185 ↗
24. The effect of diameter ratio and volume ratio on the viscosity of bimodal suspensions of polymer lattices10.1006/jcis.1997.4915 ↗
25. Effects of metallo-organic decomposition agents on thermal decomposition and electrical conductivity of low-temperature-curing silver paste10.1143/JJAP.45.6987 ↗
26. Characterization of the low-curing-temperature silver paste with silver 2-ethylhexanoate addition10.1143/JJAP.46.251 ↗
27. Resistivity transition mechanism of silver salts in the next generation conductive ink for a roll-to-roll printed film with a silver network10.1039/c2jm30198a ↗
28. Contact resistivity decrease at a metal/semiconductor interface by a solid-to-liquid phase transitional metallo-organic silver10.1021/am503548h ↗
29. SEMI P.V. Group 2012, International Technology Roadmap for Photovoltaic (ITRPV.net), Results 2011, 〈http://www.itrpv.net/.cm4all/iproc.php/Reports%20downloads/roadmap_itrpv_march_2012_full_web.pdf〉, last accessed on the 23rd October, 2014.
30. Series resistance characterization of industrial silicon solar cells with screen-printed contacts using hotmelt paste10.1002/pip.755 ↗