New potential for reduction of kerf loss and wire consumption in multi-wire sawing
Source abstract
Abstract
Abstract Wafer production with multi-wire sawing leads to a high consumption of wire and a relatively high offcut (kerf loss) of high purity silicon material. In this paper a new approach to reduce these costs in order to achieve a more cost efficient wafering is developed. Investigations of wire behavior during multi-wire sawing have been carried out at commercial multi wire-saws for large-scale production. Virgin and worn wire samples as well as silicon bricks were analyzed with regard to wear condition and diameter. These analyses revealed that material removal (abrasion) occurs mainly at one side of the wire. This suggests that no rotation of the wire around his longitudinal axis takes place during slicing. Because of these findings, a method was developed which is based on a wire with a non-circular cross-section. By this approach, a better exploitation of silicon material and wire can lead to a better cost-effectiveness of wafer and hence solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Silicon and Solar Cell Technologies · Vibration and Dynamic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Basic mechanisms and models of multi-wire sawing10.1002/adem.200400578 ↗
2. M. Schumann, M. Singh, T. Orellana Pérez, Reaching a Kerf loss below 100µm by optimizing the relation between wire thickness and abrasive size for multi-wire sawing, in: Proceeding of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1222–1227.
3. Thin crystalline silicon solar cells10.1016/S0927-0248(01)00164-7 ↗
4. B. Hejazialhosseini, F. Noca, P. Monkewitz, Fluid mechanics of wire sawing, in: Proceeding of the 24th European Photovoltaic Solar Energy Conference, Hamburg, Germany, 2009, pp. 1038–1040.
5. Galerkin-based modal analysis on the vibration of wire-slurry10.1016/j.jsv.2004.04.018 ↗
6. M.A. Costantini, J.A. Talbott, M. Chandra, Method and apparatus for improved wire saw slurry, Patent Number: 6,113,473, 2000.
7. Removal of silicon carbide from Kerf loss slurry by Al–Si alloying process10.1016/j.seppur.2012.01.021 ↗
8. Recovery of silicon from Kerf loss slurry waste for photovoltaic applications10.1002/pip.863 ↗
9. Recovery of silicon powder from kerf loss slurry by centrifugation10.1016/j.powtec.2010.02.028 ↗
10. D. Kray, M. Schumann, A. Eyer, Solar wafer slicing with loose and fixed grains, in: Proceeding of the IEEE 4th World Conference on Photovoltaic Energy Conversion, Waikoloa, Hawaii, 2006, pp. 948–951.10.1109/WCPEC.2006.279613 ↗
11. Characterization of polycrystalline silicon wafers for solar cells sliced with novel fixed-abrasive wire10.1002/pip.923 ↗
12. Fixed abrasive diamond wire machining-part I process10.1016/S0890-6955(02)00215-8 ↗
13. Thin Czochralski silicon solar cells based on diamond wire sawing technology10.1016/j.solmat.2011.11.028 ↗
14. V. Herold, S. König, M. Berg, An unconventional experimental setup for testing cutting performance/wear resistance of diamond cutting wires, in: Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology, Berlin, 2013, pp. 61-64.
15. Abrasive electrochemical multi-wire slicing of solar silicon ingots into wafers10.1016/j.cirp.2011.03.069 ↗
16. S. Kaminski, T. Wagner, R. Rietzschel, The role of the slurry transport in multi-wire sawing of solar silicon wafers, in: Proceedings of the 25th European Photovoltaic Solar Energy Conference and Exhibition, Valencia, Spain, 2010, pp. 1312–1317.
17. M. Kuna, A. Ams, T. Liedke, Experimentelle und theoretische Untersuchungen von Beanspruchung und Verschleiß des Drahtes zur Leistungssteigerung beim Sägen von Solarsilizium, Abschlussbericht zum Verbundprojekt NEON, Teilprojekt Draht, 2007.
18. Free abrasive wire saw machining of ceramics10.1007/s00170-007-1355-7 ↗
19. S. Retsch, T. Behm, C. Funke, Investigation of damage mechanisms on wafers and wires in the wiresawing process, From a talk at the Conference "Freiberger Silicon Days", Freiberg, 2011
20. Mechanisms of wafer sawing and impact on wafer properties10.1002/pip.972 ↗
21. Berg · 2012
22. M. Berg, S. Schwinde, B. Bussemer, Method for separating silicon wafer from each other by semiconductor material ingot using e.g. multi-wire saw, involves separating wafers from each other by relative movement between ingot and wire groups, Patent Number: DE 102012101251 A1, 2013.