Cu2ZnSn(S, Se)4 thin film absorbers based on ZnS, SnS and Cu3SnS4 nanoparticle inks: Enhanced solar cells performance by using a two-step annealing process
Source abstract
Abstract
In this paper, we present the fabrication of Cu2ZnSn(S, Se)4 (CZTSSe) thin film absorbers by a four-step solution process based on ZnS, SnS and Cu3SnS4 nanoparticle precursors and their application in thin film solar cells. The influence of ligand-exchange process on the morphologies of the resulting CZTSSe thin films was studied. Ligand exchange with each sequential spun coat layers leads to cracking films which can be avoided by combining ligand-exchanged and non-ligand-exchanged processes. Moreover, a two-step annealing process yields the most homogeneous films. CZTSSe thin films consisting a large grain and fine nanoparticle grain layered structure was formed. The formation of layered structure for the absorbers was found to be due to the existence of high content of carbon left near the back contact and the out diffusion of Cu and Zn from the bottom layer to the surface layer. As a result, solar cell conversion efficiency was improved from 1.2% to 3.0% upon adoption a two-step annealing process. Temperature dependent I–V characteristic analysis reveals the dominant loss mechanism of the solar cells is the strong CZTSSe and CdS buffer interface recombination.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Solar cell efficiency tables (version 44)10.1002/pip.2525 ↗
2. Cu2ZnSnS4 thin film solar cells by fast coevaporation10.1002/pip.976 ↗
3. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
4. Cu2ZnSnSe4 thin film solar cells produced via co-evaporation and annealing including a SnSe2 capping layer10.1002/pip.2324 ↗
5. Coevaporation of Cu2ZnSnSe4 thin films10.1063/1.3483760 ↗
6. High-efficiency solar cell with Earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
7. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
8. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
9. Novel solution processing of high-efficiency Earth-abundant Cu2ZnSn(S,Se)4 solar cells10.1002/adma.201201785 ↗
10. High-efficiency solution-processed Cu2ZnSn(S,Se)4 thin-film solar cells prepared from binary and ternary nanoparticles10.1021/ja3057985 ↗
11. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
12. Benign solutions and innovative sequential annealing processes for high performance Cu2ZnSn(Se,S)4 photovoltaics10.1002/aenm.201301287 ↗
13. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
14. Enhancing the performance of CZTSSe solar cells with Ge alloying10.1016/j.solmat.2012.05.039 ↗
15. Novel non-hydrazine solution processing of earth-abundant Cu2ZnSn(S,Se)4 absorbers for thin-film solar cells10.1039/c3ta10566k ↗
16. Fabrication of Cu2ZnSnS4 solar cells with 5.1% efficiency via thermal decomposition and reaction using a non-toxic sol–gel route10.1039/C3TA13533K ↗
17. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S,Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
18. A 3.2% efficient kesterite device from electrodeposited stacked elemental layers10.1016/j.jelechem.2010.01.008 ↗
19. Highly efficient copper–zinc–tin–selenide (CZTSe) solar cells by electrodeposition10.1002/cssc.201301347 ↗
20. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack10.1002/aenm.201301381 ↗
21. Cu2ZnSnS4 thin film solar cells from electroplated precursors: novel low-cost perspective10.1016/j.tsf.2008.11.061 ↗
22. Structural and optical properties of Cu2ZnSnS4 thin film absorbers from ZnS and Cu3SnS4 nanoparticle precursors10.1016/j.tsf.2012.10.034 ↗
23. Surfactant ligand removal and rational fabrication of inorganically connected quantum dots10.1021/nl202892p ↗
24. One-step solution-based synthesis and characterization of kuramite Cu3SnS4 nanocrystals10.1039/c2ra21777e ↗
25. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
26. Composition dependence of structure and optical properties of Cu2ZnSn(S,Se)4 solid solutions: an experimental study10.1016/j.jallcom.2011.08.099 ↗
27. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency
28. A high efficiency electrodeposited Cu2ZnSnS4 Solar cell10.1002/aenm.201100526 ↗
29. Fabrication of 7.2% efficient CZTSSe solar cells using CZTS nanocrystals10.1021/ja108427b ↗
30. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell10.1002/pip.1160 ↗
31. Beyond 11% efficiency: characteristics of state-of-the-art Cu2ZnSn(S,Se)4 solar cells10.1002/aenm.201200348 ↗
32. High-efficiency solar cell with earth-abundant liquid-processed absorber10.1002/adma.200904155 ↗
33. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
34. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
35. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
36. Electronic properties of CuGaSe2-based heterojunction solar cells. Part I. Transport analysis10.1063/1.371903 ↗
37. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells10.1063/1.3522884 ↗
38. Temperature dependence of Cu2ZnSnS4 photovoltaic cell properties10.1143/APEX.5.082302 ↗