journal article·2014-04

Growth kinetics of Ag3Sn in silicon solar cells with a sintered Ag metallization layer

T.L. Yang, K.Y. Huang, S. Yang, H.H. Hsieh, C.R. Kao

Publisher page

Abstract

Abstract The interfacial reactions and growth kinetics of intermetallic compounds at the solder/sintered Ag metallization interface in silicon solar cells were investigated during solid-state aging. Three common solders (Sn 37 Pb, Sn 36 Pb 2 Ag, and Sn 3 Ag 0.5 Cu) were used to conduct several experiments testing the quality of the solder joints in this study. Accelerated tests were performed to determine the long-term reliability of the solder joints. The storage temperatures were 100, 120, 150, and 180±1 °C for various aging durations. The results showed that the sintered Ag electrode gradually transformed into an Ag 3 Sn intermetallic compound (IMC), and the growth kinetics of Ag 3 Sn remained a diffusion-controlled process during isothermal aging. The formation of Ag 3 Sn increased the series resistances ( R S ) of the cell modules because Ag 3 Sn had a higher electrical resistivity than sintered Ag did. In addition, the results revealed that Sn 3 Ag 0.5 Cu PV ribbon effectively slowed down the growth kinetics of Ag 3 Sn. The apparent activation energies for Ag 3 Sn at Sn 37 Pb/sintered Ag, Sn 36 Pb 2 Ag/sintered Ag, and Sn 3 Ag 0.5 Cu/sintered Ag interfaces were calculated to be 104, 108, and 121 KJ/mole, respectively. These kinetics data were established for the first time for the solder alloys commonly used in PV module assembly industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. The effects of temperature and solder on the wettability between ribbon and solar cell10.1016/j.solmat.2008.10.005 ↗
2. S. Schindler, S. Wiese, Investigation of wettability and interface reactions of Sn–Pb, Sn–Cu, Sn–Ag and Sn–Ag–Cu solders for solar cell interconnections, in: Proceedings of the 3rd Electronic System-Integration Technology Conference (ESTC), (2010), pp. 1–5.10.1109/ESTC.2010.5642904 ↗
3. J. Moyer, W. Zhang, Solder wetting measurement of back contact paste using a wetting balance, in: Proceedings of the 34th Photovoltaic Specialists Conference (PVSC), (2009), pp. 1838–1841.10.1109/PVSC.2009.5411516 ↗
4. Durability of Pb-free solder between copper interconnect and silicon in photovoltaic cells10.1002/pip.944 ↗
5. A.M. Gabor, M. Ralli, S. Montminy, L. Alegria, C. Bordonaro, J. Woods, L. Felton, Soldering induced damage to thin Si solar cells and detection of cracked cells in modules, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, (2006).
6. Field failure mechanism study of solder interconnection for crystalline silicon photovoltaic module10.1016/j.microrel.2012.06.027 ↗
7. S. Wiese, F. Kraemer, N. Betzl, D. Wald, Interconnection technologies for photovoltaic modules-analysis of technological and mechanical problems, in: Proceedings of the 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems, (2010), pp. 1–6.10.1109/ESIME.2010.5464518 ↗
8. S. Nieland, M. Baehr, A. Boettger, A. Ostman, and H. Reichi, Advantages of microelectronic packaging for low temperature lead free soldering of thin solar cells, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, (2007).
9. J. Wendt, M. Träger, M. Mette, A. Pfennig, B. Jäckel, The link between mechanical stress induced by soldering and micro damages in silicon solar cells, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, (2009).
10. Effects of intermetallic compounds on properties of Sn–Ag–Cu lead-free soldered joints10.1016/S0925-8388(02)01166-0 ↗
11. Reactions between Sn–Ag–Cu lead-free solders and the Au/Ni surface finish in advanced electronic packages10.1108/09540910210444692 ↗
12. Interfacial reaction between multicomponent lead-free solders and Ag, Cu, Ni, and Pd substrates10.1007/s11664-004-0108-8 ↗
13. Cu/Sn interfacial reactions: thin-film case versus bulk case10.1016/S0254-0584(97)80016-8 ↗
14. Interfacial reaction issues for lead-free electronic solders
15. Solid-state reactions between Ni and Sn–Ag–Cu solders with different Cu concentrations10.1016/j.msea.2005.02.008 ↗
16. Interactions between solder and metallization during long-term aging advanced microelectronic packages10.1007/s11664-001-0047-6 ↗
17. Study of interaction between Cu–Sn and Ni–Sn interfacial reactions by Ni–Sn3.5Ag–Cu sandwich structure10.1007/s11664-003-0027-0 ↗
18. Interfacial reactions in Ag–Sn/Cu couples10.1007/s11664-999-0158-z ↗
19. Modeling of Ag3Sn coarsening and its effects on creep in Sn–Ag–Cu solder
20. L.J. Caballero, P. Sánchez-Friera, B. Lalaguna, J. Alonso, M.A. Vázquez, Series resistance modelling of industrial screen-printed monocrystalline silicon solar cells and modules including the effect of spot soldering, in: Proceedings of the 4th World Conference on Photovoltaic Energy Conversion, (2006), pp. 1388–1391.10.1109/WCPEC.2006.279710 ↗
21. Performance of low series-resistance interconnections on the polycrystalline solar cells10.1016/j.solmat.2010.04.034 ↗
22. Effect of Ag particles on wettability and creep rupture life of SnCu based composite solders10.4028/www.scientific.net/MSF.650.78 ↗
23. R. Pandher, T. Lawlor, Effect of silver in common lead-free alloys, in: Proceedings of International Conference on Soldering and Reliability, (2009).