journal article·2022-10Open access

Thermal performance of nanofluids based on tungsten disulphide nanosheets as heat transfer fluids in parabolic trough solar collectors

Paloma Martínez-Merino, Patrice Estellé, Rodrigo Alcántara, Iván Carrillo-Berdugo, Javier Navas

Abstract

Nanofluids are considered as a new generation of heat transfer fluids since they exhibit thermophysical properties improvements compared with conventional heat transfer fluids. The high thermal conductivity of nanofluids and even the isobaric specific heat enhancements over conventional liquids make these colloidal suspensions very attractive in many research areas, including solar energy. In this work, nanofluids based on tungsten disulphide (WS2) nanosheets have been prepared from the thermal oil currently used as heat transfer fluid in Concentrating Solar Power (CSP) plants. The high aspect ratio of WS2 bidimensional nanostructures provides high long-term colloidal stability to the nanofluids and facilitates heat transport. Cetyltrimethylammonium bromide and polyethylene glycol have been used as surfactants to improve the exfoliation process and enhance the colloidal stability of the nanomaterial dispersions. Some properties such as density and viscosity of the base fluid have not been significantly altered by the presence of WS2 nanosheets in the base fluid. However, studies on the thermal properties of nanofluids have shown promising results with increases in thermal conductivity of up to 33% and heat transfer coefficient by 21% over the base fluid. Furthermore, it has been estimated that the overall efficiency of the CSP system could be improved by 31% by replacing the conventional thermal fluid with 2D-WS2-based nanofluids.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Solar-Powered Water Purification Methods · Phase Change Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. Enhancing thermal conductivity of fluids with nanoparticles
2. A review of the recent progress on thermal conductivity of nanofluid10.1016/j.molliq.2021.116929 ↗
3. Enhancement of heat transfer using nanofluids-An overview10.1016/j.rser.2009.10.004 ↗
4. Experimental and theoretical studies of nanofluid thermal conductivity enhancement: a review
5. Review on nanofluids characterization, heat transfer characteristics and applications10.1016/j.rser.2016.05.079 ↗
6. Recent advances in application of nanofluids in heat transfer devices: a critical review10.1016/j.rser.2018.12.057 ↗
7. Stability of nanofluid: a review10.1016/j.applthermaleng.2020.115259 ↗
8. A review of influence of nanoparticle synthesis and geometrical parameters on thermophysical properties and stability of nanofluids10.1016/j.tsep.2019.04.010 ↗
9. Preparation, applications and challenges of nanofluids in electronic cooling: a systematic review10.1016/j.matpr.2020.11.679 ↗
10. Application of nanofluids to a heat pipe liquid-block and the thermoelectric cooling of electronic equipment10.1016/j.expthermflusci.2011.04.015 ↗
11. Second law analysis of a nanofluid-based solar collector using experimental data10.1007/s10973-016-5522-7 ↗
12. Potential evaluation of hybrid nanofluids for solar thermal energy harvesting: a review of recent advances
13. Solar energy harvesting by cobalt oxide nanoparticles, a nanofluid absorption based system
14. Natural convection cooling of a localised heat source at the bottom of a nanofluid-filled enclosure10.1016/j.euromechflu.2009.05.006 ↗
15. Cooling performance of a microchannel heat sink with nanofluids10.1016/j.applthermaleng.2006.02.036 ↗
16. Performance investigation of an automotive car radiator operated with nanofluid-based coolants (nanofluid as a coolant in a radiator)10.1016/j.applthermaleng.2010.07.019 ↗
17. Description of viscous dissipation in magnetohydrodynamic flow of nanofluid: applications of biomedical treatment10.1177/1687814020926359 ↗
18. Role of nanofluids in drug delivery and biomedical technology: methods and applications10.2147/NSA.S260374 ↗
19. Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy10.1016/j.jclepro.2018.09.150 ↗
20. The use of nanofluids in solar concentrating technologies: a comprehensive review10.1016/j.jclepro.2018.06.048 ↗
21. Application of large-scale prepared MWCNTs nanofluids in solar energy system as volumetric solar absorber
22. Progress in concentrated solar power technology with parabolic trough collector system: a comprehensive review10.1016/j.rser.2017.05.174 ↗
23. Commercial parabolic trough CSP plants: research trends and technological advancements10.1016/j.solener.2020.09.072 ↗
24. A comprehensive review of state-of-the-art concentrating solar power (CSP) technologies: current status and research trends10.1016/j.rser.2018.04.097 ↗
25. Concentrating solar power: a renewable energy frontier
26. Concentrating solar power in europe, the Middle East and North africa: a review of development issues and potential to 205010.1115/1.4006390 ↗
27. Concentrating solar power advances in geometric Optics, materials and system integration10.3390/en14196229 ↗
28. Recent developments in geometrical configurations of thermal energy storage for concentrating solar power plant10.1016/j.rser.2015.12.355 ↗
29. Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies10.1016/j.rser.2015.09.026 ↗
30. Performance analysis of direct absorption-based parabolic trough solar collector using hybrid nanofluids
31. Performance evaluation of various nanofluids for parabolic trough collectors
32. Heat transfer fluids for concentrating solar power systems - a review10.1016/j.apenergy.2015.01.125 ↗
33. State-of-the-art review on water-based nanofluids for low temperature solar thermal collector application10.1016/j.solmat.2021.111220 ↗
34. High-temperature corrosion behavior of austenitic stainless steel in quaternary nitrate molten salt nanofluids for concentrated solar power10.1016/j.solmat.2022.111851 ↗
35. K2CO3–Li2CO3 molten carbonate mixtures and their nanofluids for thermal energy storage: an overview of the literature10.1016/j.solmat.2021.111525 ↗
36. Nanofluids and their properties10.1115/1.4005492 ↗
37. Silicone oil nanofluids dispersed with mesoporous crumpled graphene for medium-temperature direct absorption solar-thermal energy harvesting10.1016/j.solmat.2022.111794 ↗
38. Energy, exergy, economic and environmental (4E) analysis of a parabolic trough solar collector using MXene based silicone oil nanofluids10.1016/j.solmat.2022.111633 ↗
39. Application of nanofluids in thermal performance enhancement of parabolic trough solar collector: state-of-the-art
40. Review on nanofluid role & design aspects to enhance the thermal performance of the parabolic trough collector10.1063/5.0025046 ↗
41. Optical absorption measurements of oxide nanoparticles for application as nanofluid in direct absorption solar power systems – Part II: ZnO, CeO2, Fe2O3 nanoparticles behavior10.1016/j.solmat.2015.12.030 ↗
42. Optical and transport properties of Metal−Oil nanofluids for thermal solar industry: experimental characterization, performance assessment, and molecular dynamics insights10.1021/acssuschemeng.1c00053 ↗
43. CuO-containing oil-based nanofluids for concentrating solar power: an experimental and computational integrated insight10.1016/j.molliq.2020.114643 ↗
44. Transition metal dichalcogenides and beyond: synthesis, properties, and applications of single- and few-layer nanosheets10.1021/ar5002846 ↗
45. Progress and prospects in transition-metal dichalcogenide research beyond 2D10.1021/acs.chemrev.0c00505 ↗
46. 2D transition metal dichalcogenides10.1038/natrevmats.2017.33 ↗
47. Liquid exfoliation of layered materials10.1126/science.1226419 ↗
48. High-yield production of graphene by liquid-phase exfoliation of graphite10.1038/nnano.2008.215 ↗
49. Liquid phase exfoliation of two-dimensional materials by directly probing and matching surface tension components10.1021/acs.nanolett.5b01842 ↗
50. MoS2 nanosheets vs. nanowires: preparation and a theoretical study of highly stable and efficient nanofluids for concentrating solar power10.1039/C8TA03817A ↗
51. 2D MoSe2-based nanofluids prepared by liquid phase exfoliation for heat transfer applications in concentrating solar power
52. Preparation, sedimentation, and agglomeration of nanofluids10.1002/ceat.201400268 ↗
53. Influence of aggregation on thermal conductivity in stable and unstable nanofluids10.1063/1.3497280 ↗
54. Investigation of enhanced thermal properties in NiO-based nanofluids for concentrating solar power applications: a molecular dynamics and experimental analysis10.1016/j.apenergy.2017.11.069 ↗
55. Two-dimensional nanosheets produced by liquid exfoliation of layered materials10.1126/science.1194975 ↗
56. Thermal conductivity measurements of nanofluids10.1016/j.ijheatmasstransfer.2016.09.080 ↗
57. Nanofluids for heat transfer: an engineering approach10.1186/1556-276X-6-182 ↗
58. Eagleson · 1994
59. A state of the art review on viscosity of nanofluids10.1016/j.rser.2017.03.113 ↗
60. Heat transfer and pressure drop performance of Nanofluid: a state-of- the-art review10.1016/j.ijft.2021.100065 ↗
61. Determination of effective specific heat of nanofluids10.1080/17458080.2010.498838 ↗
62. A comparative review on the specific heat of nanofluids for energy perspective10.1016/j.rser.2014.05.081 ↗
63. Towards the improvement of the global efficiency of concentrating solar power plants by using Pt-based nanofluids: the internal molecular structure effect10.1016/j.apenergy.2018.07.062 ↗
64. Insights into the stability and thermal properties of WSe2 -based nanofluids for concentrating solar power prepared by liquid phase exfoliation10.1016/j.molliq.2020.114333 ↗
65. On the specific heat capacity enhancement in nanofluids10.1186/s11671-015-1188-5 ↗
66. Enhancement of specific heat capacity of high-temperature silica-nanofluids synthesized in alkali chloride salt eutectics for solar thermal-energy storage applications10.1016/j.ijheatmasstransfer.2010.11.017 ↗
67. Effect of liquid layering at the liquid–solid interface on thermal transport10.1016/j.ijheatmasstransfer.2004.05.016 ↗
68. Thermal conductivity of nanoscale colloidal solutions (nanofluids)10.1103/PhysRevLett.94.025901 ↗
69. Heat conduction mechanisms in nanofluids and suspensions10.1016/j.nantod.2012.02.007 ↗
70. Convective transport in nanofluids10.1115/1.2150834 ↗
71. Aggregation structure and thermal conductivity of nanofluids10.1002/aic.690490420 ↗
72. Effect of CNT structures on thermal conductivity and stability of nanofluid10.1016/j.ijheatmasstransfer.2011.11.004 ↗
73. Thermal and electrical conductivities of water-based nanofluids prepared with long multiwalled carbon nanotubes10.1063/1.2908229 ↗
74. Morphology dependence of thermal and rheological properties of oil-based nanofluids of CuO nanostructures10.1016/j.colsurfa.2015.02.049 ↗
75. Thermal conductivity of suspensions containing nanosized SiC particles10.1023/A:1015121805842 ↗
76. Review of convective heat transfer enhancement with nanofluids10.1016/j.ijheatmasstransfer.2009.02.006 ↗
77. Analytical expression of parabolic trough solar collector performance
78. Modelling the efficiency of a nanofluid-based direct absorption parabolic trough solar collector10.1016/j.solener.2017.10.066 ↗
79. Bergman · 2011