Investigation of In2O3:SnO2 films with different doping ratio and application as transparent conducting electrode in silicon heterojunction solar cell
Source abstract
Abstract
Abstract Transparent conducting oxide films were performed from SnO2-doped In2O3 with different doping ratio of 97:3 and 95:5 (ITO) by pulsed DC magnetron sputtering in argon and oxygen atmosphere. The effect of oxygen content on the structural, electrical and optical properties of films was investigated. Proper oxygen content improved the properties of ITO films. All films showed the polycrystalline structures. The optimal Hall mobility and resistivity reached 32.2 cm2/V·S and 4.5 × 10−4 Ω cm, respectively. The average transmittance in the 400–1100 nm wavelength range was above 88 %. The optimized ITO films with Lightly and heavily doped ratio are appropriately chosen as front and back electrode of silicon heterojunction solar cells respectively, and the conversion efficiency of more than 24 % were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Thin-Film Transistor Technologies · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. 25.11\ % efficiency silicon heterojunction solar cell with low deposition rate intrinsic amorphous silicon buffer layers10.1016/j.solmat.2020.110643 ↗
2. Characterization of transparent conductive oxide films and their effect on amorphous/crystalline silicon heterojunction solar cells10.7567/JJAP.56.04CS09 ↗
3. Structural, electrical and optical properties of highly crystalline indium tin oxide films fabricated by RPD at room temperature10.1016/j.matlet.2016.06.084 ↗
4. Effect of residual water vapor on the performance of indium tin oxide film and silicon heterojunction solar cell10.1016/j.solener.2020.04.086 ↗
5. Effect on the reduction of the barrier height in rear-emitter silicon heterojunction solar cells using Ar plasma-treated ITO film10.1016/j.cap.2019.09.009 ↗
6. The effects of various annealing regimes on the microstructure and physical properties of ITO (In2O3:Sn) thin films deposited by electron beam evaporation for solar energy applications10.1016/j.renene.2010.09.005 ↗
7. Electrical, structural, and optical properties of ITO thin films prepared at room temperature by pulsed laser deposition10.1016/j.apsusc.2005.07.134 ↗
8. High mobility transparent conducting oxides for thin film solar cells10.1016/j.tsf.2009.09.044 ↗
9. Correlation between structural and optoelectronic properties of tin doped indium oxide thin films10.1016/j.ijleo.2016.10.028 ↗
10. Characterisation and optimisation of indium tin oxide films deposited by pulsed DC magnetron sputtering for heterojunction silicon wafer solar cell applications10.1016/j.egypro.2013.05.044 ↗
11. Influence of oxygen concentration on the performance of ultra-thin RF magnetron sputter deposited indium tin oxide films as a top electrode for photovoltaic devices10.3390/ma9010063 ↗
12. The effects of film thickness on the electrical, optical, and structural properties of cylindrical, rotating, magnetron-sputtered ITO films10.1016/j.apsusc.2018.01.318 ↗
13. Highly transparent RF magnetron-sputtered indium tin oxide films for a-Si:H/c-Si heterojunction solar cells amorphous/crystalline silicon10.1016/j.mssp.2014.02.044 ↗
14. Optical, microstructural and vibrational properties of sol–gel ITO films10.1016/j.optmat.2021.110999 ↗
15. Low temperature deposition of ITO thin films by ion beam sputtering10.1016/S0040-6090(00)01388-2 ↗
16. A statistical parameter study of indium tin oxide thin films deposited by radio-frequency sputtering10.1016/j.tsf.2004.09.011 ↗
17. Stability and microstructure of indium tin oxynitride thin films10.1111/j.1551-2916.2011.04845.x ↗
18. Structure, optical, and electrical properties of indium tin oxide thin films prepared by sputtering at room temperature and annealed in air or nitrogen10.1063/1.2715539 ↗
19. Preparation of conducting and transparent thin-films of tin-doped indium oxide by magnetron sputtering10.1063/1.91829 ↗
20. Optimisation of indium tin oxide thin films for photovoltaic applications10.1016/0040-6090(95)06873-2 ↗
21. Optimization of sputtered ITO films with respect to the oxygen partial pressure and substrate temperature10.1016/S0040-6090(96)09167-5 ↗
22. Transparent conducting oxide layers for thin film silicon solar cells10.1016/j.tsf.2010.03.104 ↗
23. Influence of TCO and a-Si:H doping on SHJ contact resistivity10.1109/JPHOTOV.2021.3051206 ↗