Passive daytime radiative cooling inorganic-polymeric composite artificial lawn for the alternative to the natural lawn
Source abstract
Abstract
Abstract The natural lawn needs complex maintenance (e.g., fertilizer dressing, manicuring, soil disinfection and disinsection), so the artificial lawn is increasingly desired and applied in the sports arena. However, the most artificial lawns are made of the organic materials, which could accumulate the thermal energy under direct sunlight. The accumulated thermal energy also leads to increasing the temperature of the artificial lawn and its surroundings, which eventually impact the athletic experience. Moreover, an efficient, eco-friendly, and economical technique that can provide the cooling for the artificial lawns without extensive energy input is lacking. Herein, a novel inorganic-polymeric composite for preparing passive daytime radiative cooling artificial lawn using chromium oxide (Cr2O3) particle-embedded high-density polyethylene (HDPE) is demonstrated. By reflecting 50% NIR irradiance and radiating heat through the atmosphere’s long-wave infrared transmission window (LWIR, eLWIR = 0.86), this composite-covered device displayed a temperature of 30.7 °C, much lower than those of HDPE-covered device (43.4 °C) under solar simulator (intensity~0.34 W/cm2). Similarly, this composite exhibits a better cooling effect than the neat HDPE under direct sunlight. Moreover, for further improving the cooling property of the composite, the titanium dioxide (TiO2) was utilized to enhance the reflectance of the HDPE/Cr2O3 composite without affecting the visual effect and thermal emissivity, where the total reflectance increases by 5%. Meanwhile, the outdoor thermal measurement showed that the cooling effect of the HDPE/Cr2O3/TiO2 composite artificial lawn is on a par with that of the natural lawn.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thermal Radiation and Cooling Technologies · Urban Heat Island Mitigation · Optical properties and cooling technologies in crystalline materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Artificial lawns: Environmental and societal considerations of an ecological simulacrum10.1016/j.ufug.2018.02.002 ↗
2. Determination of solar optical properties of transparent polymer films using UV/vis spectroscopy10.1016/j.solmat.2010.01.012 ↗
3. Modeling the bidirectional reflectance distribution function of mixed finite plant canopies and soil10.1029/94JD00481 ↗
4. Study on evaporative cooling effect of roof lawn gardens10.1016/S0378-7788(00)00134-1 ↗
5. Investigation of thermal benefits of rooftop garden in the tropical environment10.1016/S0360-1323(02)00066-5 ↗
6. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling10.1126/science.aat9513 ↗
7. Construction of a binary channel efficient cooling composites with reflective and phase-change properties10.1016/j.compositesb.2019.107517 ↗
8. A review on phase change energy storage: Materials and applications10.1016/j.enconman.2003.09.015 ↗
9. Thermal cycling test of few selected inorganic and organic phase change materials10.1016/j.renene.2008.02.026 ↗
10. Performance investigation of the capric and lauric acid mixture as latent heat energy storage for a cooling system10.1016/S0038-092X(01)00101-3 ↗
11. Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices10.1021/acsami.9b06198 ↗
12. Polyethylene/paraffin binary composites for phase change material energy storage in building: a morphology, thermal properties, and paraffin leakage study10.1016/j.solmat.2015.01.010 ↗
13. Preparation and thermal properties of Fatty acid/Diatomite formstable composite phase change material for thermal energy storage10.1016/j.solmat.2018.01.032 ↗
14. The effects of particle size distribution on the optical properties of titanium dioxide rutile pigments and their applications in cool non-white coatings10.1016/j.solmat.2014.06.035 ↗
15. Surface coatings for radiative cooling applications: Silicon dioxide and silicon nitride made by reactive rf-sputtering10.1016/0165-1633(85)90001-2 ↗
16. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling10.1126/science.aai7899 ↗
17. A subambient open roof surface under the mid-summer sun10.1002/advs.201500119 ↗
18. Passive radiative cooling below ambient air temperature under direct sunlight10.1038/nature13883 ↗
19. Radiative human body cooling by nanoporous polyethylene textile10.1126/science.aaf5471 ↗
20. A novel perspective for reflective cooling composites: influence of the difference between the effective refractive index of polymeric matrix and inorganic functional particles10.1016/j.conbuildmat.2019.07.226 ↗
21. A novel cool material: ASA (acrylonitrile-styrene-acrylate) matrix composites with solar reflective inorganic particles10.1016/j.compscitech.2017.04.007 ↗
22. Time-resolved spectroscopy of chlorophyll-a like electron acceptor in the reaction center complex of the green sulfur bacterium chlorobium tepidum10.1093/oxfordjournals.pcp.a029483 ↗
23. Spectrally selective nanocomposite textile for outdoor personal cooling10.1002/adma.201802152 ↗
24. Optical properties of chromium oxide thin films deposited by electron-beam evaporation10.1016/j.optmat.2005.11.020 ↗
25. Hydrophobic surface modification of TiO2 nanoparticles for production of acrylonitrile-styrene-acrylate terpolymer/TiO2 composited cool materials10.1016/j.apsusc.2017.04.234 ↗
26. Spectral signatures of hydrated proton vibrations in water clusters10.1126/science.1113094 ↗
27. Effect of Er doping on optical band gap energy of TiO2 thin films prepared by spin coating10.1016/j.cap.2013.03.025 ↗
28. Structural and optical characterization of Cr2O3 nanostructures: Evaluation of its dielectric properties10.1063/1.4867012 ↗
29. Preparation and structural, optical studies of Al substituted chromium oxide (Cr2O3) nanoparticles10.1016/j.vacuum.2018.09.033 ↗
30. Bohren · 1983