journal article·2020-12

Dynamic corrosion behavior of 316L stainless steel in quaternary nitrate-nitrite salts under different flow rates

Lina Ma, Cancan Zhang, Yuting Wu, Yuanwei Lu, Chongfang Ma

Publisher page

Abstract

Abstract Nitrate salts have been applied as heat transfer and heat storage medium in the Concentrating Solar Power (CSP) plants. Corrosion is critical to the long-time safe operation of the CSP system. This experimental study was conducted to research the dynamic corrosion behaviors of 316 L stainless steel in high-temperature quaternary nitrate nitrite mixture. The effects of corrosion on 316 L stainless steel were investigated under the varied flow rates of 0.6 m/s, 1.3 m/s and 2 m/s with 565 °C constant temperature for 1000 h. The results showed that oxidation corrosion occurred in 316 L stainless steel at all working conditions. The dynamic corrosion curves were parabolic, and the value corrosion weight loss (mmass) increased with the increase of the flow rate. Meantime, when the products flow rates were 0.6 m/s, 1.3 m/s and 2 m/s, the values of mmass were 3.6 mg cm−2, 3.77 mg cm−2 and 4.36 mg cm−2. The values of corrosion depth (Rdepths) were 0.039 mm/a, 0.041 mm/a and 0.048 mm/a, respectively. Besides, the corrosion products were consisted of hematite (Fe2O3), magnetite (Fe3O4), trace amounts of MgFe2O4 and NaFeO2 with the structure of lamellar. Furthermore, the corrosion products gradually transformed into FeCr2O4 with structures of dense and massive, and the increase of the flow rate deepened the degree of corrosion, but it had little effect on the types of corrosion products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanofluid Flow and Heat Transfer · Phase Change Materials Research · Solar Thermal and Photovoltaic Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Glatzmaer · 2011
2. Bradshaw · 2008
3. The thermal stability of molten nitrite/nitrates salt for solar thermal energy storage in different atmospheres10.1016/j.solener.2012.05.025 ↗
4. Experimental study on the thermal stability of a new molten salt with low melting point for thermal energy storage applications10.1016/j.solmat.2017.12.001 ↗
5. Novel low melting point binary nitrates for thermal energy storage applications10.1016/j.solmat.2017.02.021 ↗
6. Preparation and thermal properties of quaternary mixed nitrate with low melting point10.1016/j.solmat.2014.03.056 ↗
7. Experimental study of thermophysical properties and thermal stability of quaternary nitrate molten salts for thermal energy storage10.1016/j.solmat.2018.10.013 ↗
8. Thermal property characterization of a low melting-temperature ternary nitrate salt mixture for thermal energy storage systems10.1016/j.solmat.2011.07.029 ↗
9. The potential role of concentrated solar power (CSP) in Africa and Europe—a dynamic assessment of technology development, cost development and life cycle inventories until 205010.1016/j.enpol.2010.09.026 ↗
10. High-temperature corrosion performance of austenitic stainless steels type AISI 316L and AISI 321H, in molten Solar Salt10.1016/j.solener.2018.11.019 ↗
11. 316L stainless steel corrosion in molten salts NaNO3-KNO3-NaNO2 simulating storage conditions
12. Corrosion resistance of stainless steels during thermal cycling in alkali nitrate molten salts
13. Corrosion Resistances of 304,316L and 321 austenite stainlesssteel in nitrate molten salt
14. Corrosion of materials for molten salt reactor
15. Corrosion behavior of In625 alloy and 316L stainless steel in NaCl-CaCl2-MgCl2 ternary eutectic molten salt
16. Corrosion resistance of 310S and 316L austenitic stainless steel in a quaternary molten salt for concentrating solar power10.1016/j.egypro.2017.12.781 ↗
17. Corrosion behavior and mechanism of austenitic stainless steels in a new quaternary molten salt for concentrating solar power10.1016/j.solmat.2019.01.024 ↗
18. Study on corrosion of mixed molten salt at low melting point
19. Influence of velocity on corrosion of copper in alkaline chloride solution10.5006/1.3294336 ↗
20. Erosion-corrosion of 2205 duplex stainless steel in flowing seawater containing sand particles10.1016/j.corsci.2006.08.023 ↗
21. Effect of impact angle on the slurry erosion-corrosion of 304L stainless steel10.1016/S0043-1648(00)00344-6 ↗
22. The corrosion of carbon steel in oil-in water emulsions under controlled hydrodynamic condition10.1016/S0010-938X(99)00068-2 ↗
23. Molten sodium nitrite-potassium nitrite eutectic: the reactions of some compounds of chromium10.1016/S0020-1693(00)92574-X ↗
24. Corrosion of iron stainless steels in molten nitrate salt10.1016/j.egypro.2014.03.095 ↗
25. Tortorelli · 1989
26. Corrosion of iron base alloys and high alloy steels in the Li2CO3-K2CO3 eutectic mixture10.1016/S0010-938X(97)00020-6 ↗
27. Corrosion of mild steel in molten sodium nitrate-potassium nitrate eutectic10.1179/bcj.1976.11.1.44 ↗
28. A reversible oxygen electrode in an equimolar KNO3 - NaNO3 melt saturated with sodium peroxide II. A voltammetric study10.1016/0013-4686(76)85062-1 ↗
29. Research progress of molten nitrate salts with application to solar energy utilization
30. The corrosion of nickel under cathodic polarization in molten Na NO310.1016/0010-938X(92)90034-Z ↗
31. Solubility and detection of water in the (Na, K)NO3 eutectic melt10.1016/S0022-0728(70)80118-8 ↗