journal article·2017-03Open access

Effect of atmospheric transmittance on performance of adaptive SPD-vacuum switchable glazing

Aritra Ghosh, Brian Norton, Aidan Duffy

Abstract

Combined suspended particle device (SPD)-vacuum glazing is a potential adaptive glazing for low energy building application. Glazing transmission is an essential parameter to determine indoor comfort level of building due to glazing. In this work, above 0.5 clearness index, a strong correlation between glazing transmission and clearness index (Atmospheric transmission) has been evaluated for south facing vertical plane glazing. Below 0.5 clearness index, isotropic diffuse transmittance was dominant and one single value of glazing transmission was found which is suitable for building energy calculation throughout the year. Below 0.5 clearness index, for south facing vertical plane SPD-vacuum glazing transmission was 17% and 1.1% for transparent and opaque states respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Urban Heat Island Mitigation · Building Energy and Comfort Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Roadmap 2050 Volume 1: Technical and EconomicAnalysis, accessed online in May 2016 at〈http://www.roadmap2050.eu/attachments/files/Volume1_ExecutiveSummary.pdf〉
2. Energy Performance of Buildings Directive recast2010/31/EU 2010.〈〉.
3. Optimal control and performance of photovoltachromic switchable glazing for building integration in temperate climates10.1016/j.apenergy.2016.06.107 ↗
4. The optimal thermo-optical properties and energy saving potential of adaptive glazing technologies10.1016/j.apenergy.2015.05.065 ↗
5. Materials for intelligent sun protecting glazing10.1016/S0927-0248(99)00087-2 ↗
6. Solar energy materials for glazing technologies10.1016/j.solmat.2015.09.040 ↗
7. Properties, requirements, and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
8. Fenestration of today and tomorrow: a state-of-the-art review and future research opportunities10.1016/j.solmat.2011.08.010 ↗
9. Towards large-area photovoltaic nanocells: experiences learned from smart window technology10.1016/0165-1633(84)90024-8 ↗
10. Smart switchable glazing for solar energy and daylight control10.1016/S0927-0248(97)00279-1 ↗
11. Electrochromic device with a redox electrolyte10.1016/j.solmat.2009.02.009 ↗
12. Modelling and electro-optical testing of suspended particle devices10.1016/j.solmat.2008.06.018 ↗
13. Toward a quantitative model for suspended particle devices: optical scattering and absorption coefficients10.1016/j.solmat.2012.12.012 ↗
14. Simulation of the thickness dependence of the optical properties of suspended particle devices10.1016/j.solmat.2015.05.044 ↗
15. Measured overall heat transfer coefficient of a suspended particle device switchable glazing10.1016/j.apenergy.2015.09.019 ↗
16. High-efficiency multistable switchable glazing using smectic A liquid crystals10.1016/j.solmat.2008.10.023 ↗
17. Chromogenic smart materials10.1016/S1369-7021(04)00123-3 ↗
18. Thermal and visual performance of real and theoretical thermochromic glazing solutions for office buildings10.1016/j.solmat.2016.01.008 ↗
19. The effect of variation in the transition hysteresis width and gradient in thermochromic glazing systems10.1016/j.solmat.2015.04.022 ↗
20. Solar control with thermotropic layers10.1016/j.solener.2004.12.009 ↗
21. Thermotropic glazings for overheating protection10.1016/j.egypro.2012.11.056 ↗
22. Thermo-physical behaviour and energy performance assessment of PCM glazing system configurations: a numerical analysis10.1016/j.foar.2012.10.002 ↗
23. Spectral and angular solar properties of a PCM-filled double glazing unit10.1016/j.enbuild.2014.11.019 ↗
24. Experimental analysis of the energy performance of a full-scale PCM glazing prototype10.1016/j.solener.2013.12.002 ↗
25. Improving thermal comfort conditions by means of PCM glazing systems10.1016/j.enbuild.2013.01.029 ↗
26. Stability of gasochromic WO3 films10.1016/S0927-0248(00)00006-4 ↗
27. Gasochromic smart window: optical and thermal properties, energy simulation and feasibility analysis10.1016/j.solmat.2015.09.029 ↗
28. Experimental performance evaluation of aerogel glazing systems10.1016/j.apenergy.2011.12.055 ↗
29. Super insulating aerogel glazing10.1016/j.solmat.2005.01.016 ↗
30. Indium alloy-sealed vacuum glazing development and context10.1016/j.rser.2014.05.029 ↗
31. Development of electrochromic evacuated advanced glazing10.1016/j.enbuild.2006.03.029 ↗
32. First outdoor characterisation of a PV powered suspended particle device switchable glazing10.1016/j.solmat.2016.05.013 ↗
33. Behaviour of a SPD switchable glazing in an outdoor test cell with heat removal under varying weather conditions10.1016/j.apenergy.2016.08.029 ↗
34. Daylighting performance and glare calculation of a suspended particle device switchable glazing10.1016/j.solener.2016.02.051 ↗
35. Measured thermal & daylight performance of an evacuated glazing using an outdoor test cell10.1016/j.apenergy.2016.05.118 ↗
36. Measured thermal performance of a combined suspended particle switchable device evacuated glazing10.1016/j.apenergy.2016.02.031 ↗
37. Variation of insolation transmission with glazing plane position and sky conditions10.1115/1.1563630 ↗
38. Transmission of diffuse radiation through CPC and flat-plate collector glazings10.1016/0038-092X(80)90320-5 ↗