Effect of cavity surface material on the concentrated solar flux distribution for an impinging receiver
Source abstract
Abstract
In this paper, the effects of cavity surface materials on the radiative flux distribution of solar cavity receivers have been studied with the help of a ray-tracing methodology. Three metallic substrate materials (Inconel 600, austenitic stainless steel 253 MA and Kanthal APM) and two coating materials (Pyromark ® 2500 coating and YSZ TBC coating) were selected as the candidate cavity surface materials. The results show that the flux distribution and the total optical efficiency are much more sensitive to the absorptivity on the cylindrical surface than on the bottom. By using high absorptivity coating on the cylindrical surface and low absorptivity coating on the bottom, the radiative flux on the bottom can be controlled at a low level, and it can help to reduce the cavity length for an impinging receiver with jets on the cylindrical surface. Furthermore, the radiative flux distribution on the cylindrical surface can also be tailored to meet various design requirements by applying different coating designs on the cylindrical surface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solar Thermal and Photovoltaic Systems · Heat Transfer Mechanisms · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Solar-Hybrid Gas turbine-based power tower systems (REFOS)10.1115/1.1445444 ↗
2. Solar-thermal power generation10.1615/AnnualRevHeatTransfer.2012004925 ↗
3. Test and evaluation of a solar powered gas turbine system10.1016/j.solener.2005.04.020 ↗
4. A solar-driven combined cycle power plant10.1016/S0038-092X(97)00107-2 ↗
5. Gas turbine “solarization”-modifications for solar/fuel hybrid operation10.1115/1.1763602 ↗
6. Thermal performance prediction of a solar hybrid gas turbine10.1016/j.solener.2012.04.014 ↗
7. Innovative solar augmentation of gas turbine combined cycle plants10.1016/j.applthermaleng.2013.12.002 ↗
8. Thermodynamic modeling of a hybrid solar gas-turbine power plant10.1016/j.enconman.2015.01.027 ↗
9. Heat transfer analysis of a novel pressurized air receiver for concentrated solar power via combined cycles10.1115/1.4001259 ↗
10. Integrated design of a hybrid gas turbine-receiver unit for a solar dish system10.1016/j.egypro.2015.03.067 ↗
11. An inverse design method for a cavity receiver used in solar dish Brayton system10.1016/j.solener.2014.10.019 ↗
12. Conjugate heat transfer analysis of an impinging receiver design for a dish-Brayton system10.1016/j.solener.2015.07.013 ↗
13. The effect of the cooling nozzle arrangement to the thermal performance of a solar impinging receiver10.1016/j.solener.2016.02.052 ↗
14. Thermal performance of solar concentrator/cavity receiver systems10.1016/0038-092X(85)90170-7 ↗
15. Radiation performance of dish solar concentrator/cavity receiver systems10.1016/j.solener.2007.06.005 ↗
16. Study on the radiation flux and temperature distributions of the concentrator–receiver system in a solar dish/Stirling power facility10.1016/j.applthermaleng.2011.02.023 ↗
17. A cone concentrator for high-temperature solar cavity-receivers10.1016/S0038-092X(98)00119-4 ↗
18. Heat transfer in a solar cavity receiver: design considerations10.1080/10407782.2012.703471 ↗
19. Influence of receiver surface spectral selectivity on the solar-to-electric efficiency of a solar tower power plant10.1016/j.solener.2016.02.008 ↗
20. Detailed performance analysis of a 10-kW dish/Stirling system10.1115/1.2807191 ↗
21. Overview on advanced thermal barrier coatings10.1016/j.surfcoat.2010.08.151 ↗
22. Thermal barrier coatings technology: critical review, progress update, remaining challenges and prospects10.1179/1743280413Y.0000000019 ↗
23. Pawlowski · 2008
24. Analysis of thermal radiation effects on temperatures in turbine engine thermal barrier coatings10.1016/S0921-5093(97)00845-9 ↗
25. Optical properties of plasma-sprayed ZrO2-Y2O3 at High Temperature for Solar Applications10.1115/1.556275 ↗
26. C.E.Kennedy, Review of mid- to high- temperature solar selective absorber materials, NREL/ TP-520-31267, Golden, Colorado, 2002.10.2172/15000706 ↗
27. Special Metals Corp., INCONEL alloy 600, 〈Http://www.specialmetals.com/alloys〉. (2016).
28. Thermal radiative properties: metallic elements and alloy
29. Sandvik AB, Sandvik 253 MA tube and pipe, seamless, 〈Http://smt.sandvik.com/en/materials-Center/material-Datasheets/tube-and-Pipe-Seamless/sandvik-253-Ma/〉, 2016.
30. Kanthal AB, Kanthal APM 〈Http://www.kanthal.com/en/products/material-Datasheets/tube/kanthal-Apm/〉, 2016.
31. LA-CO® Industries, Product data: Pyromark° 2500 flat black, 〈Http://www.tempil.com/specialty-Coatings/pyromark-High-Temperature-Paint/〉. (2016).