Process and composition dependence of optical properties of zirconium, hafnium and tantalum borides for solar receiver applications
Source abstract
Abstract
Ultra-high temperature boride ceramics have proved to show promising properties for novel solar receivers. The present work shows a further step towards their actual application, investigating how sintering technique and starting powders composition affect the properties of final materials. Thus we report on the comparative characterization of ZrB2, HIB2 and TaB2 produced by high pressure and pressureless techniques and with different aniounts of MoSi2 sintering aid. We investigate micro structural, mechanical and optical properties, in the perspective to assess the material potential for novel solar absorbers operating at higher temperatures than those currently available. Moreover, a systematic study has been carried out on ZrB2, producing with fixed high pressure sintering technique, a series of samples with MoSi2 compositions in the range 5-50 vol%. We show that the content of silicide and silicide-related secondary phases in the final pellets affects either the mechanical performance and the optical behavior. Thus, as far as the optical properties are concerned, the MoSi2 amount should be the lowest as possible to ensure a proper material consolidation whilst enhancing the absorbance/spectral selectivity. (C) 2016 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Thermal properties of materials · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. 2014
2. UHTCs: ultra-high temperature ceramic materials for extreme enviroment application10.1149/2.F04074IF ↗
3. Opportunities for advanced ceramics and composites in the nuclear sector10.1111/jace.12406 ↗
4. Nuclear applications for ultra-high temperature ceramics and MAX phases
5. Material property requirements for analysis and design of UHTC components in hypersonic applications10.1016/j.jeurceramsoc.2010.01.026 ↗
6. R. Loehman, E. Corral, H.P. Dumm, P. Kotula, R. Tandon, Ultra High Temperature Ceramics For Hypersonic Vehicle Applications, Sandia National Laboratories Albuquerque, New Mexico, 87185 and Livermore, California 94550, report no. SAND2006–2925, 2006.
7. Thermal shock resistance of ultra-high-temperature ceramics under aerodynamic thermal environments10.2514/1.J051750 ↗
8. UHTC Composites for hypersonic applications
9. C.E. Kennedy, Review of mid- to high-temperature solar selective absorber materials, Technical Report No. NREL/TP-520-31267.
10. Ultra-refractory ceramics for high-temperature solar absorbers10.1016/j.scriptamat.2011.07.033 ↗
11. Hafnium and tantalum carbides for high temperature solar receivers10.1063/1.3662099 ↗
12. Spectrally selective ultra-high temperature ceramic absorbers for high-temperature solar plants10.1063/1.4717515 ↗
13. Ultra-High Temperature Ceramics for solar receivers: spectral and high-temperature emittance characterization10.2971/jeos.2012.12052 ↗
14. Suitability of ultra-refractory diboride ceramics as absorbers for solar energy applications10.1016/j.solmat.2012.10.004 ↗
15. Porous and dense hafnium and zirconium ultra-high temperature ceramics for solar receivers10.1016/j.optmat.2013.08.020 ↗
16. Optical properties of boride ultrahigh-temperature ceramics for solar thermal absorbers10.1117/1.JPE.4.045599 ↗
17. Tantalum diboride-based ceramics for bulk solar absorbers10.1016/j.solmat.2014.07.012 ↗
18. Femtosecond laser treatments to tailor the optical properties of hafnium carbide for solar applications10.1016/j.solmat.2014.09.037 ↗
19. Optical properties of ZrB2 porous architectures10.1016/j.solmat.2015.09.068 ↗
20. Optical properties of dense zirconium and tantalum diborides for solar thermal absorbers10.1016/j.renene.2016.01.068 ↗
21. Concentrating solar thermal power and thermochemical fuels10.1039/c2ee21275g ↗
22. Porous materials as open volumetric solar receivers: experimental determination of thermophysical and heat transfer properties10.1016/S0360-5442(03)00188-9 ↗
23. Evaluation of porous silicon carbide monolithic honeycombs as volumetric receivers/collectors of concentrated solar radiation10.1016/j.solmat.2006.10.021 ↗
24. The “porcupine”: a novel high-flux absorber for volumetric solar receivers10.1115/1.2888060 ↗
25. Sintering and densification mechanisms of ultra-high temperature ceramics
26. Transmission electron microscopy on Zr- and Hf-borides with MoSi2 addition: densification mechanisms10.1557/JMR.2010.0126 ↗
27. Fabrication and properties of HfB2–MoSi2 composites produced by hot pressing and spark plasma sintering10.1557/jmr.2006.0180 ↗
28. Thermal conductivity of ZrB2 and HfB2
29. Mechanical, tribological, and thermal properties of hot-pressed ZrB2-B4C composite10.1111/ijac.12290 ↗
30. Thermal properties of La2O3-doped ZrB2- and HfB2-based ultra-high temperature ceramics10.1016/j.jeurceramsoc.2013.06.009 ↗
31. Mechanical properties of zirconium-diboride based UHTCs
32. C.M. Carney, T.S. Key, Comparison of the oxidation protection of HfB2 based ultra-high temperature ceramics by the addition of SiC or MoSi2, in: W.M. Kriven, D. Zhu, et al. (Eds.), Developments in Strategic Materials and Computational Design V (Ceramics Engineering and Science Proceedings) vol. 35 (8), 2014, pp. 261.10.1002/9781119040293.ch23 ↗
33. Effect of La2O3 addition on long-term oxidation kinetics of ZrB2–SiC and HfB2–SiC ultra-high temperature ceramics10.1016/j.jeurceramsoc.2014.06.004 ↗
34. Compositional dependence of optical properties of zirconium, hafnium and tantalum carbides for solar absorber applications10.1016/j.solener.2016.02.045 ↗
35. TaB2-based ceramics: microstructure, mechanical properties and oxidation resistance10.1016/j.jeurceramsoc.2011.07.032 ↗
36. Sintering behavior, microstructure, and mechanical properties: a comparison among pressureless sintered ultra-refractory carbides10.1155/2010/835018 ↗
37. Bohren · 1983 · 243
38. Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface, Active Standard ASTM G173, ASTM G173–03, 2012.