Simultaneous improvement in efficiency and transmittance of low bandgap semitransparent polymer solar cells with one-dimensional photonic crystals
Source abstract
Abstract
Abstract One-dimensional photonic crystals (1DPCs) with the structure of (WO 3 /LiF) N are employed to simultaneously improve the efficiency and transmittance of low bandgap semitransparent polymer solar cells(PSCs). Within the photonic bandgap(PBG) of 580–780 nm, 1DPCs with 8 pairs of WO 3 /LiF act as distributed reflectors (DBR), which reflects light wavelength of 580–780 nm back into the PSCs for reabsorption by active layers. Power conversion efficiency (PCE) of 2.46% is obtained for the semitransparent PSCs and there is an improvement of 28.1% in the PCE when compared with that of the device without 1DPCs. Within the photonic passband of 380–580 nm, the 1DPCs act as antireflection coatings. An average transmittance of 40% is remained within the wavelength range and the value is improved by 33% when compared with that of the device without the 1DPCs. Finally, it is demonstrated that the efficiency and transmittance of the device are dependent on the number of the repeated period ( N ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · solar cell performance optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
2. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
3. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
4. Polymer solar cells10.1038/nphoton.2012.11 ↗
5. Stretchable organic solar cells10.1002/adma.201004426 ↗
6. Photonic color filters integrated with organic solar cells for energy harvesting10.1021/nn201767e ↗
7. Nanofluid-based optical filter optimization for PV/T systems10.1038/lsa.2012.34 ↗
8. Semitransparent organic photovoltaic cells with laminated top electrode10.1021/nl903892x ↗
9. Polarizing organic photovoltaics10.1002/adma.201101514 ↗
10. Semitransparent inverted polymer solar cells using MoO3/Ag/WO3 as highly transparent anodes10.1016/j.solmat.2010.11.009 ↗
11. Zhou · Solar Energy Materials and Solar Cells · 2009 · 93 · 49710.1016/j.solmat.2008.11.002 ↗
12. Semitransparent polymer solar cells using V2O5/Ag/V2O5 as transparent anodes10.1016/j.orgel.2011.03.036 ↗
13. Semitransparent inverted polymer solar cells using MoO3/Ag/V2O5 as transparent anodes10.1016/j.solmat.2011.09.004 ↗
14. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
15. Short-circuit current density improvement of inverted polymer solar cells using PbPc to enhance photon absorption over 600nm10.1016/j.solmat.2010.08.017 ↗
16. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
17. Silicon atom substitution enhances interchain packing in a thiophene-based polymer system10.1002/adma.200902469 ↗
18. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
19. Ellipsometric determination of permittivity in a negative index photonic crystal metamaterial10.1038/lsa.2012.42 ↗
20. Radiation damping optical enhancement in cold atoms10.1038/lsa.2013.10 ↗
21. Spectral selectivity in infrared thermal detection10.1038/lsa.2012.24 ↗
22. Photonic crystal geometry for organic solar cells10.1021/nl901232p ↗
23. Optimizing one-dimensional photonic-crystals based semitransparent organic solar cells by tailoring reflection phase shift within photonic bandgap10.1063/1.3631675 ↗
24. Semitransparent polymer solar cells with one-dimensional (WO3/LiF)N photonic crystals10.1063/1.4760229 ↗
25. Effects of metal electrode reflection and layer thicknesses on the performance of inverted organic solar cells10.1016/j.solmat.2009.12.017 ↗
26. Performance improvement of TiO2/P3HT solar cells using CuPc as a sensitizer10.1063/1.2884270 ↗
27. Photonic crystals: putting a new twist on light10.1038/386143a0 ↗
28. Omnidirectional reflection from a one-dimensional photonic crystal10.1364/OL.23.001573 ↗
29. Analytic expressions for the electromagnetic mode density in finite, one-dimensional, photonic band-gap structures10.1103/PhysRevE.53.4107 ↗
30. Low bandgap polymers for photon harvesting in bulk heterojunction solar cells10.1039/b306630d ↗
31. Joannopoulos · 2008