Structural, optical and electrical properties of low-temperature deposition Cu(InxGa1−x)Se2 thin films
Source abstract
Abstract
Abstract In this paper, we study the structural, optical and electrical properties of polycrystalline Cu(In, Ga)Se 2 (CIGS) thin films fabricated by the three-stage co-evaporation process on glass substrate at low substrate temperature ( T Sub ). The structural, optical and electrical properties of the as-grown CIGS films have been investigated by X-ray diffraction spectra, transmittance and reflectance spectra, scanning electron microscope and temperature dependent Hall Effect measurement. The results reveal that the properties of the CIGS film deposited at low temperature strongly depend on the chemical composition. A CIGS solar cell with competitive conversion efficiency of 13.2% without anti-reflection layer using low-temperature process at T Sub of 450 °C has been demonstrated. Our results suggest that the CIGS absorber for high efficiency solar cells via the low T Sub process has a relatively narrow compositional ratio compared to the high T Sub process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
2. M. Powalla, M. Cemernjak, J. Eberhardt, F. Kessler, R. Kniese, H.D. Mohring, B. Dimmler, Large-area CIGS modules: pilot line production and new developments, Solar Energy Materials and Solar Cells, 90 (2006) 3158–3164.10.1016/j.solmat.2006.06.052 ↗
3. Characterisation of Cu(In, Ga)Se2-based thin film solar cells on polyimide10.1016/j.tsf.2008.10.132 ↗
4. Sodium co-evaporation for low temperature Cu(In, Ga)Se2 deposition10.1016/S0040-6090(00)01712-0 ↗
5. Effect of substrate temperature and deposition profile on evaporated Cu(In, Ga)Se2 films and devices
6. Growth of Cu(In, Ga)Se2 thin films by coevaporation using alkaline precursors
7. W.N. Shafarman, R.W. Birkmire, S. Marsillac, Effect of reduced deposition temperature, time, and thickness on Cu(In, Ga)Se2 films and devices, in: Proceedings of the 26th Photovoltaic Specialists Conference, Anaheim, CA, 1997, p. 331.10.1109/PVSC.1997.654095 ↗
8. Growth of Cu(In, Ga)Se2 films using a Cu-poor/rich/poor sequence substrate temperature effects10.1016/S0040-6090(03)00222-0 ↗
9. Effect of substrate temperature on the structural and electrical properties of Cu(In, Ga)Se2 thin films10.1016/j.solmat.2008.09.002 ↗
10. Diode characteristics in state-of-the-art ZnO/CdS/Cu(In1−xGax)Se2 solar cells10.1002/pip.626 ↗
11. M. Ruckh, D. Schmid, M. Kaiser, R. Schäffler, T. Walter, H.W. Schock, Influence of substrates on the electrical properties of Cu(In, Ga)Se thin films, in: Proceedings of the First World Conference on Photovoltaic Energy Conversion, New York, 1994, p. 156.10.1109/WCPEC.1994.519831 ↗
12. CuInSe2 phase formation during Cu2Se/In2Se3 interdiffusion reaction10.1063/1.372400 ↗
13. Preparation of Cu(In, Ga)Se2 thin films at low substrate temperature
14. Band-gap engineering in Cu(In, Ga)Se2 thin films grown from (In, Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
15. Defect physics of the CuInSe2 chalcopyrite semiconductor10.1103/PhysRevB.57.9642 ↗
16. Structural and optical properties of sulfur-annealed CuInS2 thin films10.1016/S0927-0248(99)00043-4 ↗
17. A method of measuring specific resistivity and Hall effect of discs of arbitrary shape
18. Compositional trends of defect energies, band alignments, and recombination mechanisms in the Cu(In, Ga)(Se,S)2 alloy system10.1016/S0040-6090(03)00225-6 ↗
19. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
20. Electron transport processes in CuIn1−xGaxSe2 films prepared by four source co-evaporation technique10.1016/S0254-0584(01)00462-X ↗
21. Direct observation of copper depletion and potential changes at copper indium gallium diselenide grain boundaries10.1063/1.1906331 ↗
22. Lux–Steiner, self-compensation of intrinsic defects in the ternary semiconductor CuGaSe210.1103/PhysRevB.69.045210 ↗
23. High quality baseline for high efficiency Cu(In1−x,Gax)Se2 solar cells10.1002/pip.757 ↗
24. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
25. W.N. Shafarman, J. Zhu, Effect of grain size, morphology and deposition temperature on Cu(In, Ga)Se2 solar cells, in: Proceedings of the Materials Research Society Symposium, vol. 668, San Francisco, US, 2001, pp. H2.3.1–H2.3.610.1557/PROC-668-H2.3 ↗