journal article·2009-10

Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane

Matjaž Koželj, Angela Šurca Vuk, Ivan Jerman, Boris Orel

Publisher page

Abstract

The formation of a protective layer from (3-mercaptopropyl)trimethoxysilane (MPTMS) on commercial Sunselect, cermet-based spectrally selective coating (Alanod, DE), was studied by non-electrochemical (infrared reflection–absorption—IR RA, X-ray photoelectron spectroscopy—XPS), electrochemical (cyclic voltammetry (CV) in the presence of a redox probe (Cd+2), and potentiodynamic (PD)) techniques. By simple immersion and subsequent dip coating of the Sunselect substrate in the MPTMS sol, the hydrolyzed MPTMS precursor was adsorbed on the substrate, forming a protective layer imparting corrosion stability to Sunselect in a salt spray chamber for at least 20 days, outperforming any other sol–gel coating used so far for the corrosion protection of Sunselect. This was attributed to the penetration of MPTMS into the porous cermet structure through the upper antireflective Sn-oxide layer, as shown from XPS depth profile. Detailed analysis of the hydrolysis and condensation reactions of the MPTMS precursor by 29Si NMR and IR spectroscopic techniques is reported. The most important finding was the observation that the applied MPTMS layer did not affect the spectral selectivity, as inferred from the solar absorptance increase of 1% and thermal emittance increase of not more than 2%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · ZnO doping and properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. FW6 EU Project, Development of unglazed solar absorbers (resorting to coloured selective coatings on steel material) for building facades, and integration into heating systems (SOLABS), 〈http://cordis.europa.eu/data/PROJ_FP5/ACTIONeqDndSESSIONeq112362005919ndDOCeq604ndTBLeqEN_PROJ.htm〉.
2. Silicone-based thickness insensitive spectrally selective (TISS) paints as selective paint coatings for coloured solar absorbers (part I)10.1016/j.solmat.2006.07.013 ↗
3. Selective paint coatings for coloured solar absorbers: polyurethane thickness insensitive spectrally selective (TISS) paints (part II)10.1016/j.solmat.2006.07.012 ↗
4. Improvements in design of solar selective thin-film absorbers10.1016/0030-4018(77)90397-2 ↗
5. Infrared properties of Pt/Al2O3 cermet films10.1103/PhysRevB.43.13838 ↗
6. Optical-properties and solar selectivity of coevaporated Co-Al2O3 composite films10.1063/1.333386 ↗
7. Selective electroplated chromium blacks10.1364/AO.17.002637 ↗
8. Ni–Al2O3 cermet solar absorbers by rf planar magnetron sputtering for high-temperature applications10.1016/0165-1633(89)90059-2 ↗
9. C.E. Kennedy, NREL/TP-520-31267, Review of mid- to high-temperature solar selective absorber materials, National Renewable Energy Laboratory, Golden, CO, 2002.10.2172/15000706 ↗
10. 1991
11. K.G.W. Reichert, Witterungsbestaendiges verbundmaterial, EP 1 867 934, 2007.
12. Titanium-containing amorphous hydrogenated silicon carbon films (a-Si: C: H/Ti) for durable solar absorber coatings10.1016/S0927-0248(00)00396-2 ↗
13. Thermal stability and moisture resistance of C/Al2O3/Al solar absorber surfaces10.1016/j.solmat.2003.12.006 ↗
14. Antireflection of glazings for solar energy applications10.1016/S0927-0248(98)00074-9 ↗
15. Industrially sputtered solar absorber surface10.1016/S0927-0248(98)00067-1 ↗
16. Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution10.1016/S0927-0248(98)00113-5 ↗
17. Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers10.1016/j.solmat.2008.04.023 ↗
18. Optimization of a solution—chemically derived solar absorbing spectrally selective surface10.1016/j.solmat.2006.07.002 ↗
19. ERDA of Ni–Al2O3/SiO2 solar thermal selective absorbers10.1016/j.solmat.2008.02.014 ↗
20. Round robin on accelerated life testing of solar absorber surface durability10.1016/S0927-0248(99)00113-0 ↗
21. Sol–gel coatings on metals10.1007/BF02436880 ↗
22. Review of alternatives to chromate for corrosion protection of aluminum aerospace alloys10.1016/S0300-9440(98)00015-0 ↗
23. Enhanced corrosion resistance of AA 2024-T3 and hot-dip galvanized steel using a mixture of bis-[triethoxysilylpropyl]tetrasulfide and bis-[trimethoxysilylpropyl]amine10.1016/j.electacta.2003.10.023 ↗
24. The formation of a protective layer of 3-mercapto-propyl-trimethoxy-silane on copper10.1016/j.corsci.2006.08.019 ↗
25. Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chloride solution, part 1: corrosion of AA 2024-T310.1016/S0010-938X(03)00060-X ↗
26. Corrosion protection of AA 2024-T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in sodium chloride solution, part 2: mechanism for corrosion protection10.1016/S0010-938X(03)00061-1 ↗
27. Analytical characterisation and corrosion behaviour of bis-[triethoxysilylpropyl]tetrasulphide pre-treated AA2024-T310.1016/j.corsci.2004.07.024 ↗
28. Corrosion studies and interfacial bonding of urea/poly(dimethylsiloxane) sol/gel hydrophobic coatings on AA 2024 aluminum alloy10.1021/la062976g ↗
29. Structural studies of sol–gel urea/polydimethylsiloxane barrier coatings and improvement of their corrosion inhibition by addition of various alkoxysilanes10.1016/j.porgcoat.2008.04.018 ↗
30. Spectroscopic and corrosion resistance characterization of amine and super acid-cured hybrid organic–inorganic thin films on 2024-T3 aluminum alloy10.1016/S0300-9440(02)00007-3 ↗
31. Silica based organic–inorganic hybrid nanocomposite coatings for corrosion protection10.1016/j.porgcoat.2005.03.009 ↗
32. Protecting metals with silane coupling agents
33. Effect of bath concentration and curing time on the structure of nonfunctional thin organosilane layers on aluminium10.1016/S0013-4686(02)00832-0 ↗
34. Effect of ph on the gelation time of hexylene-bridged polysilsesquioxanes10.1021/cm0498640 ↗
35. Nalwa · 2003 · vol. 1
36. Oligo- and polysiloxanes10.1016/j.progpolymsci.2003.08.003 ↗
37. Polyhedral oligosilsesquioxanes and their homo derivatives10.1007/3-540-11345-2_12 ↗
38. Corrosion resistance properties of ormosil coatings on 2024-T3 aluminum alloy10.1016/j.porgcoat.2004.03.001 ↗
39. Linear sweep voltammetry at very small stationary disk electrodes10.1016/0022-0728(84)80115-1 ↗
40. The effects of drying time and relative humidity on the stability of sol–gel derived silicate films in solution10.1016/S0022-0728(01)00723-9 ↗
41. Molecular recognition based on (3-mercaptopropyl) trimethoxysilane modified gold electrodes10.1016/S0022-0728(96)04715-8 ↗
42. Self-assembled monolayers on Au microelectrodes10.1016/j.elecom.2007.10.008 ↗
43. Metal acetylacetonate complexes: preparation and characterization
44. Moulder · 1995
45. Corrosion protection properties of organofunctional silanes—an overview10.1016/S1007-0214(05)70134-6 ↗
46. Pleuddemann · 1986
47. Study of the effect of different aluminium surface pretreatments on the deposition of thin non-functional silane coatings10.1002/sia.1735 ↗
48. V.C. Farmer, The anhydrous minerals, in: V.C. Farmer (Ed.), The Infrared Spectra of Minerals, Mineralogical Society, London, 1974, p. 186 (Chapter 10).10.1180/mono-4 ↗
49. Conductive SnO2/Sb powder-preparation and optical-properties10.1007/BF00543918 ↗
50. Spectrally selective SnO2-F film on glass and black enameled steel substrates—spray pyrolytical deposition and optical-properties10.1016/0927-0248(92)90130-H ↗
51. Preparation and characterization of Mo-doped and Sb/Mo-doped SnO2 sol–gel-derived films for counterelectrode applications in electrochromic devices10.1039/JM9950500617 ↗
52. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
53. Copper corrosion inhibitors. A review10.1016/S1452-3981(23)15441-1 ↗
54. Si-29-NMR study of hydrolysis and initial polycondensation processes of organoalkoxysilanes, 2. Methyltriethoxysilane10.1016/0022-3093(94)90362-X ↗
55. Functionalized organosilica microspheres via a novel emulsion-based route10.1021/la0514112 ↗
56. Vibrational spectroscopic studies of (3-mercaptopropyl)trimethoxylsilane sol-gel and its coating10.1016/j.saa.2004.11.031 ↗
57. Functionalized octa-(propylsilsesquioxanes) (3-XC(3)H(6))(8)(Si8O12)-model compounds for surface-modified silica-gels10.1016/0022-328X(94)05100-P ↗
58. Synthesis of polyhedral phenylsilsesquioxanes with KF as the source of the fluoride ion10.1039/b804224a ↗
59. Brinker · 1990
60. Oxidation of thiol compounds by molecular oxygen in aqueous solutions10.1023/A:1024761324710 ↗
61. On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings10.1016/j.elecom.2007.08.012 ↗
62. Köhl · 2004
63. Spectrally selective materials for efficient visible, solar and thermal radiation control
64. 3-mercaptopropyltrimethoxysilane as a Cu corrosion inhibitor in KCl solution10.1023/A:1004072117517 ↗
65. Impedance spectroscopy of self-assembled monolayers on Au(111): sodium ferrocyanide charge transfer at modified electrodes10.1021/la970980+ ↗
66. Scanning tunneling microscopy, Fourier transform infrared spectroscopy, and electrochemical characterization of 2-naphthalenethiol self-assembled monolayers on the Au surface: a study of bridge-mediated electron transfer in Ru(NH3)(6)(2+)vertical bar Ru(NH3)(6)(3+) redox reactions10.1021/jp052489u ↗
67. Electrochemical properties and corrosion protection of organosilane self-assembled monolayers on aluminum 2024-T310.1016/j.electacta.2005.02.147 ↗
68. Self-assembled monolayer and multilayer thin films on aluminum 2024-T3 substrates and their corrosion resistance study10.1016/j.tsf.2004.06.158 ↗
69. Characterization of extremely low defect density hexadecanethiol monolayers on Hg surfaces10.1021/la00028a028 ↗
70. Weast · 1974
71. Design of a reflection–absorption experiment for studying IR-spectrum of molecules adsorbed on a metal-surface10.1116/1.568552 ↗
72. Paints and varnishes—cross-cut test ISO 2409, 2007.