journal article·2014-01

Influence of microstructure on temperature-induced ageing mechanisms of different solar absorber coatings

M. Kotilainen, K. Mizohata, M. Honkanen, P. Vuoristo

Publisher page

Abstract

Abstract Ageing mechanisms at high temperatures were investigated for various commercially available solar thermal absorber coatings. The absorber surfaces were sputtered chromium–chromium oxide based coatings on copper, aluminium and anodized aluminium substrates, an evaporated titanium oxy-nitride coating on copper substrate and an electroplated black chromium coating on nickel coated copper. The absorbers were aged at high temperature according to ISO standard draft EN 12975-3-1 at 278 °C for 600 h. The ageing mechanisms and degradation of the absorbers were analyzed by optical measurements (solar absorptance by UV/vis/NIR spectrophotometer and thermal emittance by FTIR spectrophotometer), microstructural analysis was made by field-emission scanning electron microscope (FESEM) equipped with an energy dispersive X-ray spectrometer (EDS) and transmission electron microscope (TEM) with EDS, and composition analyzed by time-of-flight elastic recoil detection analysis (TOF-ERDA) before and after the ageing tests. The ageing and degradation of the absorber coatings were observed. The ageing mechanisms were the diffusion of substrate atoms into the coating or all the way into the coating surface and the oxidation of the chromium or the titanium in the absorber coating. The microstructure of the absorber coatings affected stability at high temperatures. Absorbers with a dense sputtered coating structure aged significantly less than more porous structured coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solar Thermal and Photovoltaic Systems · Transition Metal Oxide Nanomaterials · Photovoltaic System Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Solar thermal collectors and applications10.1016/j.pecs.2004.02.001 ↗
2. European Solar Thermal Industry Federation (ESTIF), Solar Thermal Markets in Europe – Trends and Market Statistics 2010, Available from: 〈http://www.estif.org〉 (accessed 2.11.12).
3. Preparation and characterization of black chrome solar selective coatings10.3938/jkps.51.135 ↗
4. Zr–ZrO2 cermet solar coatings designed by modelling calculations and deposited by dc magnetron sputtering10.1088/0022-3727/36/6/315 ↗
5. Study of the electrochemical synthesis of selective black coatings absorbing solar energy10.1016/S1466-6049(01)00154-4 ↗
6. Functional chromium plating10.1016/S0026-0576(00)83080-9 ↗
7. A review of recent patents on trivalent chromium plating10.2174/1874464810902010050 ↗
8. Spectrally selective composite coatings of Cr–Cr2O3 and Mo–Al2O3 for solar energy applications10.1016/S0040-6090(01)01051-3 ↗
9. Chromium-based thin sputtered composite coatings for solar thermal collectors10.1016/S0042-207X(01)00372-4 ↗
10. Graded selective coatings based on chromium and titanium oxynitride10.1016/S0040-6090(03)00967-2 ↗
11. Development of large area sputtered solar absorber coatings10.1016/S0022-3093(97)00283-4 ↗
12. Selectively solar-absorbing coatings
13. Corrosion protection of Sunselect, a spectrally selective solar absorber coating, by (3-mercaptopropyl)trimethoxysilane10.1016/j.solmat.2009.05.023 ↗
14. Preparation of solar selective absorbing coatings by magnetron sputtering from a single stainless steel target10.1016/j.tsf.2010.04.025 ↗
15. European Solar Termal Technology Platform (ESTTP), Solar heating and cooling for a sustainable energy future in Europe, Revised version, 2009, pp. 1–121.
16. Review – surfaces for selective absorption of solar energy: an annotated bibliography 1955–198110.1007/BF00540724 ↗
17. Kennedy · 2002
18. Review of physical vapor deposited (PVD) spectrally selective coatings for mid- and high-temperature solar thermal applications10.1016/j.solmat.2011.10.028 ↗
19. Preparation of chromium oxynitride and chromium nitride films by DC reactive magnetron sputtering and their material properties10.1179/147842209X12579401586807 ↗
20. New method to optimize a solar absorber graded film profile10.1016/j.solener.2004.06.010 ↗
21. Optimization of solar absorbing three-layer coatings10.1016/j.solmat.2005.03.009 ↗
22. Optimization of an industrial DC magnetron sputtering process for graded composition solar thermal absorbing layer10.1016/j.solmat.2005.03.018 ↗
23. Exergetic optimization of flat plate solar collectors10.1016/j.renene.2008.06.014 ↗
24. Flat plate thermal solar collector efficiency: transient behavior under working conditions. Part I: model description and experimental validation10.1016/j.applthermaleng.2011.04.003 ↗
25. Selectively coated high efficiency glazing for solar-thermal flat-plate collectors10.1016/j.tsf.2011.04.094 ↗
26. Advanced procedure for the assessment of the lifetime of solar absorber coatings10.1016/j.solmat.2004.01.041 ↗
27. Formation of copper silicides from Cu(100)/Si(100) and Cu(111)/Si(111) structures10.1063/1.345194 ↗
28. Tantalum as a diffusion barrier between copper and silicon10.1063/1.104051 ↗
29. Tantalum as a diffusion barrier between copper and silicon: failure mechanism and effect of nitrogen additions10.1063/1.350566 ↗
30. Characteristics of TiN barrier layer against Cu diffusion10.1016/S0040-6090(98)01074-8 ↗
31. Failure mechanism of Ta diffusion barrier between Cu and Si10.1063/1.1288692 ↗
32. TaC as a diffusion barrier between Si and Cu10.1063/1.1464652 ↗
33. Comparison of characteristics and integration of copper diffusion-barrier dielectrics10.1016/j.tsf.2005.07.059 ↗
34. Prospective development in diffusion barrier layers for copper metallization in LSI10.1016/j.mejo.2007.04.011 ↗
35. Electrical properties and recombination activity of copper, nickel and cobalt in silicon10.1007/s003390050649 ↗
36. Characterization of Ta and TaN diffusion barriers beneath Cu layers using picosecond ultrasonics10.1016/j.ultras.2006.05.097 ↗
37. Design of diffusion barriers10.1016/j.tsf.2006.11.153 ↗
38. Carlsson · 1994 · 1
39. Direct current reactive sputtering Cr–Cr2O3 cermet solar selective surfaces for solar hot water applications10.1016/j.tsf.2008.09.082 ↗
40. Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3 solar selective coatings10.1063/1.2831364 ↗
41. Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by reactive DC/RF magnetron sputtering10.1016/j.solmat.2008.06.004 ↗
42. Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high-temperature solar applications10.1016/j.solmat.2007.11.004 ↗
43. European Committee for Standardization, Draft BS EN 12975-3-1 Thermal Solar Systems and Components – Solar Collectors – Part 3-1: Qualification of Solar Absorber Surface Durability, 2011, pp. 1–34.
44. SpeedColl project, Entwicklung beschleunigter Alterungstestverfahren für solarthermische Kollektoren und deren Komponenten, Available from: 〈http://www.speedcoll.de/〉. (accessed 13.9.12).
45. F. Ruesch. Absorber coatings: Task X procedure and test results of newly developed coatings, in: Proceedings of the SME Thermal Conference, 7th February 2012, Berlin, Germany, 2012.
46. Round robin on accelerated life testing of solar absorber surface durability10.1016/S0927-0248(99)00113-0 ↗
47. Accelerated life testing of solar absorber coatings: testing procedure and results
48. Qualification test procedure for solar absorber surface durability10.1016/S0927-0248(99)00111-7 ↗
49. Köhl · 2004
50. Use of an integrating sphere in solar energy research10.1016/0927-0248(93)90033-Y ↗
51. Optical properties and measurements
52. Spectral reflectance measurements using an integrating sphere in the infrared10.1364/AO.24.001757 ↗
53. Comparison of TOF-ERDA and nuclear resonance reaction techniques for range profile measurements of keV energy implants10.1016/S0168-583X(96)00469-7 ↗
54. Ziegler · 1985
55. Optical properties and thermal stability of pulsed-sputter-deposited AlxOy/Al/AlxOy multilayer absorber coatings10.1016/j.solmat.2008.11.005 ↗
56. Optical, structural and thermal characteristics of Cu–CuAl2O4 hybrids deposited in anodic aluminum oxide as selective solar absorber10.1016/j.solmat.2010.04.075 ↗
57. Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers10.1016/j.solmat.2010.04.073 ↗
58. Characterization of black nickel solar absorber coatings electroplated in a nickel chlorine aqueous solution10.1016/S0927-0248(98)00113-5 ↗
59. Effect of density and thickness on H2-gas sensing property of sputtered SnO2 films10.1016/j.vacuum.2004.09.024 ↗
60. H2S sensing property of porous SnO2 sputtered films coated with various doping films10.1016/j.vacuum.2005.11.002 ↗
61. Microstructure and optical properties of amorphous TiO2–SiO2 composite films synthesized by helicon plasma sputtering10.1016/S0040-6090(98)01007-4 ↗
62. Characterization of SiO2 and TiO2 films prepared using rf magnetron sputtering and their application to anti-reflection coating10.1016/j.vacuum.2004.06.003 ↗
63. Thermal stability studies of sputter-deposited multilayer selective absorber coatings10.1016/0040-6090(82)90618-6 ↗
64. Adhesion and structure of rf‐sputtered magnesium oxide coatings on various metal substrates10.1116/1.573663 ↗
65. Refinement of solar absorbing black chrome microstructure and its relationship to optical degradation mechanisms10.1063/1.327475 ↗
66. Progress in nano-engineered anodic aluminum oxide membrane development10.3390/ma4030487 ↗
67. 9 – Atomistic film growth and some growth-related film properties