journal article·2014-11

Influence of iron on the performance of CIGS thin-film solar cells

R. Wuerz, A. Eicke, F. Kessler, F. Pianezzi

Publisher page

Abstract

Abstract In the last years steel foil has become an attractive candidate for use as a flexible substrate material for Cu(Inx,Ga1−x)Se2 thin-film solar cells (CIGS). It is stable at the high temperatures present during CIGS processing and is also commercially available. However, one disadvantage is the diffusion of substrate elements into the CIGS layer, which are detrimental for the performance of solar cells. We found a direct correlation between the iron (Fe) content in the CIGS layer and corresponding solar cell parameters. A deep defect related to Fe impurities could be detected by admittance spectroscopy measurements. The solar cell parameters could be well fitted by simulation with recombination at an acceptor like deep defect in the bulk of the CIGS layer. The simulated density of deep defect states correlates nicely with the Fe concentration in the CIGS layer. From this we conclude that Fe replaces an In (or Ga) site in the CIGS lattice and creates an FeIn2+ (or FeGa2+) deep acceptor state in the bulk of CIGS layers, which is detrimental already at a low concentration in the sub ppm range. The simulations enabled us to estimate the maximum Fe concentration in CIGS layers which is tolerable without disturbing the performance of high-efficiency CIGS solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Electronic properties of Cu(In,Ga)Se2 solar cells on stainless steel foils without diffusion barrier layer10.1002/pip.1247 ↗
2. Press release of global solar, Wednesday, 16 September 2009, 10:50, 〈http://www.globalsolar.com/company/media〉.
3. Powalla · IEEE J. Photovolt. · 2014 · 4 · 44010.1109/JPHOTOV.2013.2280468 ↗
4. Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%10.1002/pssr.201409040 ↗
5. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
6. P. Jackson, P. Grabitz, A. Strohm, G. Bilger, H.W. Schock, Contamination of Cu(In,Ga)Se2 solar cells by metallic substrate elements, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, Paris, France, June 7–11, 2004, pp. 1936–1938.
7. D. Güttler, A. Chirila, S. Seyrling, P. Blösch, S. Buecheler, S. Fontané, V. Izquierdo-Roca, L. Calvo-Barrio, A. Peréz-Rodriguez, J.R. Morante, A. Eicke, A.N. Tiwari, Influence of NaF incorporation during Cu(In,Ga)Se2 growth on microstructure and photovoltaic performance, in: Conference Record of the 35th IEEE Photovoltaic Specialists Conference, Honolulu, Hawai, June 20–25, 2010, pp. 3420–3424.10.1109/PVSC.2010.5614564 ↗
8. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
9. M. Hartmann, M. Schmidt, A. Jasenek, H.W. Schock, F. Kessler, K. Herz, M. Powalla, Flexible and light weight substrates for Cu(In,Ga)Se2 solar cells and modules in: Conf. Rec. of the 28th IEEE Photovoltaic Specialists Conference, Anchorage, USA, September 15–22, 2000, pp. 638–641.10.1109/PVSC.2000.915924 ↗
10. R. Wuerz, A. Eicke, F. Kessler, P. Rogin, O. Yazdani-Assl, Alternative sodium sources for Cu(In,Ga)Se2 thin-films solar cells on flexible substrates Thin Solid Films 519 (2011) 7268–7271, 10.1016j.tsf.2011.01.39910.1016/j.tsf.2011.01.399 ↗
11. CIGS thin-film solar cells on steel substrates10.1016/j.tsf.2008.11.016 ↗
12. Diffusion barriers for CIGS solar cells on metallic substrates10.1016/S0040-6090(03)00259-1 ↗
13. B. Dowon, K. Sehan, O. Joonjae, L. Joowon, K. Wookyoung, Fabrication of high efficiency flexible CIGS solar cell with ZnO diffusion barrier on stainless steel substrate, Mater. Res. Soc. Symp. Proc. 1324 (2011), 10.1557/opl.2011.96610.1557/opl.2011.966 ↗
14. Properties of Cu(In,Ga)Se2:Fe Thin Films For Solar Cells10.1557/PROC-865-F14.12 ↗
15. Influence of iron on defect concentrations and device performance for Cu(In,Ga)Se2 solar cells on stainless steel substrates10.1002/pip.2260 ↗
16. Blösch · J. Appl. Phys. · 2013 · 113 · 054506-110.1063/1.4789616 ↗
17. Electrical and optical properties of Fe-doped CuInSe210.1002/pssa.2211330235 ↗
18. Impurity States in CuInSe210.1002/crat.19810161210 ↗
19. Defect Chemistry of AIBIIICVI chalcopyrite semiconducting compounds
20. Paramagnetic defects in as-grown and iron doped CuInSe210.1088/0022-3719/15/22/013 ↗
21. Low-temperature electron-paramagnetic-resonance study of extrinsic and intrinsic defects in CuGaSe210.1103/PhysRevB.59.12268 ↗
22. Electron Paramagnetic Resonance (EPR) and light-induced EPR investigations of CuGaSe210.1016/S0040-6090(99)00781-6 ↗
23. J.R. Davis, A. Rohatgi, P. Rai-Choudhury, P. Blais, R.H. Hopkins, Impurities in Silicon Solar Cells, in: Proceedings of the 13th IEEE Photovoltaics Specialists Conference, IEEE, New York, (1978), p. 490.
24. Design of a laser-assisted tomographic atom probe at Münster University10.1063/1.3378674 ↗
25. Comparative atom probe study of Cu(In,Ga)Se2 thin-film solar cells deposited on soda-lime glass and mild steel substrates10.1063/1.3665723 ↗
26. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
27. M. Powalla, G. Voorwinden, B. Dimmler, Continuous Cu(In,Ga)Se2 deposition with improved process control, in: Proceedings of the 14th European Photovoltaic Solar Energy Conference, Barcelona, Spain, June 30–July4, 1997, p. 1270–1273.
28. Fe diffusion in polycrystalline Cu(In,Ga)Se2 layers for thin-film solar cells10.1063/1.3449125 ↗
29. Electronic properties of Cu(In;Ga)Se2 heterojunction solar cells – recent achievements, current understanding, and future challenges10.1007/s003390050984 ↗
30. Determination of defect distributions from admittance measurements and application to Cu(In,Ga)Se2 based heterojunctions10.1063/1.363401 ↗
31. Distinction between bulk and interface states in CuInSe2/CdS/ZnO by space charge spectroscopy10.1063/1.366686 ↗
32. Oxygenation and air-annealing effects on the electronic properties of Cu(In,Ga)Se2 films and devices10.1063/1.370758 ↗
33. Bulk and metastable defects in CuIn1−xGaxSe2 thin films using drive-level capacitance profiling10.1063/1.1633982 ↗
34. Reinterpretation of defect levels derived from capacitance spectroscopy of CIGSe solar cells10.1016/j.tsf.2008.10.092 ↗
35. Interpretation of admittance, capacitance-voltage, and current-voltage signatures in Cu(In,Ga)Se2 thin film solar cells10.1063/1.3277043 ↗
36. About RC-like contacts in deep level transient spectroscopy and Cu(In,Ga)Se2 solar cells10.1002/pip.2166 ↗
37. Pianezzi · J. Appl. Phys. · 2013 · 11410.1063/1.4832781 ↗