Gradient bandgap modification for highly efficient carrier transport in antimony sulfide-selenide tandem solar cells
Source abstract
Abstract
Antimony chalcogenides emerge as a type of efficient material for solar cells. In particular, antimony sulfide-selenide (SbSSe) has attracted significant interests based on their simple preparation, excellent photoelectric performance, and tunable bandgaps. In this study, by applying energy-band engineering technologies, we achieved carrier transport balance and light absorption balance for SbSSe single- and triple-junction solar cells, respectively. First in a single junction solar cell, the photoelectric conversion efficiency (PCE) of SbSSe solar cells is improved from 13.14% to 16.16% with a front-gradient Se content structure compared to a non-gradient Se content SbSSe solar cell. This improvement is attributed to the additional electric field induced by such a gradient bandgap, promoting the carrier motion. Consequently, the balance of carrier transport is realized by adjusting the drift velocities of holes and electrons simultaneously, thereby surpassing carrier recombination and improving the device parameters of short-circuit current density ( J sc ) and fill factor (FF). In a next step, an SbSSe of advanced gradient bandgap has been applied as the absorber layer of middle-cell in an antimony chalcogenide based triple-junction solar cell. Based on the high J sc and FF advantages of SbSSe sub-cells with front-gradient Se content structure, the uniform absorption of sunlight in each sub-cell and current matching of tandem solar cells could be easily realized. Eventually, the PCE of the triple-junction solar cell exhibits an enhancement from 17.34% to 19.51%. Our results demonstrate that the application of energy-band engineering technology can effectively improve device performance, providing theoretical guidance for the refined design and nanomanufacturing development of antimony chalcogenide solar cells.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Perovskite Materials and Applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Synthesis of wafer-scale graphene with chemical vapor deposition for electronic device applications10.1002/admt.202000744 ↗
2. Influence of thermal annealing of Ag NWs/AZO composite films on behavior of Ag NWs/AZO-P3HT photodetectors10.1016/j.jallcom.2020.156569 ↗
3. High‐performance electronics and optoelectronics of monolayer tungsten diselenide full film from pre‐seeding strategy
4. Electron-Driven in situ transmission electron microscopy of 2D transition metal dichalcogenides and their 2D heterostructures
5. Flexible perovskite solar cell-driven photo-rechargeable lithium-ion capacitor for self-powered wearable strain sensors10.1016/j.nanoen.2019.03.061 ↗
6. Recent progress on two-dimensional materials
7. Applications of carbon nanotubes in the internet of things era10.1007/s40820-021-00721-4 ↗
8. Emerging Internet of Things driven carbon nanotubes-based devices
9. Applications of 2D-Layered Palladium Diselenide and its van der Waals heterostructures in electronics and optoelectronics10.1007/s40820-021-00660-0 ↗
10. An effective formaldehyde gas sensor based on oxygen-rich three-dimensional graphene10.1088/1361-6528/ac4eb4 ↗
11. Wafer-scale two-dimensional platinum monosulfide ultrathin film via metal sulfurization for high performance photoelectronics10.1039/D1MA00757B ↗
12. Potential of MXene-based heterostructures for energy conversion and storage10.1021/acsenergylett.1c02132 ↗
13. Graphene biodevices for early disease diagnosis based on biomarker detection10.1021/acssensors.1c01172 ↗
14. Micro‐Nano processing of active layers in flexible tactile sensors via template methods: a review10.1002/smll.202100804 ↗
15. Large area uniform PtSx synthesis on sapphire substrate for performance improved photodetectors
16. Low lattice mismatch InSe–Se vertical van der Waals heterostructure for high‐performance transistors via strong fermi‐level depinning
17. Regulation of neural differentiation of ADMSCs using graphene‐mediated wireless‐localized electrical signals driven by electromagnetic induction
18. Technoeconomic analysis of high-value, crystalline silicon photovoltaic module recycling processes10.1016/j.solmat.2022.111592 ↗
19. Optimization of indium recovery from waste crystalline silicon heterojunction solar cells by acid leaching10.1016/j.solmat.2021.111218 ↗
20. Etching methods for texturing industrial multi-crystalline silicon wafers: a comprehensive review10.1016/j.solmat.2021.111531 ↗
21. Copper metallization of electrodes for silicon heterojunction solar cells: process, reliability and challenges10.1016/j.solmat.2021.110993 ↗
22. Life cycle assessment on PERC solar modules10.1016/j.solmat.2021.111112 ↗
23. Layup-only modulization for low-stress fabrication of a silicon solar module with 100 μm thin silicon solar cells10.1016/j.solmat.2020.110903 ↗
24. The potential of cast silicon[J]10.1016/j.solmat.2020.110789 ↗
25. A comparative life cycle assessment of silicon PV modules: impact of module design, manufacturing location and inventory10.1016/j.solmat.2021.111277 ↗
26. Status and perspectives of crystalline silicon photovoltaics in research and industry
27. Exceeding conversion efficiency of 26% by heterojunction interdigitated back contact solar cell with thin film Si technology10.1016/j.solmat.2017.06.024 ↗
28. Maximize CdTe solar cell performance through copper activation engineering10.1016/j.nanoen.2020.104835 ↗
29. Exceeding 20% efficiency with in situ group V doping in polycrystalline CdTe solar cells10.1038/s41560-019-0446-7 ↗
30. Innovative and industrially viable approach to fabricate AlOX rear passivated ultra-thin Cu(In,Ga)Se2 (CIGS) solar cells10.1016/j.solener.2020.07.038 ↗
31. Strain dependent effect on power degradation of CIGS thin film solar cell10.1016/j.solener.2019.11.012 ↗
32. An efficient Li+-doping strategy to optimize the band alignment of a Cu2ZnSn(S,Se)4/CdS interface by a Se&LiF co-selenization process10.1039/D0TA07268K ↗
33. Efficient and stable Ruddlesden–Popper perovskite solar cell with tailored interlayer molecular interaction10.1038/s41566-019-0572-6 ↗
34. Hot carriers perspective on the nature of traps in perovskites10.1038/s41467-020-16463-7 ↗
35. 9.2%-efficient core-shell structured antimony selenide nanorod array solar cells10.1038/s41467-018-07903-6 ↗
36. Sb2Se3 solar cells employing metal-organic solution coated CdS buffer layer10.1016/j.solmat.2021.111043 ↗
37. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance10.1016/j.solmat.2021.111045 ↗
38. Hydrothermal deposition of antimony selenosulfide thin films enables solar cells with 10% efficiency10.1038/s41560-020-0652-3 ↗
39. Theoretical insight into high-efficiency triple-junction tandem solar cells via the band engineering of antimony chalcogenides10.1002/solr.202000800 ↗
40. Graded energy band engineering for efficient perovskite solar cells10.1002/nano.202000005 ↗
41. Graded heterojunction of perovskite/dopant-free polymeric hole-transport layer for efficient and stable metal halide perovskite devices10.1016/j.nanoen.2020.105159 ↗
42. 15.3% efficient graded bandgap solar cells fabricated using electroplated CdS and CdTe thin films10.1016/j.solener.2016.06.067 ↗
43. Structural and compositional dependence of the CdTexSe1-x alloy layer photoactivity in CdTe-based solar cells
44. Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading10.1364/AO.58.006067 ↗
45. Optimization and improvement of a front graded bandgap CuInGaSe2 solar cell10.1016/j.solmat.2017.09.017 ↗
46. Stable infrared-emitting chemical composition gradient quantum dots for down-convertors and photodetectors10.1021/acsanm.0c02434 ↗
47. Band gap grading in microcrystalline silicon germanium thin film solar cells10.1016/j.jallcom.2015.01.224 ↗
48. Optical absorption of graded buffer layers and short circuit current improvement in SiGe solar cells grown on silicon substrates10.1016/j.solmat.2016.08.019 ↗
49. Enhancing PbS colloidal quantum dot tandem solar cell performance by graded band Alignment10.1021/acs.jpclett.9b02423 ↗
50. Achieving a high open-circuit voltage in inverted wide-bandgap perovskite solar cells with a graded perovskite homojunction10.1016/j.nanoen.2019.04.069 ↗
51. Graded bandgap perovskite solar cells10.1038/nmat4795 ↗
52. Cesium acetate-induced interfacial compositional change and graded band level in MAPbI3 perovskite solar cells10.1021/acsami.0c06315 ↗
53. Over 7% efficiency of Sb2(S,Se)3 solar cells via V-shaped bandgap engineering10.1002/solr.202000220 ↗
54. Development of antimony sulfide–selenide Sb2(S, Se)3-based solar cells10.1016/j.jechem.2017.09.031 ↗
55. Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D10.1016/j.solmat.2021.111184 ↗
56. Performance enhancement of Sb2Se3 solar cell using a back surface field layer: a numerical simulation approach10.1016/j.solmat.2020.110919 ↗
57. Dye-sensitized sputtered titaniumoxide films for photovoltaic applications: influence of the O2/Ar gas flow ratio during the deposition10.1016/S0927-0248(02)00215-5 ↗
58. Transient photovoltage overshoot in multi-cation perovskite solar cells: an interplay between interfacial ionic layer and photoinduced electric field10.1016/j.solmat.2021.111276 ↗
59. Implementation and understanding of p+ fired rear hole selective tunnel oxide passivating contacts enabling >22% conversion efficiency in p-type c-Si solar cells10.1016/j.solmat.2020.110809 ↗
60. Screening and optimization of processing temperature for Sb2Se3 thin film growth protocol: interrelation between grain structure, interface intermixing and solar cell performance10.1016/j.solmat.2021.111045 ↗
61. Heterojunction interface passivation strategy for Cu(In1-x,Gax)Se2 solar cell with nano-level engineering of Zn-based buffer structure via atomic layer deposition method10.1016/j.solmat.2021.111010 ↗
62. Will ultrathin CIGS solar cells overtake the champion thin-film cells? Updated SCAPS baseline models reveal main differences between ultrathin and standard CIGS10.1016/j.solmat.2022.111792 ↗
63. GaAsP/Si tandem solar cells: realistic prediction of efficiency gain by applying strain-balanced multiple quantum wells10.1016/j.solmat.2017.06.060 ↗
64. Temporal and thermal studies of charge transportation in self-assembly organic photovoltaic devices10.1063/1.1514398 ↗
65. Investigation and modeling of photocurrent collection process in multiple quantum well solar cells10.1016/j.solmat.2017.08.036 ↗
66. Selective observation of photo-induced electric fields inside different material components in bulk-heterojunction organic solar cell
67. A new simulation software of solar cells—wxAMPS10.1016/j.solmat.2011.10.010 ↗
68. Generalized reciprocity relations in solar cells with voltage-dependent carrier collection: application to p-i-n junction devices10.1103/PhysRevApplied.11.024029 ↗
69. A general design guideline for strain-balanced quantum-wells toward high-efficiency photovoltaics10.1016/j.solener.2020.06.037 ↗
70. Synthesizing Li doped TiO2 electron transport layers for highly efficient planar perovskite solar cell10.1016/j.spmi.2020.106627 ↗
71. Sb2S3 solar cells10.1016/j.joule.2018.04.003 ↗
72. Efficient inorganic-organic heterojunction solar cells employing Sb2(sx/Se1-x)3 graded-composition sensitizers10.1002/aenm.201301680 ↗
73. Numerical simulation: toward the design of high-efficiency planar perovskite solar cells10.1063/1.4885367 ↗
74. Efficient Sb2(S,Se)3/Zn(O,S) solar cells with high open-circuit voltage by controlling sulfur content in the absorber-buffer layers10.1016/j.solener.2021.09.039 ↗
75. Vapor transport deposition of highly efficient Sb2(S,Se)3 solar cells via controllable orientation growth
76. Compositionally graded absorber for efficient and stable near-infrared-transparent perovskite solar cells
77. Carrier drift velocity balance mechanism in Si-based thin film solarcells using graded microcrystalline SiGe absorption layer10.1016/j.solener.2015.01.023 ↗
78. HTL-free Sb2(S,Se)3 solar cells with an optimal detailed balance band gap10.1021/acsami.1c10758 ↗
79. Selenium‐graded Sb2(S1−xSex)3 for planar heterojunction solar cell delivering a certified power conversion efficiency of 5.7110.1002/solr.201700017 ↗
80. Ultrathin microcrystalline hydrogenated Si/Ge alloyed tandem solar cells towards full solar spectrum conversion10.1007/s11705-019-1906-0 ↗
81. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
82. Ishaq · 2020 · 4
83. Stable 6%-efficient Sb2Se3 solar cells with a ZnO buffer layer10.1038/nenergy.2017.46 ↗
84. Manipulating the electrical properties of Sb2(S,Se)3 film for high-efficiency solar cell10.1002/aenm.202002341 ↗
85. Substrate dependence on (Sb4Se6)n ribbon orientations of antimony selenide thin films: morphology, carrier transport and photovoltaic performance10.1016/j.jallcom.2021.158703 ↗
86. Conduction band energy-level engineering for improving open-circuit voltage in antimony selenide nanorod array solar cells
87. Revealing composition and structure dependent deep-level defect in antimony trisulfide photovoltaics10.1038/s41467-021-23592-0 ↗
88. One-dimensional Sb2Se3 enabling ultra-flexible solar cells and mini-modules for IoT applications10.1016/j.nanoen.2021.106101 ↗
89. Enhanced performance of antimony selenide thin film solar cell using PbI2 as a dopant
90. Controllable solution‐phase epitaxial growth of Q1D Sb2(S,Se)3/CdS heterojunction solar cell with 9.2% efficiency10.1002/adma.202104346 ↗
91. High‐efficiency Sb2(S,Se)3 solar cells with new hole transport layer‐free back architecture via 2D titanium‐carbide mxene
92. HTL-free Sb2(S,Se)3 solar cells with an optimal detailed balance band gap10.1021/acsami.1c10758 ↗
93. Regulating energy band Alignment via alkaline metal fluoride assisted solution post‐treatment enabling Sb2(S,Se)3 solar cells with 10.7% efficiency
94. Vapor transport deposition of highly efficient Sb2(S,Se)3 solar cells via controllable orientation growth
95. Numerical investigation of interface passivation strategies for Sb2Se3/CdS solar cells
96. Reducing the formation of Sb2O3 phase and selenium vacancy in Sb2Se3 thin film solar cells via hydrogen-assisted selenization10.1016/j.solmat.2021.111520 ↗
97. Efficient all‐inorganic Sb2S3 solar cells with matched energy levels using Sb2Se3 as hole transport layers10.1002/solr.202101017 ↗
98. Ultrathin SnO2 buffer layer aids in interface and band engineering for Sb2(S,Se)3 solar cells with over 8% efficiency10.1021/acsaem.1c03660 ↗
99. Performance enhancement in Sb2S3 solar cell processed with direct laser interference patterning10.1016/j.solmat.2021.111235 ↗
100. Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D10.1016/j.solmat.2021.111184 ↗