Low cost, eco-friendly, modified fly ash-based shape-stabilized phase change material with enhanced thermal storage capacity and heat transfer efficiency for thermal energy storage
Source abstract
Abstract
Abstract Owing to the high thermal capacity and nearly constant temperature during phase change, phase change material has been considered one of the most promising solar thermal energy storage materials. However, the development of high-performance shape-stabilized phase change material (SSPCM) based on a low-cost and eco-friendly supporting material remains a big challenge. Herein, a systematic experimental framework is proposed and used to respond to the challenge. By applying this framework, acid-modified fly ash (AMFA) was firstly used as the supporting material for lauric acid (LA) to prevent its leakage, while carbon nanotubes (CNTs) were utilized to improve its thermal conductivity. Specifically, the LA/AMFA/CNTs composites were synthesized via a facile and low-cost direct impregnation method. Subsequently, the as-prepared composites were systematically investigated by various characterization techniques. The results of leakage tests exhibited that the acid treatment could improve the PCM loading of fly ash and the relevant mechanism of acid-modified fly ash was identified. With the introduction of CNTs, the heat transfer efficiency of LA/AMFA/CNTs had been enhanced substantially. More importantly, compared with conventional supporting materials, the used fly ash in this work revealed much better environmental sustainability which we believe is of vital importance for the large-scale application of SSPCMs. Therefore, the study results not only facilitate the development of the desirable SSPCM based on cheap and eco-friendly supporting material and promote its practical application, but also serve to improve the comprehensive utilization level of fly ash solid waste.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Thermal characteristics of expanded perlite/paraffin composite phase change material with enhanced thermal conductivity using carbon nanotubes10.1016/j.enconman.2016.12.053 ↗
2. Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2018.01.012 ↗
3. Preparation and properties of solid-solid phase change materials based on polyethylene glycol and EPDM cross-linked resin containing cyclodextrin cavity10.1080/15567036.2018.1486918 ↗
4. Silica fume/capric acid-palmitic acid composite phase change material doped with CNTs for thermal energy storage10.1016/j.solmat.2017.12.036 ↗
5. Thermal properties of beeswax/graphene phase change material as energy storage for building applications10.1016/j.applthermaleng.2016.10.085 ↗
6. Enhanced thermal conductivity of palmitic acid/mullite phase change composite with graphite powder for thermal energy storage10.1016/j.renene.2019.02.031 ↗
7. Diatomite/CNTs/PEG composite PCMs with shape-stabilized and improved thermal conductivity: preparation and thermal energy storage properties10.1016/j.enbuild.2018.01.009 ↗
8. Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubes10.1016/j.energy.2013.04.010 ↗
9. Preparation and characterization of KNO3/diatomite shape-stabilized composite phase change material for high temperature thermal energy storage10.1016/j.jmst.2016.02.011 ↗
10. Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets10.1016/j.enbuild.2018.03.053 ↗
11. Thermal characterization of phase change materials based on linear low-density polyethylene, paraffin wax and expanded graphite10.1016/j.renene.2015.11.056 ↗
12. Fabrication and thermal characterization of kaolin-based composite phase change materials for latent heat storage in buildings10.1016/j.enbuild.2015.03.022 ↗
13. Biogeochemical responses of soil ecosystems to raw coal pollution in Xuanhua, China10.1007/s11368-019-02387-3 ↗
14. Using modified fly ash for mercury emissions control for coal-fired power plant applications in China10.1016/j.fuel.2016.02.043 ↗
15. Glass-ceramic from mixtures of bottom ash and fly ash10.1016/j.wasman.2012.05.040 ↗
16. Capric acid hybridizing fly ash and carbon nanotubes as a novel shape-stabilized phase change material for thermal energy storage10.1021/acsomega.9b01746 ↗
17. Microencapsulated myristic acid-fly ash with TiO2 shell as a novel phase change material for building application10.1007/s10973-017-6781-7 ↗
18. Physical and mechanical properties of fly ash and slag geopolymer concrete containing different types of micro-encapsulated phase change materials10.1016/j.conbuildmat.2018.04.016 ↗
19. Lauric acid hybridizing fly ash composite for thermal energy storage10.3390/min8040161 ↗
20. Song · 2018 · 30 · 147
21. Low-cost, shape-stabilized fly ash composite phase change material synthesized by using a facile process for building energy efficiency10.1016/j.matchemphys.2018.09.072 ↗
22. Experimental investigation on improvement of latent heat and thermal conductivity of shape-stable phase-change materials using modified fly ash10.1016/j.jclepro.2019.118952 ↗
23. Enhanced properties of diatomite-based composite phase change materials for thermal energy storage10.1016/j.renene.2019.09.001 ↗
24. Effect of pre-treatment methods on natural raw materials-based phase change material composites for building applications10.1016/j.conbuildmat.2020.120114 ↗
25. Effects of acid leaching and organic intercalation on the thermophysical properties of paraffin/expanded vermiculite composite phase change materials10.1016/j.clay.2020.105754 ↗
26. Pore structure modified diatomite-supported PEG composites for thermal energy storage10.1038/srep32392 ↗
27. Polyethylene glycol infused acid-etched halloysite nanotubes for melt-spun polyamide-based composite phase change fibers10.1016/j.clay.2019.105249 ↗
28. Improvement of acid modification and its effect on the adsorption of stearic acid into sepiolite
29. Emerging mineral-coupled composite phase change materials for thermal energy storage10.1016/j.enconman.2019.01.021 ↗
30. Lauric acid/modified sepiolite composite as a form-stable phase change material for thermal energy storage10.1016/j.clay.2017.05.035 ↗
31. Hierarchical nano-activated silica nanosheets for thermal energy storage10.1016/j.solmat.2017.04.009 ↗
32. Synthesis and thermal properties of a capric acid-modified expanded vermiculite phase change material10.1007/s10853-018-2988-7 ↗
33. A novel form-stable phase change material of palmitic acid-carbonized pepper straw for thermal energy storage10.1016/j.matlet.2019.03.130 ↗
34. Mullite stabilized palmitic acid as phase change materials for thermal energy storage10.3390/min8100440 ↗
35. Experiment study on the thermal properties of paraffin/kaolin thermal energy storage form-stable phase change materials10.1016/j.apenergy.2016.08.147 ↗
36. Assessing the feasibility of integrating form-stable phase change material composites with cementitious composites and prevention of PCM leakage10.1016/j.matlet.2016.12.052 ↗
37. Thermal properties of lauric acid filled in carbon nanotubes as shape-stabilized phase change materials10.1039/C7CP08557E ↗
38. Experimental study on a novel form-stable phase change materials based on diatomite for solar energy storage10.1016/j.solmat.2018.03.016 ↗
39. Latent heat storage in building materials10.1016/0378-7788(93)90040-2 ↗
40. Eutectic mixtures of capric acid and lauric acid applied in building wallboards for heat energy storage10.1016/j.enbuild.2005.10.006 ↗
41. DSC analysis for the evaluation of an energy storing wallboard10.1016/0040-6031(95)02456-5 ↗
42. Sewage sludge conditioning with coal fly ash modified by sulfuric acid10.1016/j.cej.2010.02.021 ↗
43. A cleaner electrolysis process to recover alumina from synthetic sulfuric acid leachate of coal fly ash10.1016/j.hydromet.2019.105196 ↗
44. Comparative study of carbon nanoparticles and single-walled carbon nanotube for light-heat conversion and thermal conductivity enhancement of the multifunctional PEG/diatomite composite phase change material10.1021/acsami.9b04349 ↗
45. A new approach for evaluating the sustainability of raw materials substitution based on embodied energy and the CO2 footprint10.1016/j.jclepro.2017.06.028 ↗
46. Life cycle assessment of two biologically produced phase change materials and their related products10.1007/s11367-014-0831-1 ↗
47. In situ synthesis and phase change properties of Na2SO4·10H2O@SiO2 solid nanobowls toward smart heat storage10.1021/jp202373b ↗
48. Prepared of sepiolite phase change material and study on their thermal and moisture performance
49. Preparation, characterization, and thermal properties of the microencapsulation of a hydrated salt as phase change energy storage materials10.1016/j.tca.2013.01.019 ↗
50. Study on preparation and properties of myristic-stearic acid/modified fly ash composite phase change energy storage materials