journal article·2021-08

An effective Li-containing interfacial-treating strategy for performance enhancement of air-processed CZTSSe solar cells

Xiao-Fei Dong, Ting-Ting Zheng, Feng-Xia Yang, Xu-Dong Sun, Lei Yu, Jiang-Tao Chen, Cheng-Wei Wang, Yun Zhao, Yan Li

Publisher page

Abstract

Abstract Though Li-doping/alloying has powerful effects on tailoring the band-gap and altering grain boundaries of the Cu2ZnSn(S,Se)4 (CZTSSe) absorbers to achieve an enhanced CZTSSe device performance, a simple and effective method is meaningful for overcoming the surviving drawbacks of massive Li losses in in-situ doping processes of adding lithium salt in precursor solution. Herein, we demonstrate an effective approach to significant increase the open-circuit voltage (VOC) and efficiency of the CZTSSe solar cells by simply coating a LiOH layer on the air-processed Cu2ZnSnS4 (CZTS) precursor film before selenization. It is found that the VOC could be adjusted by altering the coated LiOH concentration, and a 412 mV VOC could be obtained for 1 mg/mL LiOH, which is 30 mV higher than that of non-treated CZTSSe solar cells, and a 1.43 times higher efficiency of 7.8% is achieved. Characterizations prove that such LiOH coating approach can make Li enter the CZTSSe absorber and has the trend of locally accumulated at the grain boundaries, promote the crystallinity, lower the optical band-gap, improve the carrier mobility and decrease the transfer resistance, thus leading to the enhanced short-circuit current and fill factor for high device efficiencies. This study might imply a new kind of potential method for element doping and thus improving the CZTSSe device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Defect control for 12.5% efficiency Cu2ZnSnSe4 kesterite thin-film solar cells by engineering of local chemical environment10.1002/adma.202005268 ↗
2. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
3. Detailed balance limit of efficiency of p-n junction solar cells10.1063/1.1736034 ↗
4. 11.2% Efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
5. Open-circuit voltage loss of antimony chalcogenide solar cells: status, origin, and possible solutions10.1021/acsenergylett.0c00940 ↗
6. Lithium-assisted synergistic engineering of charge transport both in GBs and GI for Ag-substituted Cu2ZnSn(S,Se)4 solar cells10.1016/j.jechem.2020.03.007 ↗
7. Engineering solar cell absorbers by exploring the band alignment and defect disparity: the case of Cu- and Ag-based kesterite compounds10.1002/adfm.201502272 ↗
8. Defect engineering in multinary earth-abundant chalcogenide photovoltaic materials10.1002/aenm.201602366 ↗
9. Control of defect states of kesterite solar cells to achieve more than 11% power conversion efficiency10.1021/acsaem.0c01141 ↗
10. Band alignment of the CdS/Cu2Zn(Sn1-xGex)Se4 heterointerface and electronic properties at the Cu2Zn(Sn1-xGex)Se4 surface: x=0, 0.2, and 0.410.1021/acsami.8b19200 ↗
11. Interface engineering of CdS/CZTSSe heterojunctions for enhancing the Cu2ZnSn(S,Se)4 solar cell efficiency10.1016/j.mtener.2019.05.015 ↗
12. Study of (AgxCu1-x)2ZnSn(S,Se)4 monograins synthesized by molten salt method for solar cell applications10.1016/j.solener.2020.02.002 ↗
13. Thin film of (AgxCu1-x)2ZnSn(S,Se)4 (x=0.05-0.20) prepared by spray pyrolysis10.1016/j.tsf.2019.137532 ↗
14. Improvement of the photovoltaic performance of Ag-alloyed Cu2ZnSn(S,Se)4-based solar cells by optimizing the selenization temperature, Superlattice
15. Elemental precursor solution processed (Cu1-xAgx)2ZnSn(S,Se)4 photovoltaic devices with over 10% efficiency10.1021/acsami.7b03944 ↗
16. Solution-processed earth-abundant Cu2BaSn(S,Se)4 solar absorber using a low-toxicity solvent10.1021/acs.chemmater.8b02556 ↗
17. BaCu2Sn(S,Se)4: earth-abundant chalcogenides for thin-film photovoltaics10.1021/acs.chemmater.6b01832 ↗
18. Sn substitution by Ge: strategies to overcome the open-circuit voltage deficit of kesterite solar cells10.1021/acsaem.0c00763 ↗
19. Rear band gap grading strategies on Sn-Ge-alloyed kesterite solar cells10.1021/acsaem.0c01146 ↗
20. Synthesis and characterization of Ge doped Cu2ZnSn(S,Se)4 bulk in the presence of reactive liquid phase sintering aid10.1016/j.ceramint.2020.07.206 ↗
21. Improving the performance of solution-processed Cu2ZnSn(S,Se)4 photovoltaic materials by Cd2+ substitution10.1021/acs.chemmater.6b02111 ↗
22. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1-xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
23. Influence of extra trace Mn-doping on the properties of Cu2ZnSn(S,Se)4 absorber layer10.1016/j.optmat.2020.110707 ↗
24. Boosing the electrical properties of Cu2ZnSn(S,Se)4 solar cells via low amounts of Mg substituting Zn10.1021/acsaem.0c02121 ↗
25. Cation substitution in earth‐abundant kesterite photovoltaic materials10.1002/advs.201700744 ↗
26. The effect of Rb doping on CZTSSe solar cells10.1016/j.solener.2019.05.027 ↗
27. A new insight of In-doped Cu2ZnSn(S,Se)4 thin films for photovoltaic application10.1016/j.jallcom.2020.154492 ↗
28. Precise-tuning the in content to achieve high fill factor in hybrid buffer structured Cu2ZnSn(S,Se)4 solar cells10.1016/j.solener.2017.03.082 ↗
29. Sodium doping of solution-processed Cu2ZnSn(S,Se)4 thin film and its effect on Cu2ZnSn(S,Se)4 based solar cells
30. Effects of potassium on kesterite solar cells: similarities, differences and synergies with sodium10.1063/1.5013114 ↗
31. Cu2ZnSnS4 thin films generated from a single solution based precursor: the effect of Na and Sb doping10.1021/acs.chemmater.6b01499 ↗
32. Facile and low-cost sodium-doping method for high-efficiency Cu2ZnSnSe4 thin film solar cells10.1021/acs.jpcc.5b06381 ↗
33. Impact of Na doping on the carrier transport path in polycrystalline flexible Cu2ZnSn(S,Se)4 solar cells10.1002/advs.201903085 ↗
34. Revealing the role of potassium treatment in CZTSSe thin film solar cells10.1021/acs.chemmater.7b00418 ↗
35. Above 10% efficiency earth-abundant Cu2ZnSn(S,Se)4 solar cells by introducing alkali metal fluoride nanolayers as electron-selective contacts10.1016/j.nanoen.2018.06.028 ↗
36. Band alignment at the Cu2ZnSn(SxSe1−x)4/CdS interface10.1063/1.3600776 ↗
37. Characterization of electronic structure of Cu2ZnSn(SxSe1−x)4 absorber layer and CdS/Cu2ZnSn(SxSe1−x)4 interfaces by in-situ photoemission and inverse photoemission spectroscopies10.1016/j.tsf.2014.09.037 ↗
38. Progress and prospects of CZTSSe/CdS interface engineering to combat high open-circuit voltage deficit of kesterite photovoltaics: a critical review10.1039/D0TA06450E ↗
39. An efficient Li+-doping strategy to optimize the band alignment of a Cu2ZnSn(S,Se)4/CdS interface by a Se&LiF co-selenization process
40. Highly efficient solution-processed CZTSSe solar cells based on a convenient sodium-incorporated post-treatment method10.1016/j.jechem.2019.03.029 ↗
41. Enhancing grain growth for efficient solution-processed (Cu,Ag)2ZnSn(S,Se)4 solar cells based on acetate precursor10.1021/acsami.0c02629 ↗
42. Ag, Ge dual-gradient substitution for low-energy loss and high-efficiency kesterite solar cells10.1039/D0TA06318E ↗
43. High-efficiency (LixCu1−x)2ZnSn(S,Se)4 kesterite solar cells with lithium alloying10.1002/aenm.201801191 ↗
44. Complex interplay between absorber composition and alkali doping in High-efficiency kesterite solar cells10.1002/aenm.201701760 ↗
45. The role of Ag in aqueous solution processed (Ag,Cu)2ZnSn(S,Se)4 kesterite solar cells: antisite defect elimination and importance of Na passivation10.1039/C8TA02950D ↗
46. Substitution of Zn in Earth-Abundant Cu2ZnSn(S,Se)4 based thin film solar cells - a status review10.1016/j.solmat.2018.05.003 ↗
47. Earth-Abundant orthorhombic BaCu2Sn(SexS1–x)4 (x ≈ 0.83) thin film for solar energy conversion10.1021/acsenergylett.6b00324 ↗
48. Chemistry and dynamics of Ge in kesterite: toward band-gap-graded absorbers10.1021/acs.chemmater.7b03416 ↗
49. Liquid phase assisted grain growth in Cu2ZnSnS4 nanoparticle thin films by alkali element incorporation10.1039/C7RA13472J ↗
50. Kesterite solar-cells by drop-casting of inorganic sol-gel inks10.1016/j.solener.2020.07.093 ↗
51. Novel two-step CdS deposition strategy to improve the performance of Cu2ZnSn(S,Se)4 solar cell10.1016/j.jechem.2019.06.011 ↗
52. Formation of the front-gradient bandgap in the Ag doped CZTSe thin films and solar cells10.1016/j.jechem.2019.03.026 ↗
53. Cu content dependence of Cu2Zn(SnGe)Se4 solar cells prepared by using sequential thermal evaporation technique of Cu/Sn/Cu/Zn/Ge stacked layers10.1007/s10854-018-8915-5 ↗
54. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S,Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
55. New insight of Li-doped Cu2ZnSn(S,Se)4 thin films: Li-induced Na diffusion from soda lime glass by a cation-exchange reaction10.1021/acsami.7b07796 ↗
56. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S,Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
57. Influence of the selenization condition on the properties of ambient-air processed CZTSSe thin films and device performance10.1016/j.apsusc.2020.145872 ↗
58. Tuning the band gap of Cu2ZnSn(S,Se)4 thin films via lithium alloying10.1021/acsami.5b11535 ↗
59. Efficient Cu2ZnSn(Se,S)4 solar cells with 79% fill factor using two-step annealing10.1016/j.solmat.2020.110682 ↗
60. Achieving 11.95% efficient Cu2ZnSnSe4 solar cells fabricated by sputtering a Cu-Zn-Sn-Se quaternary compound target with a selenization process10.1039/C9TA00385A ↗
61. Optimization of DMSO-based precursor solution by H2O additive for performance enhancement of kesterite photovoltaic devices10.1016/j.solmat.2018.02.001 ↗
62. Phase equilibria in lithium-chalcogen systems: I. lithium-selenium10.1149/1.2407871 ↗
63. Effects of Ge alloying on device characteristics of kesterite-based CZTSSe thin film solar cells10.1021/acs.jpcc.5b11594 ↗
64. First-principles study on alkali-metal effect of Li, Na, and K in Cu2ZnSnS4 and Cu2ZnSnSe410.1002/pssc.201400345 ↗