Preparation and thermal properties of novel eutectic salt/nano-SiO2/ expanded graphite composite for thermal energy storage
Source abstract
Abstract
Abstract This paper presents a novel shape-stable phase change material (PCM) composite for thermal energy storage applications. The formulation of the material consists of the components: eutectic nitrate (NaNO3-KNO3) as thermal storage material, expanded graphite (EG) for improving structural stability and thermal conductivity, and SiO2 nanoparticles for improving specific heat. The material was successfully prepared by the mechanical dispersion method. The effects of EG and SiO2 nanoparticles additives on the thermophysical properties of the composite were investigated by SEM, STA, and LFA. The results showed that EG, SiO2 nanoparticles and eutectic nitrate have excellent chemical compatibility. The specific heat of the composite was 3.92 J/(g·K), which was 2.58 times higher than that of eutectic nitrate when the content of EG and SiO2 nanoparticles was 15 wt% and 1 wt%, respectively. The latent heat of the composite decreased with the increase of EG mass fraction, but overall an increase in energy storage density was found due to the addition of SiO2 nanoparticles. The thermal conductivity of the composite with 15 wt% EG and 1 wt% SiO2 nanoparticles was significantly increased by about 16.2 times compared with that of eutectic nitrate. Furthermore, thermal cycle stability was tested. The NaNO3-KNO3/1 wt% nano-SiO2/15 wt% EG composite showed no obvious specific heat change after 100 thermal cycles and 100 h high-temperature test, respectively. The prepared NaNO3-KNO3/nano-SiO2/EG composite has a promising application prospect in the high-temperature energy storage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Thermal and Photovoltaic Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A review of concentrated photovoltaic-thermal (CPVT) hybrid solar systems with waste heat recovery (WHR)10.1016/j.scib.2017.10.002 ↗
2. Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: a review to recent developments10.1016/j.apenergy.2015.09.016 ↗
3. Thermal energy storage (TES) for industrial waste heat (IWH) recovery: a review10.1016/j.apenergy.2016.06.147 ↗
4. Thermal analysis of solar thermal energy storage in a molten-salt thermocline10.1016/j.solener.2010.03.007 ↗
5. Thermal performance and cost analysis of a multi-layered solid-PCM thermocline thermal energy storage for CSP tower plants10.1016/j.apenergy.2016.06.034 ↗
6. Central receiver system solar power plant using molten salt as heat transfer fluid10.1115/1.2807210 ↗
7. Development of molten salt heat transfer fluid with low melting point and high thermal stability10.1115/1.4004243 ↗
8. A review on phase change energy storage: materials and applications10.1016/j.enconman.2003.09.015 ↗
9. Corrosion effect of phase change materials in solar thermal energy storage application10.1016/j.rser.2017.03.018 ↗
10. Preparation and thermal energy storage properties of LiNO3-KCl-NaNO3/expanded graphite composite phase change material10.1016/j.solmat.2017.05.035 ↗
11. Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model10.1016/j.enconman.2014.11.040 ↗
12. Densification of expanded graphite10.1016/S0008-6223(02)00077-5 ↗
13. A novel sebacic acid/expanded graphite composite phase change material for solar thermal medium-temperature applications10.1016/j.solener.2013.11.018 ↗
14. Thermal conductivities and characteristics of ternary eutectic chloride/expanded graphite thermal energy storage composites10.1016/j.apenergy.2015.03.020 ↗
15. Preparation of binary eutectic chloride/expanded graphite as high-temperature thermal energy storage materials10.1016/j.solmat.2015.12.038 ↗
16. Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials10.1016/j.applthermaleng.2010.11.022 ↗
17. Development of highly conductive KNO3/NaNO3 composite for TES (thermal energy storage)10.1016/j.energy.2014.03.127 ↗
18. KNO3/NaNO3-Graphite materials for thermal energy storage at high temperature: Part I. – elaboration methods and thermal properties10.1016/j.applthermaleng.2010.03.013 ↗
19. KNO3/NaNO3 – graphite materials for thermal energy storage at high temperature: Part II. – phase transition properties10.1016/j.applthermaleng.2010.03.014 ↗
20. A novel process for preparing molten salt/expanded graphite composite phase change blocks with good uniformity and small volume expansion10.1016/j.solmat.2017.05.046 ↗
21. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid-to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
22. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
23. Increment of specific heat of solar salt with SiO2 and Al2O3 nanoparticles10.1186/1556-276X-9-582 ↗
24. Malik · 2010
25. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
26. Increment of specific heat capacity of solar salt with SiO2 nanoparticles10.1186/1556-276X-9-582 ↗
27. Effect of nanoparticle dispersion on enhancing the specific heat capacity of quaternary nitrate for solar thermal energy storage application10.1016/j.solmat.2016.07.046 ↗
28. Research on thermal properties of novel silica nanoparticle/binary nitrate/expanded graphite composite heat storage blocks10.1016/j.solmat.2019.110055 ↗
29. Janz · 1979
30. Janz · 1981
31. Effect of SiO2 nanoparticles on specific heat capacity of low-melting-point eutectic quaternary nitrate salt10.1016/j.solmat.2018.01.014 ↗
32. Core-shell microstructure nanocomposites for synergistic adjustment of environmental temperature and humidity10.1038/srep36974 ↗
33. Enhancement of specific heat of ternary nitrate (LiNO3-NaNO3- KNO3) salt by doping with SiO2 nanoparticles for solar thermal energy storage10.1049/mnl.2014.0407 ↗
34. Enhanced specific heat capacity of molten salt-based nanomaterials: effects of nanoparticle dispersion and solvent material10.1016/j.actamat.2014.05.005 ↗
35. Effect of nanoparticle dispersion on specific heat capacity of a binary nitrate salt eutectic for concentrated solar power applications10.1016/j.ijthermalsci.2013.02.003 ↗
36. Effect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage10.1186/1556-276X-8-448 ↗
37. Thermal transport across nanoparticle-fluid interfaces: the interplay of interfacial curvature and nanoparticle - fluid interactions10.1039/C6CP06403E ↗
38. Crystallization behavior of nylon 6 nanocomposites10.1016/S0032-3861(03)00344-6 ↗
39. Preparation and thermal properties characterization of carbonate salt/carbon nanomaterial composite phase change material10.1016/j.enconman.2015.03.051 ↗
40. Expanded graphite embedded with aluminum nanoparticles as superior thermal conductivity anodes for high-performance lithium-ion batteries10.1038/srep33833 ↗
41. The shape-stabilized phase change materials composed of polyethylene glycol and various mesoporous matrices (AC, SBA-15 and MCM-41)10.1016/j.solmat.2011.08.020 ↗
42. Particle size effect on thermophysical properties of nanofluid and nanofluid based phase change materials: a review10.1016/j.molliq.2018.05.129 ↗
43. Thermal transport across nanoparticle-fluid interfaces: the interplay of interfacial curvature and nanoparticle-fluid interactions10.1039/C6CP06403E ↗