journal article·2020-04Open access

Broadband antireflective coatings for high efficiency InGaP/GaAs/InGaAsP/InGaAs multi-junction solar cells

Gyujin Oh, Yeongho Kim, Sang Jun Lee, Eun Kyu Kim

Abstract

Abstract Design and fabrication of antireflection coatings (ARCs) was performed to maximize the photocurrent of Ⅲ-Ⅴ solar cells based on InGaP, GaAs, InGaAsP, and InGaAs. The current-limiting behavior of multi-junction solar cells allowed only the specific design of ARCs to improve the total current density of multi-junction solar cells, which enabled thin and efficient antireflection layers to achieve their full potential. ARCs were designed for InGaP/GaAs and InGaAsP/InGaAs double junction solar cells and InGaP/GaAs/InGaAsP/InGaAs quadruple junction solar cells. From the ARC design results, the best solar cell reflectance at the region of interest appeared to be 1.44% for InGaP/GaAs solar cells, 2.17% for InGaAsP/InGaAs, and 0.48% for the quadruple junction solar cells. To achieve the preferred refractive index for the ARC structures, nanostructures fabricated via glancing angle deposition were utilized. With ARC fabricated structures, InGaP/GaAs double junction solar cells yielded a power conversion efficiency of 13.3%, which was 1.34 times higher than that of cells without ARC (9.91%). Additionally, calculation results for the various ARC designs using dual and triple material systems were provided to increase their applicability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: solar cell performance optimization · Nanowire Synthesis and Applications · Optical Coatings and Gratings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. The path towards sustainable energy10.1038/nmat4834 ↗
2. Over 30% efficient InGaP/GaAs tandem solar cells10.1063/1.118419 ↗
3. Refractive indexes and extinction coefficients of n- and p-type doped GaInP, AlInP and AlGaInP for multijunction solar cells10.1016/j.solmat.2017.09.028 ↗
4. Effects of buffer layer and back-surface field on MBE-grown InGaAsP/InGaAs solar cells10.7567/JJAP.55.022301 ↗
5. Band parameters for III–V compound semiconductors and their alloys10.1063/1.1368156 ↗
6. Multijunction solar cells for concentrating photovoltaics10.1039/B809257E ↗
7. Wafer bonded four‐junction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency10.1002/pip.2475 ↗
8. Towards an optimized all lattice-matched InAlAs/InGaAsP/InGaAs multijunction solar cell with efficiency >50%10.1063/1.4758300 ↗
9. Enhancement of silicon-wafer solar cell efficiency with low-cost wrinkle antireflection coating of polydimethylsiloxane10.1016/j.solmat.2017.10.004 ↗
10. Advanced techniques for glancing angle deposition10.1116/1.590019 ↗
11. Wafer-scale, three-dimensional helical porous thin films deposited at a glancing angle10.1039/C4NR00249K ↗
12. Partially ionized beam growth of tungsten oxide nanowires by oblique angle deposition10.1021/acs.cgd.8b01827 ↗
13. Growth characteristics of inclined columns produced by Glancing Angle Deposition (GLAD) and colloidal lithography10.1016/j.apsusc.2010.09.079 ↗
14. Physical self-assembly and the nucleation of three-dimensional nanostructures by oblique angle deposition10.1116/1.1743178 ↗
15. Broadband and antireflective characteristics of glancing angle deposited titanium dioxide nanostructures for photovoltaic applications10.1016/j.tsf.2019.05.067 ↗
16. Antireflection coatings combining interference multilayers and a nanoporous MgF2 top layer prepared by glancing angle deposition10.1016/j.surfcoat.2014.09.063 ↗
17. Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection10.1038/nphoton.2007.26 ↗
18. Comparison of electrical mixture rules for composites10.1007/BF01410321 ↗
19. Saleh · 2007
20. Spectral response measurements of monolithic GaInP/Ga(In)As/Ge triple-junction solar cells: measurement artifacts and their explanation10.1002/pip.514 ↗
21. Current-limiting behavior in multijunction solar cells10.1063/1.3596444 ↗
22. ASTM Int'l · 2012
23. Fabrication of GaInP/GaAs//Si solar cells by surface activated direct wafer bonding10.1109/JPHOTOV.2013.2273097 ↗
24. Current-matching estimation for multijunction cells within a CPV module by means of component cells10.1002/pip.2227 ↗
25. Materials pushing the application limits of wire grid polarizers further into the deep ultraviolet spectral range10.1002/adom.201600250 ↗
26. Querry · 1987
27. Self-consistent optical constants of SiO2 and Ta2O5 films10.1364/OME.6.003622 ↗
28. Broadband mid-infrared frequency comb generation in a Si3N4 microresonator10.1364/OL.40.004823 ↗
29. Pulsed laser deposited alumina thin films10.1016/j.ceramint.2015.09.048 ↗
30. Exploitation of multiple incidences spectrometric measurements for thin film reverse engineering10.1364/OE.20.015734 ↗
31. Refractive properties of magnesium fluoride10.1364/AO.23.001980 ↗
32. Optical constants of GaxIn1-xP lattice matched to GaAs10.1063/1.358632 ↗
33. Optical dispersion relations for GaP, GaAs, GaSb, InP, InAs, InSb, AlxGa1-xAs, and in1-xGaxAsyP1-y10.1063/1.343580 ↗
34. Broadband and omnidirectional anti-reflection layer for III/V multi-junction solar cells10.1016/j.solmat.2012.02.022 ↗
35. Raising the one-sun conversion e-ciency of III–V/Si solar cells to 32.8% for two junctions and 35.9% for three junctions10.1038/nenergy.2017.144 ↗
36. Performance evaluation of InGaP/GaAs solar cell with double layer ARC
37. Developing of dual junction GaInP/GaAs solar cell devices: effects of different metal contacts10.1007/s11082-018-1546-5 ↗