Interstitial light-trapping design for multi-junction solar cells
Source abstract
Abstract
Abstract We present a light-trapping design capable of significantly enhancing the photon absorption in any subcell of a multi-junction solar cell. The design works by coupling incident light into waveguide modes in one of the subcells via a diffraction grating, and preventing these modes from leaking into lower subcells via a low-index layer and a distributed Bragg reflector, which together form an omnidirectional mirror. This allows the thickness of the target subcell to be reduced without compromising photon absorption, which improves carrier collection, and therefore photocurrent. The paper focuses on using the composite structure to improve the radiation hardness of a InGaP/Ga(In)As/Ge space solar cell. In this context, it is shown via simulation that the Ga(In)As middle-cell thickness can be reduced from 3500 to 700 nm, whilst maintaining strong photon absorption, and that this leads to a significantly improved end-of-life photocurrent in the Ga(In)As middle cell. However, the design can in general be applied to a wide range of multi-junction solar cell types. We discuss the principles of operation of the design, as well as possible methods of its fabrication and integration into multi-junction solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: solar cell performance optimization · Semiconductor Quantum Structures and Devices · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Solar cell efficiency tables (version 47)10.1002/pip.2728 ↗
2. Solar cell generations over 40% efficiency10.1002/pip.1255 ↗
3. A. Caon, C. Baur, G. D′Accolti et al., Solar Generators for ESA Missions: in Orbit Performance and Future Challenges. 2014. pp. 1979–1985.
4. Luque · 2003
5. Radiation resistance of compound semiconductor solar cells10.1063/1.360236 ↗
6. Super-high-efficiency multi-junction solar cells10.1002/pip.606 ↗
7. Dilute nitride GaInNAs and GaInNAsSb solar cells by molecular beam epitaxy10.1063/1.2744490 ↗
8. Quadruple-Junction Inverted Metamorphic Concentrator Devices10.1109/JPHOTOV.2014.2364132 ↗
9. Requirements for a GaAsBi 1 eV sub-cell in a GaAs-based multi-junction solar cell10.1088/0268-1242/30/9/094010 ↗
10. Absorption properties of GaAsBi based p–i–n heterojunction diodes10.1088/0268-1242/30/9/094004 ↗
11. S.J. Sweeney, K. Hild, J. Shirong, The potential of GaAsBiN for Multi-Junction Solar Cells, 2013. pp. 2474–2478.10.1109/PVSC.2013.6744977 ↗
12. Two new efficient crystalline silicon light-trapping textures10.1002/(SICI)1099-159X(199907/08)7:4<317::AID-PIP282>3.0.CO;2-3 ↗
13. Crystalline silicon solar cells with enhanced light trapping via rear side diffraction grating10.1016/j.egypro.2015.07.036 ↗
14. Hexagonal sphere gratings for enhanced light trapping in crystalline silicon solar cells10.1364/OE.22.00A111 ↗
15. Experimental demonstration of 4n2 classical absorption limit in nanotextured ultrathin solar cells with dielectric omnidirectional back reflector10.1021/ph4001586 ↗
16. Thin-film silicon solar cell technology10.1002/pip.533 ↗
17. Light trapping in ultrathin plasmonic solar cells10.1364/OE.18.00A237 ↗
18. Plasmonic nanoparticle enhanced light absorption in GaAs solar cells10.1063/1.2988288 ↗
19. Loss mitigation in plasmonic solar cells: aluminium nanoparticles for broadband photocurrent enhancements in GaAs photodiodes10.1038/srep02874 ↗
20. Nanoparticle scattering for multi-junction solar cells: the trade-off between absorption enhancement and transmission loss10.1109/JPHOTOV.2016.2601944 ↗
21. Can plasmonic Al nanoparticles improve absorption in triple junction solar cells?10.1038/srep11852 ↗
22. K. Johnson, Grating Diffraction Calculator (GD-Calc®)] kjinnovation, Santa Clara CA, 95051, 2005
23. A. Mellor, N.P. Hylton, F. Shirley et al., Nanoparticle Scattering for Radiation-Hard Multi-Junction Space Solar Cells, 2015. pp. 1-5.10.1109/PVSC.2015.7355669 ↗
24. Validation of energy prediction method for a concentrator photovoltaic module in Toyohashi Japan10.1002/pip.2241 ↗
25. Radiation-resistant solar cells for space use10.1016/S0927-0248(00)00344-5 ↗
26. I. Institute, New Semiconductor Materials. Characteristics and Properties, access date May 2016, 〈http://www.ioffe.ru/SVA/NSM/〉.
27. T. Takamoto, T. Agui, K. Kamimura et al., Multijunction solar cell technologies - high efficiency, radiation resistance, and concentrator applications, 1, Vol.1, 2003. pp. 581–586.
28. Submicrometer gratings for solar energy applications10.1364/AO.34.002476 ↗
29. Modeling light trapping in nanostructured solar cells10.1021/nn203906t ↗
30. D. Bushnell, Optimisation of Strain-compensated Multi-Quantum Well Solar Cells] Imperial College London, London, UK, 2003.
31. A numerical study of Bi-periodic binary diffraction gratings for solar cell applications10.1016/j.solmat.2011.08.017 ↗
32. Upper limits to absorption enhancement in thick solar cells using diffraction gratings10.1002/pip.1086 ↗
33. Diffractive gratings for crystalline silicon solar cells—optimum parameters and loss mechanisms10.1002/pip.1151 ↗
34. Nanostructured broadband antireflection coatings on AlInP fabricated by nanoimprint lithography10.1016/j.solmat.2010.05.053 ↗
35. M.A. Steiner, J.F. Geisz, J.S. Ward et al., Mechanically Stacked Four-Junction concentrator Solar Cells, 2015. pp. 1–3.10.1109/PVSC.2015.7356151 ↗
36. Mechanical stacking multi junction solar cells using transparent conductive adhesive10.1016/j.egypro.2014.12.352 ↗
37. Refractive index dependence on optical gap in amorphous silicon—Part I. Si prepared by glow discharge10.1016/0020-0891(83)90019-2 ↗
38. Diffractive Backside Structures via Nanoimprint Lithography10.1016/j.egypro.2012.07.073 ↗
39. Large area plasmonic nanoparticle arrays with well-defined size and shape10.1364/OME.4.000944 ↗
40. Neviere · 2002
41. Light intensity enhancement by diffracting structures in solar cells10.1063/1.2960586 ↗