Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting
Source abstract
Abstract
Iron oxide nanostructures have emerged as promising materials for being used as photocatalysts for hydrogen production due to their advantageous properties. However, their low carrier mobility and short hole diffusion length limit their efficiency in water splitting. To overcome these drawbacks, in the present study, we synthetized a new hematite (alpha-Fe2O3) bi-layered nanostructure consisting of a top nanosphere layer and a nanotubular underneath one by electrochemical anodization. Annealing parameters such as temperature, heating rate and atmosphere were studied in detail in order to determine the optimum annealing conditions for the synthetized nanostructure. The obtained new bi-layered nanostructure was characterized by Field Emission Scanning Electron Microscopy, Raman Spectroscopy, Mott-Schottky analysis and Electrochemical Impedance Spectroscopy. The results show the best water splitting performance for the bi-layered nanostructure annealed in argon atmosphere at 500 degrees C at a heating rate of 15 degrees C min(-1) achieving a photocurrent density of similar to 0.143 mA cm(-2) at 1.54 V (vs. RHE). The results indicate that the bi-layered nanostructure is an efficient photocatalyst for applications such as water splitting
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron oxide chemistry and applications · Minerals Flotation and Separation Techniques · Mine drainage and remediation techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Nanostructured anodic iron oxide film as photoanode for water oxidation10.1088/0022-3727/42/13/135303 ↗
2. An investigation on room temperature synthesis of vertically oriented arrays of iron oxide nanotubes by anodization of iron10.1016/j.electacta.2009.07.012 ↗
3. Photoelectrochemical activity of as-grown, α-Fe2O3 nanowire array electrodes for water splitting10.1088/0957-4484/23/19/194009 ↗
4. Solar water splitting: progress using hematite (α-Fe2O3) photoelectrodes10.1002/cssc.201000416 ↗
5. α-Fe2O3 as a photocatalytic material: a review10.1016/j.apcata.2015.03.023 ↗
6. A significant cathodic shift in the onset potential of photoelectrochemical water splitting for hematite nanostructures grown from Fe–Si alloys10.1039/C3MH00173C ↗
7. Anodic nanotubular/porous hematite photoanode for solar water splitting: substantial effect of iron substrate purity10.1002/cssc.201300603 ↗
8. Fabrication of shape-controlled α-Fe2O3 nanostructures by sonoelectrochemical anodization for visible light photocatalytic application10.1016/j.matlet.2009.10.071 ↗
9. Ultrafast transient absorption studies of hematite nanoparticles: the effect of particle shape on exciton dynamics10.1002/cssc.201300571 ↗
10. Water oxidation at hematite photoelectrodes: the role of surface states10.1021/ja210755h ↗
11. Influence of annealing temperature on the morphology and the supercapacitance behavior of iron oxide nanotube (Fe-NT)10.1016/j.jpowsour.2014.07.022 ↗
12. Single-crystalline, wormlike hematite photoanodes for efficient solar water splitting10.1038/srep02681 ↗
13. Self-assembled hematite (α-Fe2O3) nanotube arrays for photoelectrocatalytic degradation of azo dye under simulated solar light irradiation10.1016/j.apcatb.2010.01.022 ↗
14. Dynamics of photogenerated holes in nanocrystalline α-Fe2O3 electrodes for water oxidation probed by transient absorption spectroscopy10.1039/C0CC03627G ↗
15. Thermal air oxidation of Fe: rapid hematite nanowire growth and photoelectrochemical water splitting performance10.1016/j.elecom.2012.06.038 ↗
16. Improved photoelectrochemical water splitting of hematite nanorods thermally grown on Fe–Ti alloys10.1016/j.elecom.2014.04.010 ↗
17. Highly oriented hematite nanorods arrays for photoelectrochemical water splitting10.1016/j.jpowsour.2012.01.093 ↗
18. Nanostructured hematite photoelectrochemical electrodes prepared by the low temperature thermal oxidation of iron10.1016/j.solmat.2011.01.049 ↗
19. Exploiting the dynamic Sn diffusion from deformation of FTO to boost the photocurrent performance of hematite photoanodes10.1016/j.solmat.2015.05.020 ↗
20. Identifying champion nanostructures for solar water-splitting10.1038/nmat3684 ↗
21. Solar water splitting for hydrogen production with Fe2O3 nanotubes prepared by anodizing method: effect of anodizing time on performance of Fe2O3 nanotube arrays10.1007/s10854-014-2450-9 ↗
22. Activation of hematite nanorod arrays for photoelectrochemical water splitting10.1002/cssc.201100066 ↗
23. Controlled growth of vertically oriented hematite/Pt composite nanorod arrays: use for photoelectrochemical water splitting10.1088/0957-4484/22/17/175703 ↗
24. Energetics and kinetics of light-driven oxygen evolution at semiconductor electrodes : the example of hematite10.1007/s10008-012-1957-3 ↗
25. Back electron−hole recombination in hematite photoanodes for water splitting10.1021/ja412058x ↗
26. Electrochemical performance of hematite nanoparticles derived from spherical maghemite and elongated goethite particles10.1016/j.jpowsour.2014.11.097 ↗
27. Water photooxidation by smooth and ultrathin α-Fe2O3 nanotube arrays10.1021/cm8030208 ↗
28. Preparation and electrochemical performance of porous hematite (α-Fe2O3) nanostructures as supercapacitor electrode material10.1007/s10008-013-2355-1 ↗
29. Synthesis and photoelectrochemical cell properties of vertically grown α-Fe2O3 nanorod arrays on a gold nanorod substrate10.1039/b921965j ↗
30. Thermally oxidized iron oxide nanoarchitectures for hydrogen production by solar-induced water splitting10.1016/j.ijhydene.2011.08.088 ↗
31. Preparation of superhydrophilic α-Fe2O3 nanofibers with tunable magnetic properties10.1016/j.tsf.2005.09.004 ↗
32. Crystalline iron oxide nanotube arrays with high aspect ratio as binder free anode for Li-ion batteries10.1002/pssa.201330537 ↗
33. Si-doped Fe2O3 nanotubular/nanoporous layers for enhanced photoelectrochemical water splitting10.1016/j.elecom.2013.07.024 ↗
34. Highly ordered iron oxide nanotube arrays as electrodes for electrochemical energy storage10.1016/j.elecom.2011.03.040 ↗
35. Fabrication of iron oxide nanotube arrays by electrochemical anodization10.1016/j.corsci.2014.07.019 ↗
36. Electrochemical capacitance of iron oxide nanotube (Fe-NT): effect of annealing atmospheres10.1088/0957-4484/26/26/265401 ↗
37. Vibrational spectroscopic characterization of hematite, maghemite, and magnetite thin films produced by vapor deposition10.1021/am1004943 ↗
38. Formation of nitrogen-doped graphene nanoscrolls by adsorption of magnetic γ-Fe2O3 nanoparticles10.1038/ncomms3319 ↗
39. Synthesis, properties, and applications of magnetic iron oxide nanoparticles10.1016/j.pcrysgrow.2008.08.003 ↗
40. Insight into magnetite׳s redox catalysis from observing surface morphology during oxidation10.1021/ja402599t ↗
41. Identification of iron oxide phases in thin films grown on Al2O3(0001) by Raman spectroscopy and X-ray diffraction10.1016/j.susc.2010.01.015 ↗
42. Electrochemical capacitor of magnetite in aqueous electrolytes10.1016/S0378-7753(02)00482-2 ↗
43. Plasma-chemical reduction of iron oxide photoanodes for efficient solar hydrogen production10.1016/j.ijhydene.2014.01.080 ↗
44. Optical properties of magnetite (Fe3O4)10.1088/0022-3719/12/6/027 ↗
45. Dynamics of photogenerated holes in surface modified α-Fe2O3 photoanodes for solar water splitting10.1073/pnas.1118326109 ↗
46. Electrical properties of alpha ferric oxide 2. Ferric oxide of high purity10.1016/0022-3697(63)90235-X ↗
47. Photoelectrochemical and impedance characteristics of specular hematite. 1. Photoelectrochemical, parallel conductance, and trap rate sudies10.1021/j100334a033 ↗
48. Enhancement of the field emission from the TiO2 nanotube arrays by reducing in a NaBH4 solution10.1021/am503379y ↗
49. Reduced TiO2 nanotube arrays for photoelectrochemical water splitting10.1039/c3ta10689f ↗
50. Heated goethite and natural hematite: can Raman spectroscopy be used to differentiate them?10.1016/j.vibspec.2007.07.003 ↗
51. Enhancement of photoelectrochemical activity for water splitting by controlling hydrodynamic conditions on titanium anodization10.1016/j.jpowsour.2015.03.174 ↗
52. The electronic structure of passive films formed on stainless steels10.1016/0010-938X(95)00084-W ↗
53. Preparation and photoelectrochemical characterization of porphyrin-sensitized α-Fe2O310.1149/1.3357257 ↗
54. Physical properties of hematite α-Fe2O3 thin films: application to photoelectrochemical solar cells10.1088/1674-4926/32/1/013001 ↗
55. Influence of feature size, film thickness, and silicon doping on the performance of nanostructured hematite photoanodes for solar water splitting10.1021/jp809060p ↗
56. Surface engineered doping of hematite nanorod arrays for improved photoelectrochemical water splitting10.1038/srep06627 ↗
57. Passivating surface states on water splitting hematite photoanodes with alumina overlayers10.1039/C0SC00578A ↗
58. Oxygen-deficient hematite nanorods as high-performance and novel negative electrodes for flexible asymmetric supercapacitors10.1002/adma.201305851 ↗
59. Importance of the band gap energy and flat band potential for application of modified TiO2 photoanodes in water photolysis10.1016/j.jpowsour.2007.10.082 ↗
60. A UV-crosslinked polymer electrolyte membrane for quasi-solid dye-sensitized solar cells with excellent efficiency and durability10.1039/c3cp00059a ↗
61. Photochemically produced quasi-linear copolymers for stable and efficient electrolytes in dye-sensitized solar cells10.1016/j.jphotochem.2014.05.018 ↗
62. Rationalization of dye uptake on titania slides for dye-sensitized solar cells by a combined chemometric and structural approach10.1002/cssc.201402194 ↗