Enhancement of power conversion efficiency and long-term stability of P3HT/PCBM solar cells using C60 derivatives with thiophene units as surfactants
Source abstract
Abstract
Abstract The synthesis and characterization of C 60 derivatives with different thiophene units, [6,6]-phenyl-C 61 -butyric acid 2-(2′-thienyl)ethyl ester ( PCBTE ), [6,6]-phenyl-C 61 -butyric acid 2-(2′,2″-bithiophene-5′-yl)ethyl ester ( PCBBTE ), and [6,6]-phenyl-C 61 -butyric acid 2-(2′,2″:5″,2″′-terthiophene-5′-yl)ethyl ester ( PCBTTE ), have been investigated as surfactants for bulk heterojunction (BHJ) organic solar cells comprised of P3HT and PCBM. We found that these surfactants could reduce the interfacial energy to prevent domain coarsening and macrophase separation in an active layer depending on their contents, in which PCBTTE was the most effective surfactant among the derivatives. The device performance was enhanced in presence of 5% PCBTTE with optimized devices showing a power conversion efficiency of 4.37% under AM 1.5 G (100 mW/cm 2 ) illumination. In the P3HT/PCBM/ PCBTTE ternary blends, the highest absorption coefficient was observed at the surfactant ratio of 5%, which led to an improvement in the J SC values. Additionally, the introduction of PCBTTE as a surfactant not only enhanced the power conversion efficiency of the solar cells, but also reduced the PCBM aggregation upon annealing, resulting in a better thermal stability. The compatibilizing effect could also be confirmed by DSC measurement revealing the different selective miscibility of P3HT and those C 60 derivatives with different thiophene units. These results indicated the superior compatibilizing effect of the PCBTTE for organic solar cell applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Nielsen · Solar Energy Materials & Solar Cells · 2010 · 94 · 155310.1016/j.solmat.2010.04.074 ↗
2. “Solvent annealing” effect in polymer solar cells based on poly(3-hexylthiophene) and methanofullerenes10.1002/adfm.200600624 ↗
3. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
4. Synthesis of New Indolocarbazole-acceptor alternating conjugated copolymers and their applications to thin film transistors and photovoltaic cells10.1021/ma802720n ↗
5. Chen · Solar Energy Materials & Solar Cells · 2010 · 94 · 224410.1016/j.solmat.2010.07.019 ↗
6. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
7. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
8. All-conjugated diblock copolymer of poly(3-hexylthiophene) -block-poly(3-phenoxymethylthiophene) for field-effect transistor and photovoltaic applications10.1016/j.orgel.2009.08.024 ↗
9. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells10.1002/adma.200602496 ↗
10. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
11. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
12. Intramolecular donor–acceptor regioregular poly(3-hexylthiophene)s presenting octylphenanthrenyl-imidazole moieties exhibit enhanced charge transfer for heterojunction solar cell applications10.1002/adfm.200701150 ↗
13. Highly efficient solar cells based on poly(3-butylthiophene) nanowires10.1021/ja800411b ↗
14. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
15. Synthesis of all-conjugated poly(3-hexylthiophene)-block-poly(3-(4′-(3″,7″-dimethyloctyloxy) -3′-pyridinyl)thiophene) and its blend for photovoltaic applications10.1002/pola.24689 ↗
16. Exciton diffusion measurements in poly(3-hexylthiophene)10.1002/adma.200800982 ↗
17. An experimental study on the molecular organization and exciton diffusion in a bilayer of a porphyrin and poly(3-hexylthiophene)10.1063/1.2958325 ↗
18. Tuning the dimensions of C60-based needlelike crystals in blended thin films10.1002/adfm.200500812 ↗
19. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
20. Single mode microwave irradiation to improve the efficiency of polymer solar cell based on poly(3-hexylthiophene) and fullerene derivative10.1063/1.3077612 ↗
21. The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance10.1021/ja806493n ↗
22. Amphiphilic diblock copolymer compatibilizers and their effect on the morphology and performance of polythiophene:fullerene solar cells10.1002/adma.200501787 ↗
23. Enhancement of P3HT/PCBM Photovoltaic Efficiency Using the Surfactant of Triblock Copolymer Containing Poly(3-hexylthiophene) and Poly(4-vinyltriphenylamine) Segments10.1021/ma1011182 ↗
24. A simple and effective way of achieving highly efficient and thermally stable bulk-heterojunction polymer solar cells using amorphous fullerene derivatives as electron acceptor10.1021/cm9009282 ↗
25. Synthesis of C-60-end capped P3HT and its application for high performance of P3HT/PCBM bulk heterojunction solar cells10.1039/b923752f ↗
26. Amphiphilic molecular design as a rational strategy for tailoring bicontinuous electron donor and acceptor arrays: photoconductive liquid crystalline oligothiophene-C60 dyads10.1021/ja802757w ↗
27. Direct determination of the electronic structure of the poly(3-hexylthiophene):phenyl-[6,6]-C61 butyric acid methyl ester blend10.1016/j.orgel.2010.07.023 ↗
28. Solubility-induced ordered polythiophene precursors for high-performance organic ohin-film transistors10.1002/adfm.200801763 ↗
29. Small-molecule thiophene-C60 dyads as compatibilizers in inverted polymer solar cells10.1021/cm102126a ↗
30. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗