Durable polyisobutylene edge sealants for organic electronics and electrochemical devices
Source abstract
Abstract
Abstract The performance of a desiccant-filled polyisobutylene edge sealant for organic electronics is reported. The sealant was applied through a low temperature lamination process using glass substrates and various seal widths. The performance was tested using the Ca corrosion method at 50 °C and 80% relative humidity (RH). Data show an effective water vapor transmission rate (WVTR), on the order of 10−3 g/m2/day in the transient regime with a breakthrough time greater than 1400 h for seals 1.5 mm wide and 0.3 mm thick. By changing the sealant architecture, the breakthrough time was increased with similar effective WVTRs. Finally, the sealant was applied to organic electrochromic devices, which displayed a retention of performance after 1000 h of storage at 50 °C and 80% RH.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Conducting polymers and applications · Organic Light-Emitting Diodes Research · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Organic light-emitting devices with extended operating lifetimes on plastic substrates10.1063/1.1514831 ↗
2. High-external-quantum-efficiency organic light-emitting devices10.1364/OL.22.000396 ↗
3. Vacuum-deposited, nonpolymeric flexible organic light-emitting devices10.1364/OL.22.000172 ↗
4. Evaluation of thin film passivation using inorganic Mg–Zn–F heterointerface for polymer light emitting diode10.1016/j.tsf.2009.12.094 ↗
5. Material challenge for flexible organic devices10.1016/S1369-7021(06)71446-8 ↗
6. Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium–tin-oxide10.1016/j.solmat.2009.04.020 ↗
7. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules10.1016/j.solmat.2009.07.015 ↗
8. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules10.1016/j.solmat.2011.01.010 ↗
9. Upscaling of polymer solar cell fabrication using full roll-to-roll processing10.1039/b9nr00430k ↗
10. Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality10.1364/OE.18.00A272 ↗
11. L.C. Olsen, M.E. Gross, G.L. Graff, S.N. Kundu, X. Chu, S. Lin, Approaches to encapsulation of flexible CIGS cells, in: Proceedings of the SPIE—Reliability of Photovoltaic Cells, Modules, Components, and Systems, 2008.10.1117/12.796104 ↗
12. Nanostructural characteristics and mechanical properties of low temperature plasma enhanced chemical vapor deposited silicon nitride thin films10.1166/jnn.2009.NS59 ↗
13. Thin-film permeation-barrier technology for flexible organic light-emitting devices10.1109/JSTQE.2004.824072 ↗
14. Reliability and degradation of organic light emitting devices10.1063/1.112532 ↗
15. Low-cost and reliabile thin film encapsulation for organic light emitting diodes using magnesium fluoride and zinc sulfide10.1016/j.tsf.2010.11.036 ↗
16. Licari · 2003
17. Y.H. Cho, J.H. Lee, W.J. Kim, M.H. Oh, B.D. Lee, J.B. Choi, Organic light emitting device and method of manufacturing the same, European Patent Office, 2006, pp. 1–20.
18. Water vapor transport in liquid crystalline and non-liquid crystalline epoxies10.1023/B:JMSC.0000026944.85440.f3 ↗
19. Ca test of Al2O3 gas diffusion barriers grown by atomic layer deposition on polymers10.1063/1.2221912 ↗
20. Permeation rate measurements by electrical analysis of calcium corrosion10.1063/1.1626015 ↗
21. N. Kim, Fabrication and Characterization of Thin-Film Encapsulation for Organic Electronics, Ph.D. Dissertation, Woodruff School of Mechanical Engineering, Georgia Insitute of Technology, Atlanta, 2009.
22. A hybrid encapsulation method for organic electronics10.1063/1.3115144 ↗
23. Mechanisms of vapor permeation through multilayer barrier films: lag time versus equilibrium permeation10.1063/1.1768610 ↗
24. Atomic layer deposition: an overview10.1021/cr900056b ↗
25. Electrochromic organic and polymeric materials for display applications10.1016/j.displa.2005.03.003 ↗
26. Spray coatable electrochromic dioxythiophene polymers with high coloration efficiencies10.1021/ma049222y ↗
27. Broadly absorbing black to transmissive switching electrochromic polymers10.1002/adma.201002234 ↗
28. A photochemical study of poly-(3-hexylthiophene)10.1021/ma00017a017 ↗