Dye-sensitized solar cells with a micro-porous TiO2 electrode and gel polymer electrolytes prepared by in situ cross-link reaction
Source abstract
Abstract
The ionic conductivities and performances of dye-sensitized solar cells (DSSCs) of gel polymer electrolytes (GPEs) prepared by in situ cross-link reaction with different cross-linkers were investigated. The poly(imidazole-co-butylmethacrylate)-based GPE containing the 1,2,4,5-tetrakis(bromomethyl)benzene (B4Br) cross-linker showed a higher ionic conductivity than that containing cross-linkers with a linear structure, due to the formation of micro-phase separation that resulted in an increase in ion transport paths in the GPE. Moreover, the co-adsorbent ((4-pyridylthio) acetic acid, PAA) co-adsorbed with N3 dye on the TiO2 electrode not only reduced dye aggregation, but also reacted with the cross-linkers in the GPE at the TiO2/GPE interface. A decrease in the charge transport resistance at the TiO2/GPE interface was noted after forming the gel; thus the value of JSC significantly increased from 7.72 to 10.00 mA cm−2. In addition, in order to reduce the ionic diffusion resistance within the TiO2 electrode, incorporation of monodispersed PMMA in the TiO2 paste was considered. With the optimal weight ratio of PMMA/TiO2 (w/w=3.75), the TiO2 electrode exhibited larger pores (ca. 350 nm) uniformly distributed after sintering at 500 °C, and the ionic diffusion resistance within the TiO2 film could significantly be reduced. The cell conversion efficiency increased from 3.61% to 5.81% under illumination of 100 mW cm−2, an improvement of ca. 55%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Review article: photoelectrochemical cells10.1038/35104607 ↗
3. Light-induced redox reactions in nanocrystalline systems10.1021/cr00033a003 ↗
4. Fabrication of dye-sensitized solar cells using triethylamine hydrothiocyanate as a CuI crystal growth inhibitor10.1021/la020421p ↗
5. Fabrication of solid-state dye-sensitized TiO2 solar cells combined with polypyrrole10.1016/S0927-0248(98)00052-X ↗
6. Novel hybrid solar cells consisting of inorganic nanoparticles and an organic hole transport material10.1016/S0379-6779(97)81221-0 ↗
7. Efficient titanium oxide/conjugated polymer photovoltaics for solar energy conversion10.1002/1521-4095(200011)12:22<1689::AID-ADMA1689>3.0.CO;2-9 ↗
8. Dye-sensitised photoelectrochemical solar cells with polyacrylonitrile based solid polymer electrolytes10.1016/S0013-4686(02)00166-4 ↗
9. Gel polymer electrolytes based on a novel quaternary ammonium salt for dye-sensitized solar cells10.1023/B:JACH.0000015622.11471.41 ↗
10. Supramolecular electrolytes for use in highly efficient dye-sensitized solar cells10.1002/adma.200306664 ↗
11. In situ preparation of poly(ethylene oxide)–SiO2 composite polymer electrolytes10.1016/j.jpowsour.2003.11.026 ↗
12. High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte10.1039/B209322G ↗
13. Dye-sensitized TiO2 solar cells using polymer gel electrolytes based on PVdF-HFP10.1149/1.1759698 ↗
14. Solidifying liquid electrolytes with fluorine polymer and silica nanoparticles for quasi-solid dye-sensitized solar cells10.1016/j.jfluchem.2004.05.010 ↗
15. Optimizations of large area quasi-solid-state dye-sensitized solar cells10.1016/j.solmat.2006.02.012 ↗
16. Quasi-solid-state dye-sensitized solar cells: Pt and PEDOT:PSS counter electrodes applied to gel electrolyte assemblies10.1016/j.jphotochem.2006.11.008 ↗
17. Quasi-solid dye sensitised solar cells filled with phase-separated chemically cross-linked ionic gels10.1039/b302793g ↗
18. Solidification of liquid electrolyte with imidazole polymers for quasi-solid-state dye-sensitized solar cells10.1016/j.matchemphys.2007.06.041 ↗
19. Investigation of sensitizer adsorption and the influence of protons on current and voltage of a dye-sensitized nanocrystalline TiO2 solar cell10.1021/jp022656f ↗
20. Transport of halogen ions through synthetic polymer membranes containing pyridine moieties10.1021/ma00158a011 ↗
21. Electrochemical properties of dye-sensitized solar cells fabricated with PVDF-type polymeric solid electrolytes10.1016/j.jphotochem.2003.12.021 ↗
22. Integrated chemical systems: photocatalysis at titanium dioxide incorporated into Nafion and clay10.1021/j100267a003 ↗
23. Electrochemical impedance spectroscopic analysis of dye-sensitized solar cells10.1021/jp052768h ↗
24. Influence of alkyl dihalide gelators on solidification of dye-sensitized solar cells10.1016/j.solmat.2006.12.018 ↗
25. Engineering of efficient panchromatic sensitizers for nanocrystalline TiO2-based solar cells10.1021/ja003299u ↗
26. Efficient near IR sensitization of nanocrystalline TiO2 films by ruthenium phthalocyanines10.1039/a708834e ↗
27. Effect of additives on the photovoltaic performance of coumarin-dye-sensitized nanocrystalline TiO2 solar cells10.1021/la0357615 ↗
28. A photo-physical and electrochemical impedance spectroscopy study on the quasi-solid state dye-sensitized solar cells based on poly(vinylidene fluoride-co-hexafluoropropylene)10.1016/j.jpowsour.2008.07.094 ↗
29. Improved stability quasi-solid-state dye-sensitized solar cell based on polyether framework gel electrolytes10.1016/j.solmat.2005.05.021 ↗