The reliability of thermography- and luminescence-based series resistance and saturation current density imaging
Source abstract
Abstract
The conventional quantitative evaluation of dark lock-in thermography (DLIT), electroluminescence (EL), and photoluminescence (PL) images of solar cells is based on the model of independent diodes, where each image pixel is assumed to be connected with the terminals by an independent series resistance. In reality, however, the solar cell represents a 2-dimensional resistance-diode network. In this work solar cells containing well-defined spatial distributions of the saturation current density J01 and also containing J02-type and ohmic shunts are modeled for various externally applied biases and illumination conditions realistically as a 2-dimensional resistance-diode network. The resulting local diode voltage distributions are converted into DLIT, EL and PL images, which are further processed by conventional evaluation methods, which rely on the simple model of independent diodes. These are the so-called “Local-IV” method for the DLIT analysis, which may be supported by EL results to obtain series resistance images, and “C-DCR” for the PL analysis. This leads to calculated images of the local effective series resistance Rs and of J01. Regarding the resulting Rs images, PL shows the expected series resistance distribution and is not affected by the shunt regions. The DLIT–EL Rs images instead yield expected values only in the homogeneous regions, which are not affected by the assumed shunts. DLIT–EL determines higher values of Rs in local shunt regions and lower values around these regions and in spatially extended shunt regions. Regarding the J01 images both methods again give the expected results if J01 is distributed homogeneously. However, in the shunted regions, PL suffers from balancing currents within the emitter and DLIT from optical blurring. By comparing local and extended regions of increased J01 we find that DLIT approximates the expected J01 value better than PL, which clearly underestimates even extended local maxima of J01. For a local current analysis of silicon solar cells we recommend the use of DLIT for the determination of J01 images and PL for the determination of Rs images.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thermography and Photoacoustic Techniques · Photovoltaic System Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Breitenstein · 2010
2. Spatially resolved series resistance of silicon solar cells obtained from luminescence imaging10.1063/1.2709630 ↗
3. Recombination current and series resistance imaging of solar cells by combined luminescence and lock-in thermography10.1063/1.2721138 ↗
4. Nondestructive local analysis of current–voltage characteristics of solar cells by lock-in thermography10.1016/j.solmat.2011.05.049 ↗
5. Spatially resolved determination of dark saturation current and series resistance of silicon solar cells10.1002/pssr.200903290 ↗
6. Evaluating luminescence based voltage images of silicon solar cells10.1063/1.3443438 ↗
7. Photoluminescence image evaluation of solar cells based on implied voltage distribution10.1016/j.solmat.2014.05.040 ↗
8. C. Shen, H. Kampwerth, M. Green, Spatially resolved photoluminescence imaging of essential silicon solar cell parameters, in: Proc. 38th IEEE Photovoltaic Specialists Conference, Austin, USA, 2012, pp. 1855–1859.10.1109/PVSC.2012.6317955 ↗
9. Local efficiency analysis of solar cells based on lock-in thermography10.1016/j.solmat.2012.07.019 ↗
10. Spatially resolved photoluminescence imaging of essential silicon solar cell parameters and comparison with CELLO measurements10.1016/j.solmat.2012.10.010 ↗
11. The effect of material inhomogeneities on the characteristics of semicrystalline silicon solar cells: the second diode10.1016/0927-0248(94)90236-4 ↗
12. Can luminescence imaging replace lock-in thermography on solar cells10.1109/JPHOTOV.2011.2169394 ↗
13. Comparison of DLIT- and PL-based local solar cell efficiency analysis10.1016/j.egypro.2013.07.243 ↗
14. Improved local efficiency imaging via photoluminescence for silicon solar cells10.1016/j.solmat.2014.01.003 ↗
15. J.-M. Wagner, J. Carstensen, A. Berhane, A. Schütt, H. Föll, Series resistance analysis with the shaded luminescence technique, in: Proc. 26th EU PVSEC, Hamburg, 2011, pp. 1569–1575.
16. Injection-level dependent series resistance: comparison of CELLO and photoluminescence-based measurements10.1016/j.egypro.2013.07.268 ↗
17. CELLO measurement technique for local identification and characterization of various types of solar cell defects10.1002/pssc.201083997 ↗
18. O. Breitenstein, J. Carstensen, A. Schütt, J.-M. Wagner, Comparison of local solar cell efficiency analysis performed by DLIT and CELLO, in: Proc. 28th EU PVSEC Conference, Paris, 2013, pp. 1538–1544.
19. Quantitative luminescence characterization of crystalline silicon solar cells
20. P. Nenzi, Ngspice Circuit Simulator Release 26, 2014, 〈http://ngspice.sourceforge.net/〉.
21. A two-diode model regarding the distributed series resistance10.1016/j.solmat.2012.11.021 ↗
22. D. Walter, A. Liu, E. Franklin, D. Macdonald, B. Mitchell, Th. Trupke, Contrast enhancement of luminescence images via point-spread deconvolution, in: Proc. 38th IEEE PVSC, Austin, TX, 2012, pp. 307–312.10.1109/PVSC.2012.6317624 ↗
23. Quantitative evaluation of electroluminescence images of solar cells10.1002/pssr.200903304 ↗
24. Reduced fill factors in multicrystalline silicon solar cells due to injection-level dependent bulk recombination lifetimes10.1002/1099-159X(200007/08)8:4<363::AID-PIP328>3.0.CO;2-Y ↗
25. Evaluation of luminescence images of solar cells for injection-level dependent lifetimes10.1016/j.solmat.2012.12.024 ↗
26. Evaluation of recombination velocities of grain boundaries by high resolution lock-in thermography10.1016/j.egypro.2013.07.263 ↗