Enhanced performance of ultra-thin Cu(In,Ga)Se2 solar cells deposited at low process temperature
Source abstract
Abstract
Abstract To investigate the process temperature on the growth of ultra-thin (≤500 nm) Cu(In,Ga)Se 2 (CIGSe) absorbers and the corresponding performance of solar cells, the process temperature was set to 610 °C and 440 °C, respectively. It was found that the low process temperature (440 °C) could reduce the inter-diffusion of Ga–In and thus result in a higher back [Ga]/([Ga]+[In]) ([Ga]/[III]) grading than at the temperature of 610 °C. The higher back [Ga]/[III] grading at 440 °C was evidenced to both electrically and optically contribute to the efficiency enhancement of the solar cells in contrast to the lower back [Ga]/[III] grading at 610 °C. It was also implied that the high back [Ga]/[III] grading was beneficial to the collection of carriers generated from the back-reflected light.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Addressing the terawatt challenge: scalability in the supply of chemical elements for renewable energy
2. Natural resource limitations to terawatt solar cell deployment10.1149/1.3553342 ↗
3. Influence of the Cu(In,Ga)Se2 thickness and Ga grading on solar cell performance10.1002/pip.462 ↗
4. Thinning of CIGS solar cells. Part II: cell characterizations10.1016/j.tsf.2010.12.224 ↗
5. A. Freundlich, N. Naghavi, Z. Jehl, F. Donsanti, J.-F. Guillemoles, I. Gérard, M. Bouttemy, A. Etcheberry, J.-L. Pelouard, S. Collin, C. Colin, N. Péré-Laperne, N. Dahan, J.-J. Greffet, B. Morel, Z. Djebbour, A. Darga, D. Mencaraglia, G. Voorwinden, B. Dimmler, M. Powalla, D. Lincot, J.-F.F. Guillemoles, Toward high efficiency ultra-thin CIGSe based solar cells using light management techniques, in: Proceedings of the SPIE 8256, 2012, p. 825617.10.1117/12.909419 ↗
6. Potential of submicrometer thickness Cu(In,Ga)Se2 solar cells10.1063/1.2128054 ↗
7. Graded band-gap Cu(in,Ga)Se2 thin-film solar-cell absorber with enhanced open-circuit voltage10.1063/1.110675 ↗
8. Effect of gallium grading in Cu(In,Ga)Se2 solar-cell absorbers produced by multi-stage coevaporation10.1016/j.solmat.2010.10.011 ↗
9. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
10. Study of the effect of gallium grading in Cu(In,Ga)Se210.1016/S0040-6090(99)00845-7 ↗
11. Temperature-dependent quantum efficiency analysis of graded-gap Cu(In,Ga)Se2 solar cells
12. Development of rear surface passivated Cu(In,Ga)Se2 thin film solar cells with nano-sized local rear point contacts10.1016/j.solmat.2013.07.025 ↗
13. High-efficiency CuInxGa1−xSe2 solar-cells made from (InxGa1−x)2Se3 precursor films10.1063/1.112670 ↗
14. Gallium gradients in chalcopyrite thin films: depth profile analyses of films grown at different temperatures10.1063/1.3656986 ↗
15. Depth profiling of Cu(In,Ga)Se2 thin films grown at low temperatures10.1016/j.solmat.2008.10.009 ↗
16. Highly efficient Cu(In,Ga)Se2 solar cells grown on flexible polymer film10.1038/nmat3122 ↗
17. Transfer of Cu(In,Ga)Se2 thin film solar cells to flexible substrates using an in situ process control10.1016/j.tsf.2004.11.067 ↗
18. Effect of Cu excess on three-stage CuGaSe2 thin films using in-situ process controls10.1016/j.tsf.2006.12.062 ↗
19. The determination of the optical constants of thin films from measurements of reflectance and transmittanceat normal incidence10.1088/0022-3727/5/4/329 ↗
20. Comprehensive comparison of various techniques for the analysis of elemental distributions in thin films10.1017/S1431927611000523 ↗
21. Efimova · 2011
22. Photogeneration and carrier recombination in graded gap Cu(In,Ga)Se solar cells10.1109/16.887004 ↗
23. Thin-film solar cells: device measurements and analysis10.1002/pip.518 ↗
24. Model for electronic transport in Cu(In,Ga)Se2 Solar cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
25. The effect of surface roughness on the determination of optical constants of CuInSe2 and CuGaSe2 thin films10.1063/1.4809550 ↗
26. Optical properties of CuIn1−xGaxSe2 quaternary alloys for solar-energy conversion10.1088/0268-1242/24/1/015014 ↗
27. Orgassa · 2004
28. Modelling polycrystalline semiconductor solar cells10.1016/S0040-6090(99)00825-1 ↗
29. P. Pistor, R. Klenk, On the advantage of a buried pn-junction in chalcopyrite solar cells: an urban legend, in: Proceedings of the NUMOS, 2007, pp. 179–182
30. Characterisation and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
31. Commercial white paint as back surface reflector for thin-film solar cells10.1016/j.solmat.2007.04.008 ↗