journal article·2015-03

Effect of the stoichiometry of CuxS thin films on the optical and electrical properties and the solar thermal performance

A. Cuevas, R. Romero, D. Leinen, E.A. Dalchiele, J.R. Ramos-Barrado, F. Martin

Publisher page

Abstract

Abstract The effects of the Cu x S stoichiometry, 1 ≤ x ≤ 2 , on the optical, electrical, and solar thermal properties of copper sulphide thin films, which have been deposited by chemical spray pyrolysis onto glass, have been studied. A full 3 2 factorial design has been applied to determine the effects of the substrate temperature and deposition time on the electrical and optical properties of the sulphide thin films. The sulphide film properties are strongly related to the Cu x S stoichiometry, and this relationship is dependent on the substrate temperature. Therefore, the electrical resistivity of the films varies in the range of 10 −4 Ω cm to 10 −1 Ω cm as × increases from 1 to 2. The relationship between the stoichiometry and conductivity has been established with infrared reflectance, solar absorptance and thermal emittance. The optical constants have been obtained using optical models (Classical Drude).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Copper-based nanomaterials and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Photovoltaic effect in cadmium sulfide10.1103/PhysRev.96.533 ↗
2. Reactive sputtering of thin Cu2S films for application in solar cells10.1016/0040-6090(84)90487-5 ↗
3. Copper sulfide (CuxS) thin films as possible p-type absorbers in 3D Solar Cells10.1016/j.egypro.2010.07.013 ↗
4. Copper sulfides obtained by spray pyrolysis - possible absorbers in solid-state solar cells10.1016/j.tsf.2006.12.073 ↗
5. Spectrally selective copper sulphide coatings10.1016/0165-1633(81)90024-1 ↗
6. Spectrally selective copper oxide films10.1016/0306-2619(83)90028-4 ↗
7. Near-ideal solar control characteristics of CuxS thin films10.1088/0268-1242/4/7/020 ↗
8. Chemical bath deposition of CuxS thin films and their prospective large area applications10.1088/0268-1242/4/3/009 ↗
9. Prospects of chemically deposited metal chalcogenide thin films for solar control applications10.1088/0022-3727/22/6/021 ↗
10. CuS-based thin films for architectural grazing applications produced by co-evaporation; Morphology, optical and electrical properties10.1016/j.surfcoat.2009.08.037 ↗
11. Optical and mechanical characteristics of clear and solar control laminated glass using zinc sulphide and copper sulphide thin films10.1016/j.surfcoat.2004.10.140 ↗
12. J.S. Chung, G.J. Sohn, Electrochemical behaviors of CuS as a cathode material for lithium secondary batteries, J. Power Sources 108 (2022) 226-231.10.1016/S0378-7753(02)00024-1 ↗
13. Porperties of CuxS thin film based structures: influence on the sensitivity to ammonia at room temperatures10.1016/S0040-6090(01)00995-6 ↗
14. Copper sulfide films obtained by spray pyrolysis for dyes photodegradation under visible light irradiation10.1016/j.jphotochem.2012.11.011 ↗
15. Novel applications of chemically deposited CuxS thin films10.1016/0167-577X(95)00034-8 ↗
16. Conductive copper sulfide thin films on polyimide foils10.1088/0268-1242/16/2/311 ↗
17. Foils stable transparent substrates for conductive copper sulfide thin film coatings10.1016/S0040-6090(01)01629-7 ↗
18. Conductivity anisotropy and structural phase transition in covellite CuS10.1016/0038-1098(93)90689-K ↗
19. Fabrication and microstructure of p-type transparent conducting CuS thin film and its application in dye-sensitized solar cell10.1063/1.2991441 ↗
20. C. Nunes de Carvalho, transparent p-type CuxS thin films10.1016/j.jallcom.2011.01.174 ↗
21. Optical and electrical properties of copper sulfide films of variable composition10.1006/jssc.1995.1070 ↗
22. Deposition of copper sulfide hollow nanospheres in aqueous solution at room temperature10.1016/j.mseb.2008.11.005 ↗
23. Characterization of copper sulfide nanostructured spheres and nanotubes synthesized by microwave-assisted solvothermal method10.1016/j.matlet.2009.10.021 ↗
24. Synthesis and characterization of cuprous sulfide crystals with novel morphology10.1016/j.matlet.2007.12.032 ↗
25. Copper sulfide nanorods grown at room temperature for photovoltaic application10.1016/j.matlet.2012.09.013 ↗
26. Spectrally selective copper sulphide coatings10.1016/0165-1633(81)90024-1 ↗
27. Spray pyrolysis deposition of CuS thin films10.1016/S0167-577X(97)00015-3 ↗
28. Preparation of covellite and digenite thin films by an intermittent spray pyrolysis deposition method10.1016/S0955-2219(01)00183-2 ↗
29. Optical and electrical properties of copper sulfide films of variable composition10.1006/jssc.1995.1070 ↗
30. Modified chemical and physic-chemical properties of copper sulphide (Cu2S) thin films10.1016/S0169-4332(02)00843-7 ↗
31. Synthesis of CuS thin films by microwave assisted chemical bath deposition10.1016/j.apsusc.2009.08.104 ↗
32. Optical properties and solar selectivity of flash-evaporated copper sulphide films10.1016/0040-6090(86)90368-8 ↗
33. Reactively evaporated copper sulphide films10.1016/0022-3697(84)90039-8 ↗
34. Structure identification and optical and electrical properties of cuprous sulphide layers in relation with solar energy application10.1016/0165-1633(79)90005-4 ↗
35. Structural, electrical and optical properties of Cu2S layers produced by reactive R.F. Sputtering10.1016/0040-6090(79)90359-6 ↗
36. Spray pyrolysis deposition of CuS thin films10.1016/S0167-577X(97)00015-3 ↗
37. Conversion of chemically deposited CuS thin films to and by annealing10.1088/0268-1242/13/10/019 ↗
38. Synthesis of nanostructured CuxS thin films by chemical route at room temperature and investigation of their size dependent physical properties10.1016/j.jallcom.2011.07.009 ↗
39. The formation of Cu2S from the elements I. Copper used in form of powders10.1016/S0040-6031(00)00545-1 ↗
40. Thermal oxidation of covellite10.1016/S0040-6031(00)00748-6 ↗
41. An investigation on substrate temperature and copper to sulphur molar ratios on optical and electrical properties of nanostructural CuS thin films prepared by spray pyrolysis method10.1016/j.apsusc.2012.02.079 ↗
42. Optical and structural properties of copper-deficient copper(I) sulfides10.1021/ja805655b ↗
43. Sonochemical preparation of copper sulfides with different phases in aqueous solutions10.1016/j.materresbull.2012.12.020 ↗
44. Anion distributions and phase transitions in CuS1−xSex(x=0–1) studied by raman spectroscopy10.1006/jssc.1993.1242 ↗
45. Asynchronous-pulse ultrasonic spray pyrolysis deposition of CuxS (x=1, 2) thin films10.1016/S0921-5107(03)00199-5 ↗
46. Experimental study of the copper thiosulfate system with respect to thin-film deposition10.1016/0040-6090(94)90167-8 ↗
47. Recommendations on uniform colour spaces, colour difference equation, psychometric colour terms
48. Modeling of optical and electrical properties of In2O3: Sn coatings made by various techniques10.1016/j.tsf.2005.07.277 ↗
49. Optical study of InZnO/Ag/InZnO thin films grown on glass substrates by using spectroscopic ellipsometry: plasmon and antireflection effects10.3938/jkps.56.625 ↗
50. Optical properties of ultrathin aluminum films deposited by magnetron sputtering in visible band10.1016/j.optmat.2005.04.011 ↗
51. Controlling the crystallite size and influence of the film thickness on the opticaland electrical characteristics of nanocrystalline Cu2S films10.1016/j.materresbull.2011.11.035 ↗
52. Optical properties of amorphous CuS thin films deposited chemically at different pH values10.1016/j.jallcom.2011.11.054 ↗
53. Localized surface plasmon resonances arising from free carriers in doped quantum dots Joseph M. Luther10.1038/nmat3004 ↗
54. Advanced optical materials for energy efficiency and solar conversion10.1016/0741-983X(87)90067-1 ↗
55. Pain · 1979 · 206
56. Coatings for enhanced photothermal energy collection10.1016/0165-1633(79)90001-7 ↗