journal article·2019-09

Preparation and thermal energy storage properties of erythritol/polyaniline form-stable phase change material

Yu-Hang Chen, Liu-Mo Jiang, Yu Fang, Li Shu, Yu-Xiang Zhang, Ting Xie, Kun-Yu Li, Ni Tan, Ling Zhu, Zhong Cao, Ju-Lan Zeng

Publisher page

Abstract

Abstract Erythritol (ME)/polyaniline (PANI) form-stable phase change materials (PCMs) were prepared in isopropanol via a simple method. ME was dispersed in the solvent to form suspension at first. Form-stable PCMs were then obtained by covering the dispersed ME particles with PANI particles, which in turn were synthesized via surface polymerization of aniline in the solvent. The prepared form-stable PCMs were characterized by various characterization techniques. The results showed that the loading of ME in the form-stable PCM with good form-stability could attain 75%, corresponding to a melting enthalpy of about 260 J/g. The supercooling degree of ME in the form-stable PCMs was stably suppressed from 103 °C to 60 °C, which was resulted from that the PANI presented a lot of nucleation centers and facilitated the heterogeneous nucleation of ME. The solidification enthalpy of the form-stable PCM was improved to 180 J/g, which was 50 J/g higher than that of pristine ME. Accelerated cyclic melting/freezing tests showed that the solidification temperature and the latent heat storage capacity of the prepared form-stable PCMs remained stable over 100 melting/freezing cycles. The form stability of the form-stable PCMs were originated from that the ME particles were covered by a layer of PANI particles, and the PANI particles could adsorb the liquified ME. This work presented a protocol for preparation of polymer-based sugar alcohols form-stable PCMs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Conducting polymers and applications · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Form-stable phase change materials for thermal energy storage10.1016/j.rser.2012.01.015 ↗
2. Supercooling suppression and thermal conductivity enhancement of Na2HPO4·12H2O/expanded vermiculite form-stable composite phase change materials with Alumina for heat storage10.1021/acssuschemeng.8b00631 ↗
3. Enhancement of thermal conductivity by the introduction of carbon nanotubes as a filler in paraffin/expanded perlite form-stable phase-change materials10.1016/j.enbuild.2017.05.037 ↗
4. Lauric acid/modified sepiolite composite as a form-stable phase change material for thermal energy storage10.1016/j.clay.2017.05.035 ↗
5. Emerging mineral-coupled composite phase change materials for thermal energy storage10.1016/j.enconman.2019.01.021 ↗
6. Experimental study on a novel form-stable phase change materials based on diatomite for solar energy storage10.1016/j.solmat.2018.03.016 ↗
7. Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material10.1016/S0927-0248(00)00041-6 ↗
8. Shape stabilised phase change materials based on a high melt viscosity HDPE and paraffin waxes10.1016/j.apenergy.2015.10.030 ↗
9. Preparation and thermal properties of form-stable phase change materials composed of palmitic acid/polypyrrole/graphene nanoplatelets10.1016/j.enbuild.2015.04.042 ↗
10. Preparation and characterization of in situ grafted/crosslinked polyethylene glycol/polyvinyl alcohol composite thermal regulating fiber10.1016/j.solmat.2015.04.014 ↗
11. Preparation and thermal properties of palmitic acid/polyaniline/exfoliated graphite nanoplatelets form-stable phase change materials10.1016/j.apenergy.2013.10.061 ↗
12. Preparation and thermal properties of palmitic acid/polyaniline/copper nanowires form-stable phase change materials10.1007/s10973-013-3508-2 ↗
13. Myristic acid/polyaniline composites as form stable phase change materials for thermal energy storage10.1016/j.solmat.2013.03.006 ↗
14. Stearic acid/polymethylmethacrylate composite as form-stable phase change materials for latent heat thermal energy storage10.1016/j.renene.2010.12.022 ↗
15. Ca(NO3)2-NaNO3/expanded graphite composite as a novel shape-stable phase change material for mid- to high-temperature thermal energy storage10.1016/j.enconman.2018.02.057 ↗
16. Palmitic acid/polyvinyl butyral/expanded graphite composites as form-stable phase change materials for solar thermal energy storage10.1016/j.apenergy.2018.07.068 ↗
17. Stearic acid/expanded graphite as a composite phase change thermal energy storage material for tankless solar water heater10.1016/j.scs.2018.10.041 ↗
18. Using silicagel industrial wastes to synthesize polyethylene glycol/silica-hydroxyl form-stable phase change materials for thermal energy storage applications10.1016/j.solmat.2018.01.016 ↗
19. Experimental and numerical investigation of form-stable dodecane/hydrophobic fumed silica composite phase change materials for cold energy storage10.1016/j.enconman.2015.08.038 ↗
20. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2016.04.057 ↗
21. Recent advances on thermal conductivity enhancement of phase change materials for energy storage system: a review10.1016/j.ijheatmasstransfer.2018.08.049 ↗
22. Computational design of non-natural sugar alcohols to increase thermal storage density: beyond existing organic phase change materials10.1021/jacs.6b05902 ↗
23. Stability of sugar alcohols as PCM for thermal energy storage10.1016/j.solmat.2014.03.020 ↗
24. Polyols as phase change materials for surplus thermal energy storage10.1016/j.apenergy.2015.03.064 ↗
25. A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)10.1016/j.rser.2009.10.015 ↗
26. Erythritol: crystal growth from the melt10.1016/j.ijpharm.2009.12.043 ↗
27. Relaxation of supercooling of erythritol for latent heat storage10.1252/jcej.34.376 ↗
28. Supercooling and solidification behavior of phase change10.2355/isijinternational.50.1265 ↗
29. Novel microstructured polyol–polystyrene composites for seasonal heat storage10.1016/j.apenergy.2016.03.023 ↗
30. Supercooling suppression and thermal behavior improvement of erythritol as phase change material for thermal energy storage10.1016/j.solmat.2017.06.027 ↗
31. Continuous carbon nanotube–ultrathin graphite hybrid foams for increased thermal conductivity and suppressed subcooling in composite phase change materials10.1021/acsnano.5b02917 ↗
32. Experiments on thermal performance of erythritol/expanded graphite in a direct contact thermal energy storage container10.1016/j.applthermaleng.2016.11.073 ↗
33. Thermal characterization of erythritol/expanded graphite composites for high thermal storage capacity10.1016/j.carbon.2013.09.053 ↗
34. Preparation and thermal properties of exfoliated graphite/erythritol/mannitol eutectic composite as form-stable phase change material for thermal energy storage10.1016/j.solmat.2018.01.012 ↗
35. Preparation of erythritol–graphite foam phase change composite with enhanced thermal conductivity for thermal energy storage applications10.1016/j.carbon.2015.06.075 ↗
36. The effects of nanoparticles on morphology and thermal properties of erythritol/polyvinyl alcohol phase change composite fibers
37. Fabrication and characterization of stearic acid/polyaniline composite with electrical conductivity as phase change materials for thermal energy storage10.1016/j.enconman.2015.03.115 ↗
38. Effect of fabrication methodology on morphology, conductivity, and thermal-energy storage of a stearic acid/doped-polyaniline phase-change material10.1002/ente.201500024 ↗
39. Nanofiber formation in the chemical polymerization of aniline: a mechanistic study10.1002/ange.200460616 ↗
40. Polyaniline: aniline oxidation with strong and weak oxidants under various acidity10.1016/j.matchemphys.2017.03.028 ↗
41. Preparation and electrochemical performance of polyaniline-MnO2 nanorod composites
42. Preparation of polyaniline microplates via a novel template-free method10.1016/j.synthmet.2009.04.020 ↗
43. Heat capacities of some sugar alcohols as phase change materials for thermal energy storage applications10.1016/j.jct.2017.08.004 ↗
44. Phase-change characteristic Analysis of partially melted sodium acetate trihydrate using DSC10.1007/s10765-014-1560-1 ↗
45. Preparation of phase change material emulsions with good stability and little supercooling by using a mixed polymeric emulsifier for thermal energy storage10.1016/j.solmat.2017.10.025 ↗
46. Review on the control of ice nucleation by ultrasound waves, electric and magnetic fields10.1016/j.jfoodeng.2016.10.001 ↗