Numerical and experimental study of paraffin/expanded graphite phase change materials with an anisotropic model
Source abstract
Abstract
Abstract A series of paraffin/expanded graphite (EG) composites with various mass fraction were prepared. The microscopic geometry configuration, thermal conductivity and saturation sorption capacity of EG were obtained. In this paper, a method based on the experiments of EG pores was proposed for constructing geometric models. The geometric model constructed by this method has obvious anisotropy and has been employed in the calculation. Furthermore, the numerical results of thermal conductivity indicate anisotropy of a single-pore. Moreover, it had been observed by experiment that the anisotropy is weakened and transformed to isotropy in the process of combining geometric models with a large number of single pores. The final numerical results agree well with the experiments, which validates the precision and reliability of the proposed model. The increasement of thermal conductivity is also calculated and discussed during the phase change process of paraffin/EG.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Phase Change Materials Research · Solar Thermal and Photovoltaic Systems · Radiative Heat Transfer Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. The technical, geographical, and economic feasibility for solar energy to supply the energy needs of the US10.1016/j.enpol.2008.08.011 ↗
2. Renewable energy in India: historical developments and prospects10.1016/j.energy.2008.10.017 ↗
3. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications10.1016/S1359-4311(02)00192-8 ↗
4. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗
5. A review of the composite phase change materials: fabrication, characterization, mathematical modeling and application to performance enhancement10.1016/j.apenergy.2015.12.043 ↗
6. Temperature reduction due to the application of phase change materials10.1016/j.enbuild.2007.07.008 ↗
7. Thermal conductivity enhancement of phase change materials for thermal energy storage: a review10.1016/j.rser.2010.08.007 ↗
8. Comparison of pinned and finned tubes in a phase change thermal energy storage system using CFD10.1016/j.apenergy.2012.10.040 ↗
9. Thermal conductivity and latent heat thermal energy storage characteristics of paraffin/expanded graphite composite as phase change material10.1016/j.applthermaleng.2006.11.004 ↗
10. Thermal conductivity enhancement of phase change materials using a graphite matrix10.1016/j.applthermaleng.2005.11.022 ↗
11. Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container10.1016/j.ijthermalsci.2011.08.006 ↗
12. Melting of nanoparticle-enhanced paraffin wax in a rectangular enclosure with partially active walls10.1016/j.ijheatmasstransfer.2016.08.017 ↗
13. Nanostructures assisted melting of phase change materials in various cavities10.1016/j.applthermaleng.2016.09.093 ↗
14. Synergistic enhancement of thermal conductivity for expanded graphite and carbon fiber in paraffin/EVA form-stable phase change materials10.1016/j.solener.2016.01.011 ↗
15. Pore-scale and volume-averaged numerical simulations of melting phase change heat transfer in finned metal foam10.1016/j.ijheatmasstransfer.2015.06.088 ↗
16. The effect of pore size and porosity on thermal management performance of phase change material infiltrated microcellular metal foams10.1016/j.applthermaleng.2013.11.072 ↗
17. Numerical analysis on thermal behavior of solid–liquid phase change within copper foam with varying porosity10.1016/j.ijheatmasstransfer.2015.01.088 ↗
18. Heat transfer characteristics of thermal energy storage system using PCM capsules: a review10.1016/j.rser.2007.06.009 ↗
19. Novel segregated-structure phase change materials composed of paraffin@graphene microencapsules with high latent heat and thermal conductivity10.1007/s10853-017-1693-2 ↗
20. Graphene oxide-modified microencapsulated phase change materials with high encapsulation capacity and enhanced leakage-prevention performance10.1016/j.apenergy.2017.04.041 ↗
21. Modified phase change microcapsules with calcium carbonate and graphene oxide shells for enhanced energy storage and leakage prevention10.1021/acssuschemeng.7b04834 ↗
22. Experimental and numerical study on the effective thermal conductivity of paraffin/expanded graphite composite10.1016/j.solmat.2014.06.023 ↗
23. Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model10.1016/j.enconman.2014.11.040 ↗
24. A novel sebacic acid/expanded graphite composite phase change material for solar thermal medium-temperature applications10.1016/j.solener.2013.11.018 ↗
25. Analysis of the influence of operating conditions and geometric parameters on heat transfer in water-paraffin shell-and-tube latent thermal energy storage unit10.1016/j.applthermaleng.2006.02.004 ↗
26. Transient cooling of electronics using phase change material (PCM)-based heat sinks10.1016/j.applthermaleng.2007.06.010 ↗