Critical role of Zn/Sn ratio to enhance Cu-Zn-Sn-S solar cell efficiency by suppressing detrimental Cu2-xS secondary phase
Source abstract
Abstract
Abstract The co-existing secondary phases, in off-stoichiometric Cu-Zn-Sn-S (CZTS) solar cells, are one of the main causes of performance gap between earth abundant CZTS and matured Cu-In-Ga-Se (CIGS) solar cells technology. Highly metallic Cu-S based secondary phases provide shunting paths to the current flow and critically affect the device performance. Several chemical etchants have been developed and used to remove conductive Cu2-xS phase from CZTS absorber surface before device fabrication. Present work is mainly focused to tune the Zn/Sn composition ratio in co-sputtered CZTS active layer to suppress the formation of Cu2-xS phase during the growth itself to eliminate the additional step of etching in device fabrication. Significant reduction of Cu2-xS secondary phase was observed with decreased Zn/Sn ratio, which resulted in more than 3 times efficiency enhancement for the final composition. The fabricated solar cell in the stacking order of Ag/ITO/i-ZnO/CdS/CZTS/Mo/SLG with optimum composition showed an efficiency of 6.11% without any antireflection coating. Controlling the Zn/Sn ratio resulted in an effective and virtuous solution to avoid the detrimental secondary phases like Cu2-xS, which conventionally required a chemical etching treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS-Se solar cells
2. Enhanced conversion efficiencies of Cu 2 ZnSnS 4 -based thin film solar cells by using preferential etching technique10.1143/APEX.1.041201 ↗
3. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
4. Pure sulfide Cu2ZnSnS4 thin film solar cells fabricated by preheating an electrodeposited metallic stack10.1002/aenm.201301381 ↗
5. Device characteristics of CZTSSe thin‐film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
6. Cu2ZnSnS4 photovoltaic cell with improved efficiency fabricated by high-temperature annealing after CdS buffer-layer deposition10.1002/pip.2837 ↗
7. 10% Efficiency Cu2ZnSn(S,Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
8. Strategic review of interface carrier recombination in earth abundant Cu-Zn-Sn-S-Se solar cells: current challenges and future prospective10.1039/C6TA10543B ↗
9. Evolution of detrimental secondary phases in unstable Cu2ZnSnS4 films during annealing10.1007/s13391-015-5340-2 ↗
10. Optimization of post-deposition annealing in Cu2ZnSnS4 thin film solar cells and its impact on device performance10.1016/j.solmat.2017.05.065 ↗
11. On the Sn loss from thin films of the material system Cu–Zn–Sn–S in high vacuum10.1063/1.3273495 ↗
12. A detrimental reaction at the molybdenum back contact in Cu2ZnSn (S, Se) 4 thin-film solar cells10.1021/ja308862n ↗
13. Chemical insights into the instability of Cu2ZnSnS4 films during annealing10.1021/cm202379s ↗
14. Searching for a fabrication route of efficient Cu 2 ZnSnS 4 solar cells by post-sulfuration of co-sputtered Sn-enriched precursors10.1039/C5TC02486B ↗
15. Studies on Cu 2 ZnSnS 4 (CZTS) absorber layer using different stacking orders in precursor thin films10.1016/j.solmat.2011.07.005 ↗
16. Secondary phase and Cu substitutional defect dynamics in kesterite solar cells: impact on optoelectronic properties10.1016/j.solmat.2016.01.029 ↗
17. Sulfurization induced surface constitution and its correlation to the performance of solution-processed Cu2ZnSn (S, Se) 4 solar cells10.1038/srep06288 ↗
18. p–n junction improvements of Cu 2 ZnSnS 4/CdS monograin layer solar cells10.1016/j.apsusc.2015.09.094 ↗
19. Impact of KCN etching on the chemical and electronic surface structure of Cu2ZnSnS4 thin-film solar cell absorbers10.1063/1.3650717 ↗
20. KCN chemical etch for interface engineering in Cu2ZnSnSe4 solar cells10.1021/acsami.5b02122 ↗
21. Development of a selective chemical etch to improve the conversion efficiency of Zn-rich Cu2ZnSnS4 solar cells10.1021/ja301373e ↗
22. Earth-abundant Cu2ZnSn(S,Se)4 (CZTSSe) solar cells
23. Characterization of a CZTS thin film solar cell grown by sputtering method10.1016/j.solener.2013.11.035 ↗
24. Secondary phases and their influence on the composition of the kesterite phase in CZTS and CZTSe thin films10.1039/C6CP00178E ↗
25. Tailoring the defects and carrier density for beyond 10% efficient CZTSe thin film solar cells10.1016/j.solmat.2016.09.034 ↗
26. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth‐abundant solar cell absorbers10.1002/adma.201203146 ↗
27. Characterization of chemical bath deposited CdS thin films at different deposition temperature10.1016/j.jallcom.2009.12.088 ↗
28. Comparative study of Cu 2 ZnSnS 4 film growth10.1016/j.solmat.2010.04.060 ↗
29. Influence of sintering temperature on screen printed Cu 2 ZnSnS 4 (CZTS) films10.1016/j.jallcom.2012.06.069 ↗
30. Raman scattering analysis of the surface chemistry of kesterites: impact of post-deposition annealing and Cu/Zn reordering on solar cell performance10.1016/j.solmat.2016.07.009 ↗
31. Multiwavelength excitation Raman scattering study of polycrystalline kesterite Cu2ZnSnS4 thin films10.1063/1.4861593 ↗
32. Sputter grown sub-micrometer thick Cu2ZnSnS4 thin film for photovoltaic device application10.1016/j.matlet.2015.07.089 ↗
33. Chemical composition dependence of morphological and optical properties of Cu 2 ZnSnS 4 thin films deposited by sol–gel sulfurization and Cu 2 ZnSnS 4 thin film solar cell efficiency10.1016/j.solmat.2010.10.031 ↗
34. Cu 2 ZnSnS 4 as a potential photovoltaic material: a hybrid Hartree-Fock density functional theory study10.1103/PhysRevB.79.115126 ↗
35. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
36. The interpretation of the properties of indium antimonide10.1088/0370-1301/67/10/306 ↗
37. Band gap change induced by defect complexes in Cu 2 ZnSnS 410.1016/j.tsf.2012.10.030 ↗
38. Effects of the compositional ratio distribution with sulfurization temperatures in the absorber layer on the defect and surface electrical characteristics of Cu2ZnSnS4 solar cells10.1002/pip.2619 ↗
39. The size controlled synthesis and self-assembled of monodisperse Cu 2 S nanocrystals10.1016/j.matlet.2011.09.025 ↗
40. On the growth process of Cu2ZnSn(S,Se)4 absorber layer formed by selenizing Cu–ZnS–SnS precursors and its photovoltaic performance10.1016/j.solmat.2014.09.023 ↗
41. A comprehensive study on the mechanism behind formation and depletion of Cu 2 ZnSnS 4 (CZTS) phases10.1039/C5CE00661A ↗
42. Suppression of the Cu2-x secondary phases in CZTS films through controlling the film elemental composition10.1109/JPHOTOV.2015.2447834 ↗
43. Vibrational properties of stannite and kesterite type compounds: Raman scattering analysis of Cu 2 (Fe, Zn) SnS 410.1016/j.jallcom.2012.06.042 ↗
44. Effect of post-sulfurization on the structural and optical properties of Cu 2 ZnSnS 4 thin films deposited by vacuum evaporation method10.1016/j.tsf.2014.12.032 ↗
45. Determining and controlling the stoichiometry of Cu2ZnSnS4 photovoltaics: the physics and its implications10.1021/acs.chemmater.6b01612 ↗
46. Effect of sulfurization time on the properties of copper zinc tin sulfide thin films grown by electrochemical deposition10.1038/srep32431 ↗
47. Phase evolution of Cu 2 ZnSnS 4 (CZTS) kesterite thin films during the sulfurization process10.1016/j.ceramint.2015.06.145 ↗
48. Phase selective synthesis of metastable orthorhombic Cu 2 ZnSnS 410.1039/c2jm16870g ↗
49. A heating-up method for the synthesis of pure phase kesterite Cu 2 ZnSnS 4 nanocrystals using a simple coordinating sulphur precursor10.1039/C4RA13252A ↗
50. Colloidal synthesis of wurtzite Cu2ZnSnS4 nanorods and their perpendicular assembly10.1021/ja2112146 ↗
51. Low cost preparation of Cu 2 ZnSnS 4 and Cu 2 ZnSn (S x Se 1− x) 4 from binary sulfide nanoparticles for solar cell application10.1016/j.jpowsour.2014.03.075 ↗
52. A low-temperature formation path toward highly efficient Se-free Cu2ZnSnS4 solar cells fabricated through sputtering and sulfurization10.1039/C5CE02279G ↗
53. Crystallization behaviour of co-sputtered Cu2ZnSnS4 precursor prepared by sequential sulfurization processes10.1088/0957-4484/24/9/095706 ↗
54. 7.1% efficient co-electroplated Cu 2 ZnSnS 4 thin film solar cells with sputtered CdS buffer layers10.1039/C5GC02057C ↗
55. H. Hiroi, N. Sakai, T. Kato, H. Sugimoto, High voltage Cu 2 ZnSnS 4 submodules by hybrid buffer layer, in: Proceedings of the IEEE 39th Photovoltaic Specialists Conference (PVSC), 2013, pp. 0863–0866.10.1109/PVSC.2013.6744281 ↗
56. Impact of molybdenum out diffusion and interface quality on the performance of sputter grown CZTS based solar cells10.1038/s41598-017-01605-7 ↗
57. What is the bandgap of kesterite?10.1016/j.solmat.2015.10.017 ↗
58. Nanometre-scale optical property fluctuations in Cu2ZnSnS4 revealed by low temperature cathodoluminescence10.1016/j.solmat.2017.08.028 ↗
59. Band tailing and efficiency limitation in kesterite solar cells10.1063/1.4820250 ↗
60. Earth-abundant and low-cost CZTS solar cell on flexible molybdenum foil10.1039/C4RA02064B ↗
61. A 5.5% efficient co-electrodeposited ZnO/CdS/Cu2ZnSnS4/Mo thin film solar cell10.1016/j.solmat.2014.02.020 ↗
62. Optoelectronic and spectroscopic characterization of vapour-transport grown Cu 2 ZnSnS 4 single crystals10.1039/C6TA09817G ↗