Direct comparison of the electrical properties of multicrystalline silicon materials for solar cells: conventional p-type, n-type and high performance p-type
Source abstract
Abstract
Abstract We compare the recombination properties of three important types of multicrystalline silicon wafers for solar cells, namely conventionally-solidified p-type and n-type multicrystalline wafers, and also the recently developed ‘high performance’ p-type multicrystalline wafers. Three distinct regions of the wafers are examined in detail. These are the intra-grain regions, the grain boundaries, and the dislocation networks. The response of these regions to phosphorous gettering and hydrogenation are also characterised and compared. The electrical properties of intra-grain regions are assessed based on both the minority carrier lifetime and diffusion length. The recombination activities of grain boundaries are compared quantitatively in terms of their effective surface recombination velocities. The recombination behaviour of dislocations is evaluated qualitatively based on photoluminescence images. Our results show that the main performance limiting factors are likely to be recombination at crystal defects. Overall, grain boundaries in conventional p-type samples are more recombination active than those in high performance p-type and conventional n-type samples. The benefits of hydrogenation are most visible on n-type samples, leading to significant deactivation of most of the grain boundaries. As-grown grain boundaries and dislocations in high performance multicrystalline silicon tend not to be recombination active, and only become active after either gettering or hydrogenation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Directional growth method to obtain high quality polycrystalline silicon from its melt10.1016/j.jcrysgro.2006.04.016 ↗
2. Seed-assisted cast quasi-single crystalline silicon for photovoltaic application: towards high efficiency and low cost silicon solar cells10.1016/j.solmat.2012.02.024 ↗
3. Development of high-performance multicrystalline silicon for photovoltaic industry10.1002/pip.2437 ↗
4. Grain control in directional solidification of photovoltaic silicon10.1016/j.jcrysgro.2012.01.007 ↗
5. Study of evolution of dislocation clusters in high performance multicrystalline silicon10.1016/j.solmat.2014.02.034 ↗
6. P.J. Cousins, D.D. Smith, L. Hsin-Chiao, J. Manning, T.D. Dennis, A. Waldhauer, K.E. Wilson, G. Harley, W.P. Mulligan. Generation 3: improved performance at lower cost, in: Proceedings of the 35th IEEE, Photovoltaic Specialists Conference (PVSC), 2010. pp. 000275–000278.10.1109/PVSC.2010.5615850 ↗
7. Solar cell efficiency tables (Version 45)10.1002/pip.2573 ↗
8. Panasonic Press Release, Panasonic HIT® Solar Cell Achieves World’s Highest Energy Conversion Efficiency of 25.6% at Research Level.
9. Electronic properties of light-induced recombination centers in boron-doped Czochralski silicon10.1063/1.371186 ↗
10. Fundamental Boron–Oxygen-related carrier lifetime limit in mono- and multicrystalline silicon10.1002/pip.586 ↗
11. Recombination activity of interstitial iron and other transition metal point defects in p- and n-type crystalline silicon10.1063/1.1812833 ↗
12. Potential gain in multicrystalline silicon solar cell efficiency by n-type doping10.1109/JPHOTOV.2014.2377554 ↗
13. PC1D version 5: 32-bit solar cell modelling on personal computers, in: Proceedings of the 26th IEEE Photovoltaic Specialists Conference, Anaheim, 1997, pp. 207–210.
14. Synopsys, Sentaurus Device User Guide, Version 2013.03, 2013.
15. Precipitates and hydrogen passivation at crystal defects in n- and p-type multicrystalline silicon10.1063/1.2800271 ↗
16. Millisecond minority carrier lifetimes in n-type multicrystalline silicon10.1063/1.1529089 ↗
17. Efficacy of phosphorus gettering and hydrogenation in multicrystalline silicon
18. On the electronic improvement of multi‐crystalline silicon via gettering and hydrogenation10.1002/pip.775 ↗
19. Carrier de-smearing of photoluminescence images on silicon wafers using the continuity equation10.1063/1.4829658 ↗
20. Quantifying carrier recombination at grain boundaries in multicrystalline silicon wafers through photoluminescence imaging10.1063/1.4904963 ↗
21. Concentration and penetration depth of H introduced into crystalline Si by hydrogenation methods used to fabricate solar cells10.1063/1.2363684 ↗
22. Improved iron gettering of contaminated multicrystalline silicon by high-temperature phosphorus diffusion10.1063/1.4808310 ↗
23. Improved phosphorous gettering of multicrystalline silicon10.1016/j.solmat.2005.05.015 ↗
24. Improvement of multicrystalline silicon solar cells by a low temperature anneal after emitter diffusion10.1002/pip.1002 ↗
25. The impact of silicon CCD photon spread on quantitative analyses of luminescence images10.1109/JPHOTOV.2013.2287912 ↗
26. An accurate method for calibrating photoluminescence-based lifetime images on multi-crystalline silicon wafers10.1016/j.solmat.2014.06.004 ↗
27. R.A. Sinton, Predicting multi-crystalline solar cell efficiency from life-time measured during cell fabrication, in: Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion, 2003, Vol. 1022, pp. 1028–1031.
28. Reduced fill factors in multicrystalline silicon solar cells due to injection-level dependent bulk recombination lifetimes10.1002/1099-159X(200007/08)8:4<363::AID-PIP328>3.0.CO;2-Y ↗
29. Electron-beam-induced current study of grain boundaries in multicrystalline silicon10.1063/1.1797548 ↗
30. Chemical natures and distributions of metal impurities in multicrystalline silicon materials10.1002/pip.690 ↗
31. Transition metal co-precipitation mechanisms in silicon10.1016/j.actamat.2007.07.030 ↗
32. Impact of phosphorous gettering and hydrogenation on the surface recombination velocity of grain boundaries in p-Type multicrystalline silicon, photovoltaics
33. A unified approach to modelling the charge state of monatomic hydrogen and other defects in crystalline silicon10.1063/1.4906465 ↗
34. Metal precipitation at grain boundaries in silicon: dependence on grain boundary character and dislocation decoration10.1063/1.2234570 ↗
35. Interstitial iron impurities at grain boundaries in silicon: a first-principles study10.1103/PhysRevB.91.035309 ↗
36. Modelling silicon characterisation10.1016/j.egypro.2011.06.108 ↗
37. Electronic states at dislocations and metal silicide precipitates in crystalline silicon and their role in solar cell materials10.1007/s00339-008-5027-8 ↗
38. Recombination activity of contaminated dislocations in silicon: a model describing electron-beam-induced current contrast behavior10.1103/PhysRevB.63.115208 ↗
39. P.P. Altermatt, A. Cuevas, G. Heiser, Modelling the impact of inhomogeneous recombination losses on mc-Si cell efficiency, in: Proceedings of Technical Digest of the 14th International Photovoltaic Science and Engineering Conference, Bangkok, Thailand, 2004, pp. 243–244.
40. Efficiency limiting bulk recombination in multicrystalline silicon solar cells10.1016/j.solmat.2011.11.047 ↗
41. The reliability of thermography- and luminescence-based series resistance and saturation current density imaging10.1016/j.solmat.2015.01.017 ↗