journal article·2011-05

Influence of substrate on crystallization in polythiophene/fullerene blends

Christine He, David S. Germack, R. Joseph Kline, Dean M. Delongchamp, Daniel A. Fischer, Chad R. Snyder, Michael F. Toney, James G. Kushmerick, Lee J. Richter

Publisher page

Abstract

Abstract The nanoscale morphology of the active layer in organic, bulk heterojunction (BHJ) solar cells is crucial to device performance. Often a combination of casting conditions and post deposition thermal treatment is used to optimize the morphology. In general, the development of microscopic crystals is deleterious, as the exciton diffusion length is ≈10 nm. We find that the microscopic crystallization behavior in polythiophene/fullerene blends is strongly influenced by the substrate on which the BHJ is cast. With a silicon oxide substrate, the crystal nucleation density is high and significant crystallization occurs at a temperature of 140 °C. On more hydrophobic substrates, significantly higher temperatures are required for observable crystallization. This difference is attributed to the interfacial segregation of the PCBM, controlled by the substrate surface energy. The substrate dependence of crystallization has significant implications on the fullerene crystal growth mechanisms and practical implications for device studies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Powering the planet10.1557/mrs2007.168 ↗
2. Polymer–fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
3. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
4. Analysis of the failure mechanism for a stable organic photovoltaic during 10,000h of testing10.1002/pip.794 ↗
5. Three-dimensional nanoscale organization of polymer solar cells10.1039/b900901a ↗
6. Manipulating regioregular poly(3-hexylthiophene): [6,6]-phenyl-C-61-butyric acid methyl ester blends – route towards high efficiency polymer solar cells10.1039/b703075b ↗
7. The role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
8. Certain commercial equipment, instruments, or materials are identified in this paper to foster understanding. Such identification does not imply recommendation or endorsement by the National Institute of Standards and Technology, nor does it imply that the materials or equipment identified are necessarily the best one available for this purpose.
9. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
10. Substrate surface energy dependent morphology and dewetting in an ABC triblock copolymer film10.1021/la062707q ↗
11. X-ray scattering study of thin films of poly(2,5-bis(3-alkylthiophen-2-yl)thieno3,2-b]thiophene10.1021/ja0670714 ↗
12. Tuning the dimensions of C-60-based needlelike crystals in blended thin films10.1002/adfm.200500812 ↗
13. Scanning near-field and confocal Raman microscopic investigation of P3HT–PCBM systems for solar cell applications10.1021/ma052590x ↗
14. A quantitative study of PCBM diffusion during annealing of P3HT:PCBM blend films10.1021/ma901444u ↗
15. Time-dependent morphology evolution by annealing processes on polymer:fullerene blend solar cells10.1002/adfm.200800968 ↗
16. Dual crystallization behaviour of polythiophene/fullerene blends10.1051/epjap:2006138 ↗
17. Radially symmetric phase growth controlled by diffusion
18. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
19. The influence of poly(3-hexylthiophene) regioregularity on fullerene-composite solar cell performance10.1021/ja806493n ↗
20. Device annealing effect in organic solar cells with blends of regioregular poly(3-hexylthiophene) and soluble fullerene
21. Effect of spatial confinement on the morphology evolution of thin poly(p-phenylenevinylene)/methanofullerene composite films10.1021/ma047589x ↗
22. Effects of thermal annealing upon the morphology of polymer–fullerene blends10.1002/adfm.201000975 ↗
23. Abrupt morphology change upon thermal annealing in poly(3-hexylthiophene)/soluble fullerene blend films for polymer solar cells10.1002/adfm.200901655 ↗
24. Quantitative insight into morphology evolution of thin PPV/PCBM composite films upon thermal treatment10.1021/ma0520803 ↗
25. Substrate-dependent interface composition and charge transport in films for organic photovoltaics10.1063/1.3149706 ↗
26. Vertical phase separation in poly(3-hexylthiophene): fullerene derivative blends and its advantage for inverted structure solar cells10.1002/adfm.200801286 ↗
27. Depletion of PCBM at the cathode interface in P3HT/PCBM thin films as quantified via neutron reflectivity measurements10.1002/adma.200903971 ↗
28. Interfacial segregation in polymer/fullerene blend films for photovoltaic devices10.1021/ma100027b ↗
29. In situ Wilhelmy balance surface energy determination of poly(3-hexylthiophene) and poly(3,4-ethylenedioxythiophene) during electrochemical doping–dedoping10.1021/la061606p ↗
30. Critical surface tension of glass10.1021/j100791a510 ↗
31. Measuring the extent of phase separation in poly-3-hexylthiophene/phenyl-C-61-butyric acid methyl ester photovoltaic blends with H-1 spin diffusion NMR spectroscopy10.1021/cm100237m ↗
32. Binary organic photovoltaic blends: a simple rationale for optimum compositions10.1002/adma.200800963 ↗
33. Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology10.1021/jp804151a ↗
34. Controlling film morphology in conjugated polymer: fullerene blends with surface patterning10.1021/ja804088j ↗
35. All-polymer photovoltaic devices of poly(3-(4-n-octyl)-phenylthiophene) from Grignard metathesis (GRIM) polymerization10.1021/ja9059359 ↗
36. Recent progress in polymer solar cells: manipulation of polymer: fullerene morphology and the formation of efficient inverted polymer solar cells10.1002/adma.200802854 ↗