Development of CuInS2-based solar cells and modules
Source abstract
Abstract
Abstract Starting from a small area cell published in 1993, CuInS2 technology has been continuously improved with respect to performance and manufacturability. Major milestones include successful preparation by rapid thermal processing, a monolithically integrated module test structure on a 5×5 cm2 substrate, implementation of an industrial pilot line, incorporation of gallium for higher open circuit voltages and better performance and demonstration of Cd-free devices. Phase formation, reaction pathways and interdiffusion mechanisms have been investigated and modelled as have been electronic and device properties such as current transport. This review summarizes the most significant aspects of development and our current understanding of the technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Solar cells based on CuInS2—an overview10.1016/j.tsf.2004.11.042 ↗
2. A. Neisser, A. Meeder, F. Zetsche, U. Rühle, Ch. Von Klopmann, R. Stroh, N. Meyer, Manufacturing of large-area CuInS2 solar modules—from pilot to mass production, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, pp. 2460–2465.
3. Advanced diagnostic and control methods of processes and layers in CIGS solar cells and modules10.1002/pip.966 ↗
4. Ch. Köble, J. Klaer, R. Klenk, M.Ch. Lux-Steiner, Stability of CuInS2 module test structures under reverse bias stress, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 4–8 September 2006, Dresden, Germany, pp. 1962–1964.
5. T. Enzenhofer, T. Unold, H.-W. Schock, Photoluminescence and Raman spectroscopy on doped CuInS2 thin films for solar cells, in: Proceedings of the 21st European Photovoltaic Solar Energy Conference, 4–8 September 2006, Dresden, Germany, pp. 1983–1985.
6. Investigation of the influence of silver on the crystal growth of CuInS2 thin films10.1016/S0040-6090(99)00774-9 ↗
7. I. Hengel, R. Klenk, E. García Víllora, M.Ch. Lux-Steiner, Isovalent and non-isovalent substitutions in CuInS2, in: Proceedings of the 2nd World Conference on Photovoltaic Solar Energy Conversion, 6–10 July 1998, Vienna, Austria, pp. 545–548.
8. Atomic hydrogen introduction into CuInS2 thin films by broad beam low energy implantation technique
9. Improved performance of thin film solar cells based on Cu(In,Ga)S210.1016/S0040-6090(02)00554-0 ↗
10. S. Merdes, D. Abou-Ras, R. Klenk, M.Ch. Lux-Steiner, A. Meeder, H.W. Schock, J. Klaer, A 12.8% efficient CdS/Cu(In,Ga)S2 based solar cell prepared by a rapid thermal process, in press.
11. A. Meeder, P. Schmidt-Weber, U. Hornauer, D. Förster, T. Schubert, A. Neisser, S. Merdes, High voltage Cu(In,Ga)S2 (CIGS) solar modules, presented at E-MRS 2010 Spring Meeting, 7–11 June, 2010, Strasbourg, France. Thin Solid Films, submitted for publication.10.1016/j.tsf.2011.01.096 ↗
12. CuInS2 based solar cell with 10.2% efficiency10.1063/1.110786 ↗
13. Sequential processes for the deposition of polycrystalline Cu(In,Ga)(S,Se)2 thin films: growth mechanism and devices10.1016/0927-0248(95)00103-4 ↗
14. Optimising the open circuit voltage of Cu(In,Ga)S2 solar cells—design and analysis10.1016/j.tsf.2003.10.135 ↗
15. High efficiency graded bandgap thin-film polycrystalline Cu(In,Ga)Se2-based solar cells10.1016/0927-0248(95)00145-X ↗
16. S. Bakehe, A. Karen, R. Kaigawa, R. Klenk, M.Ch. Lux-Steiner, Band gap grading in multi-source evaporated Cu(In,Ga)S2 thin films, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, 6–10 June 2005, Barcelona, Spain, pp. 1767–1770.
17. Three-stage evaporation of Cu(In,Ga)S2 solar cell absorber films without KCN treatment and Na control10.1016/j.tsf.2005.11.073 ↗
18. Properties of CuInS2 thin films grown by a two-step process without H2S10.1016/S0927-0248(97)00083-4 ↗
19. Efficient CuInS2 solar cells from a rapid thermal process (RTP)10.1016/S0927-0248(00)00276-2 ↗
20. CuInS2 based thin film photovoltaics10.1016/j.solener.2004.08.004 ↗
21. Recrystallization of Cu–In–S thin films studied in-situ by energy-dispersive X-ray diffraction10.1107/S0021889810025860 ↗
22. D. Thomas, R. Mainz, H. Rodriguez-Alvarez, B. Marsen, D. Abou-Ras, M. Klaus, Ch. Genzel, H.W. Schock, In-situ studies of the recrystallization process of CuInS2 thin films by energy dispersive X-ray diffraction, in: Proceedings of the E-MRS 2010 Spring Meeting, 7–11 June, 2010, Strasbourg, France, Thin Solid Films, in press.10.1016/j.tsf.2010.12.229 ↗
23. Phase formation and growth mechanism of ternary and quaternary Cu(In,Ga)S2 chalcopyrite layers10.7567/JJAPS.39S1.171 ↗
24. Th. Riedle, Th.W. Matthes, A. Neisser, R. Klenk, C. Hinrichs, N. Esser, W. Richter, M.Ch. Lux-Steiner, Preparation of CuInS2 absorber layers by rapid thermal sulfurization using DTBS and H2S, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 1–5 May 2000, Glasgow, UK, pp. 713–716.
25. Effect of Ga incorporation in sequentially prepared CuInS2 thin film absorbers10.1016/S0927-0248(00)00268-3 ↗
26. Diffusion of Ga and In in sequentially prepared Cu(In,Ga)S2 thin films for photovoltaic applications10.1557/PROC-763-B6.3 ↗
27. Cu(In,Ga)S2 phase formation from metallic Cu–In–Ga precursor stacks in rapid thermal processes10.1557/PROC-668-H1.3 ↗
28. Sulphurisation of gallium-containing thin-film precursors analysed in-situ10.1016/j.tsf.2006.12.167 ↗
29. R. Mainz, In-situ analysis and growth of photovoltaic absorbers with band gap gradients, Dissertation Freie Universität Berlin, 2009. Available online at 〈http://www.diss.fu-berlin.de/diss/receive/FUDISS_thesis_000000009066〉.
30. R. Mainz, J. Klaer, R. Klenk, N. Papathanasiou, Solar cells based on Cu(In,Ga)S2 prepared by a two-step process, in: Proceedings of the 22nd European Photovoltaic Solar Energy Conference, 3–7 September 2007, Milan, Italy, pp. 2429–2433.
31. Combined analysis of spatially resolved electronic structure and composition on a cross-section of a thin film Cu(In1–xGax)S2 solar cell10.1002/pssa.200881216 ↗
32. S. Merdes, R. Kaigawa, J. Klaer, R. Klenk, R. Mainz, A. Meeder, N. Papathanasiou, D. Abou-Ras, S. Schmidt, Increased open circuit voltage in Cu(In,Ga)S2 based solar cells prepared by rapid thermal processing of metal precursors, in: Proceedings of the 23rd European Photovoltaic Solar Energy Conference, 1–5 September 2008, Valencia, Spain, pp. 2588–2591.
33. J. Malmström, J. Wennerberg, M. Bodegård, L. Stolt, Influence of Ga on the current transport in Cu(In,Ga)Se2 thin film solar cells, VB 1.74, in: Proceedings of the 17th European Photovoltaic Solar Energy Conference, 22–26 October 2001, Munich, Germany, pp. 1–4.
34. H.W. Schock, U. Rau, T. Dullweber, G. Hanna, M. Balboul, T. Margorian-Friedelmeier, A. Jasenek, I. Kötschau, H. Kerber, H. Wiesner, High efficiency, high voltage solar cells by band gap and defect engineering in Cu(In,Ga)(S,Se)2 chalcopyrite semiconductors, in: Proceedings of the 16th European Photovoltaic Solar Energy Conference, 2000, London, U.K., pp. 301–305.
35. An 11.4% efficient polycrystalline thin film solar cell based on CuInS2 with a Cd-free buffer layer10.1016/0927-0248(95)00069-0 ↗
36. Recombination mechanisms in highly efficient thin film Zn(O,S)/Cu(In,Ga)S2 based solar cells10.1063/1.3266829 ↗
37. Size-quantized CdS films in thin film CuInS2 solar cells10.1063/1.122697 ↗
38. Electro deposited In2S3 buffer layers for CuInS2 solar cells10.1016/j.solmat.2008.04.022 ↗
39. S. Merdes, N. Allsop, A. Ennaoui, Ch.-H. Fischer, A. Grimm, D. Kieven, J. Klaer, I. Lauermann, M.Ch. Lux-Steiner, R. Mainz, A. Meeder, P. Pistor, R. Sáez-Araoz, H.W. Schock, R. Klenk, Junction formation on wide gap CuIn(Ga)S2 absorbers prepared by rapid thermal processing, Presented at the 25th European Photovoltaic Solar Energy Conference, 6–10 September 2010, Valencia, Spain.
40. CuInS2-based thin film solar cells with sputtered (Zn,Mg)O buffer10.1016/j.tsf.2009.03.226 ↗
41. A. Grimm, R. Klenk, S. Lehmann, A. Neisser, I. Lauermann, Deposition of Zn(O,S) buffer layers by reactive sputtering, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, pp. 2905–2907.
42. Sputtered Zn(O,S) for junction formation in chalcopyrite-based thin film solar cells10.1002/pssr.201004083 ↗
43. R. Klenk, Chalcopyrite solar cells and modules, in: K. Ellmer, A. Klein, B. Rech (Eds.), Transparent Conductive Zinc Oxide—Basics and Applications in Thin Film Solar Cells. Springer Series in Materials Science, vol. 104, and references therein, Springer, Berlin/Heidelberg/New York, 2008, pp. 415–437.10.1007/978-3-540-73612-7_9 ↗
44. Ch. Köble, D. Greiner, J. Klaer, I. Lauermann, R. Klenk, The role of undoped ZnO in CuInS2 based thin film solar modules, in: Proceedings of the 24th European Photovoltaic Solar Energy Conference, 21–25 September 2009, Hamburg, Germany, pp. 2924–2927.
45. DC reactive sputtering of aluminium doped zinc oxide films for solar modules controlled by target voltage10.1016/j.tsf.2009.05.055 ↗
46. Ch. Köble, D. Greiner, J. Klaer, R. Klenk, F. Ruske, Reactive sputtering of ZnO/ZnO:Al contacts for chalcopyrite solar modules, in: Proceedings of the 3rd International Symposium on Transparent Conductive Materials, 17–21 October 2010, Analipsi/Hersonissos, Crete, Greece, Thin Solid Films, submitted for publication.
47. J. Klaer, R. Klenk, A. Boden, A. Neisser, Ch. Kaufmann, R. Scheer, H.W. Schock, Damp heat stability of chalcopyrite mini-modules: evaluation of specific test structures, in: Proceedings of the 31st IEEE Photovoltaic Specialists Conference, 3–7 January 2005, Orlando, Florida, pp. 336–339.10.1109/PVSC.2005.1488137 ↗
48. J. Klaer, R. Klenk, C. Köble, A. Boden, R. Scheer, H.W. Schock, Stability issues of chalcopyrite photovoltaic devices, in: Proceedings of the 20th European Photovoltaic Solar Energy Conference, 6–10 June 2005, Barcelona, pp. 1914–1917.
49. Influence of damp heat on the electrical and optical properties of Al-doped zinc oxide10.1016/j.tsf.2008.10.107 ↗
50. D. Greiner, S.E. Gledhill, Ch. Köble, J. Krammer, R. Klenk, Damp heat stability of Al-doped zinc oxide films on smooth and rough substrates, in: Proceedings of the 3rd International Symposium on Transparent Conductive Materials, 17–21 October 2010, Analipsi/Hersonissos, Crete, Greece, Thin Solid Films, submitted for publication.
51. Optical modeling of chalcopyrite-based tandems considering realistic layer properties10.1063/1.3077613 ↗
52. S. Bakehe, R. Klenk, M.Ch. Lux-Steiner, Wide-gap Cu(In,Ga)S2 thin film solar cells on transparent substrates, in: Proceedings of the 19th European Photovoltaic Solar Energy Conference, 7–11 June 2004, Paris, France, pp. 1714–1717.
53. Tandem solar cells with Cu(In,Ga)S2 top cells on ZnO coated substrates10.1016/j.solmat.2010.06.029 ↗