journal article·2011-07

The effect of precursor aging on the morphology and electrochromic performance of electrodeposited tungsten oxide films

M. Giannouli, G. Leftheriotis

Publisher page

Abstract

Abstract Tungsten oxide films that have larger effective surface area or extensive grain boundaries tend to be more suitable for use in electrochromic devices. We propose in this paper a simple methodology for increasing the roughness and thus the effective surface area of WO3 films. This method is based on the tendency of the peroxytungstate precursor to form large aggregates within its solution with time. To this aim, a systematic study of the precursor aging effect on the resulting WO3 film properties was conducted. It was established that with increasing aging time of the precursor solution, more and larger aggregates are formed, which are then deposited on the film surface. The deposition of the aggregates causes the formation of large cracks on the film surface, thereby increasing its effective area. An optimum of the precursor aging time was found to be around 80 h. Films prepared with such an aged solution were found to have the highest Li+ diffusion coefficient and voltammetrically intercalated charge density per unit film thickness. It was also observed that the coloration efficiency of films prepared using the aforementioned method was higher than that of equivalent electron-gun deposited films throughout the visible spectrum and especially in the near infrared. The enhanced properties of these films indicate their improved electrochromic performance, which is mainly due to their increased surface area.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Conducting polymers and applications · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Granqvist · 1995
2. Opportunities and challenges in science and technology of WO3 for electrochromic and related applications10.1016/j.solmat.2007.01.026 ↗
3. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
4. Properties, performance and current status of the laminated electrochromic glass of Gesimat10.1016/j.solmat.2009.05.010 ↗
5. Electrochromic characteristics of fibrous reticulated WO3 thin films prepared by pulsed spray pyrolysis technique10.1016/j.solmat.2007.03.005 ↗
6. Structural and electrochemical studies of WO3 films deposited by pulsed spray pyrolysis10.1016/j.solmat.2006.03.033 ↗
7. Sol–gel electrochromic coatings and devices: a review10.1016/S0927-0248(00)00369-X ↗
8. Annealing induced microstructural evolution of electrodeposited electrochromic tungsten oxide films10.1016/j.apsusc.2005.02.123 ↗
9. Novel low density mesoporous WO3 films prepared by electrodeposition10.1016/j.cap.2005.11.035 ↗
10. Electrochromic properties of cesium tungstate with pyrochlore structure10.1016/0040-6090(91)90475-D ↗
11. Electrochromic WO3 films prepared by a new electrodeposition method10.1016/S0927-0248(00)00043-X ↗
12. Microstructural and electrochromic characteristics of electrodeposited and annealed WO3 films10.1016/j.ssi.2004.10.006 ↗
13. Peroxotungstic acid coated films for electrochromic display devices10.1143/JJAP.25.1420 ↗
14. Mechanism of WO3 electrodeposition from peroxy-tungstate solution10.1149/1.1837657 ↗
15. A simplified method for WO3 electrodeposition10.1149/1.1509070 ↗
16. Development of electrodeposited WO3 films with modified surface morphology and improved electrochromic properties10.1016/j.ssi.2008.07.018 ↗
17. Advanced electrochromic devices based on WO3 thin films10.1016/S0013-4686(01)00393-0 ↗
18. Dependence of the estimated diffusion coefficient of LixWO3 films on the scan rate of cyclic voltammetry experiments10.1016/j.ssi.2006.12.019 ↗
19. Study of WO3 films with textured surfaces for improved electrochromic performance10.1016/S0167-2738(00)00827-4 ↗
20. Size-controlled Ag nanoparticle modified WO3 composite films for adjustment of electrochromic properties10.1016/j.tsf.2009.07.138 ↗
21. From beads-to-wires-to-fibers of tungsten oxide: electrochromic response10.1007/s00339-009-5334-8 ↗
22. Comparison of electrochromic amorphous and crystalline electron beam deposited WO3 thin films10.1016/j.cap.2007.11.012 ↗